DC Field | Value | Language |
---|---|---|
dc.contributor.author | 강현규 | ko |
dc.contributor.author | 홍창선 | ko |
dc.contributor.author | 강동훈 | ko |
dc.contributor.author | 방형준 | ko |
dc.contributor.author | 김천곤 | ko |
dc.date.accessioned | 2015-04-08T06:48:25Z | - |
dc.date.available | 2015-04-08T06:48:25Z | - |
dc.date.created | 2015-03-26 | - |
dc.date.created | 2015-03-26 | - |
dc.date.issued | 2002-03 | - |
dc.identifier.citation | 한국항공우주학회지, v.30, no.2, pp.59 - 66 | - |
dc.identifier.issn | 1225-1348 | - |
dc.identifier.uri | http://hdl.handle.net/10203/195840 | - |
dc.description.abstract | 광섬유 브래그 격자/외부 패브리-페로 간섭 (FBG/EFPI) 복합 센서를 이용하여 여러 가지 복합재료 적층판의 성형과정 동안 발생하는 변형률과 온도를 동시에 모니터링하였다. 일방향 적층판, 대칭 직교 적층판, 그리고 평직 적층판에 대하여 각각 두 개씩의 FBG/EFPI 센서를 방향과 위치를 달리하여 삽입하고 오토클레이브 내에서의 성형 동안 복합재료 적층판 내부의 두 지점에서의 성형변형률과 온도를 실시간으로 측정하였다. 이러한 실험들을 통해 FBG/EFPI 센서는 복합재료 구조물 성형시의 스마트 모니터링에 효율적임을 알 수 있었다. | - |
dc.language | Korean | - |
dc.publisher | 한국항공우주학회 | - |
dc.title | 광섬유 센서를 이용한 복합재료 적층판의 성형 모니터링 | - |
dc.title.alternative | Cure Monitoring of Composite Laminates Using Fiber Optic Sensors | - |
dc.type | Article | - |
dc.type.rims | ART | - |
dc.citation.volume | 30 | - |
dc.citation.issue | 2 | - |
dc.citation.beginningpage | 59 | - |
dc.citation.endingpage | 66 | - |
dc.citation.publicationname | 한국항공우주학회지 | - |
dc.identifier.kciid | ART000979483 | - |
dc.contributor.localauthor | 홍창선 | - |
dc.contributor.localauthor | 김천곤 | - |
dc.contributor.nonIdAuthor | 강현규 | - |
dc.subject.keywordAuthor | Cure Monitoring(성형 모니터링) | - |
dc.subject.keywordAuthor | Fiber Optic Sensor(광섬유 센서) | - |
dc.subject.keywordAuthor | Composite(복합재료) | - |
dc.subject.keywordAuthor | Cure Monitoring(성형 모니터링) | - |
dc.subject.keywordAuthor | Fiber Optic Sensor(광섬유 센서) | - |
dc.subject.keywordAuthor | Composite(복합재료) | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.