Study on the characterization of the dynamic material properties of sheet metal for auto-body considering the pre-strain effect

Cited 0 time in webofscience Cited 0 time in scopus
  • Hit : 250
  • Download : 833
DC FieldValueLanguage
dc.contributor.authorKim, Seokbong-
dc.contributor.authorLim, Jiho-
dc.contributor.authorHuh, Hoon-
dc.date.accessioned2010-09-13T02:56:43Z-
dc.date.available2010-09-13T02:56:43Z-
dc.date.issued2003-
dc.identifier.citationproc. KSAE Fall Conference, Vol.2, pp.1513~1518en
dc.identifier.urihttp://hdl.handle.net/10203/19488-
dc.description.abstractMost parts of auto-body are produced through the sheet metal forming process, and during this process they have change of thickness and residual stress and strain remain. In this paper, to specify dynamic material properties considering this pre-strain effect, materials SPCEN, SPRC45E and SPRC35R were selected and were imposed 5, 10% pre-strains. After that using the high speed material testing machine, materials were tested at given strain rates of between 0.003 and 50 s-1. It was found from experimental results that in case of SPCEN and SPRC35R, the yield stress and ultimate stress were increased due to pre-strain effect at strain of over 10 s-1 but SPRC45E was not affected by pre-strain effect.en
dc.language.isokoen
dc.subjectPre-strain effecten
dc.subjectStrainratesen
dc.subjectHigh speed material testing machineen
dc.titleStudy on the characterization of the dynamic material properties of sheet metal for auto-body considering the pre-strain effecten
dc.typeArticleen

qr_code

  • mendeley

    citeulike


rss_1.0 rss_2.0 atom_1.0