DC Field | Value | Language |
---|---|---|
dc.contributor.author | Yeum, Chul Min | ko |
dc.contributor.author | Sohn, Hoon | ko |
dc.contributor.author | Lim, Hyung Jin | ko |
dc.contributor.author | Ihn, Jeong Beom | ko |
dc.date.accessioned | 2014-08-27 | - |
dc.date.available | 2014-08-27 | - |
dc.date.created | 2013-10-30 | - |
dc.date.created | 2013-10-30 | - |
dc.date.created | 2013-10-30 | - |
dc.date.issued | 2014-05 | - |
dc.identifier.citation | STRUCTURAL CONTROL & HEALTH MONITORING, v.21, pp.675 - 684 | - |
dc.identifier.issn | 1545-2255 | - |
dc.identifier.uri | http://hdl.handle.net/10203/187253 | - |
dc.description.abstract | This paper presents a new Lamb wave-based delamination detection technology that allows detection of delamination in a single wave propagation path without using prior baseline data or a predetermined decision boundary. This study shows that, if delamination exists along a wave propagation path, the first arrival antisymmetric (A(0)) mode is followed by other A(0) modes reflected from the inside of the delamination. Unlike other conventional Lamb wave techniques, the proposed technique takes advantage of the first A(0) mode reflected from the inside delamination to instantly identify the existence of delamination. First, the proposed study employs a dual piezoelectric transducer (PZT), which is composed of a concentric ring and disk PZT segments, for Lamb wave excitation and a circular PZT for sensing. By activating either the circular or ring PZT segment separately, two pitch-catch Lamb wave signals are obtained from the single wave propagation path. Then, a normalized A(0) mode signal is decomposed from the measured Lamb wave signals using a previously developed mode decomposition technique, and the first A(0) mode reflected from the delamination is further extracted by using a matching pursuit algorithm. Finally, a reference-free damage classifier is built on the extracted A(0) mode reflection from the delamination. Because the proposed technique does not require baseline signals during the entire delamination detection process, robust delamination detection has been achieved even under varying temperature conditions. Copyright (c) 2013 John Wiley & Sons, Ltd. | - |
dc.language | English | - |
dc.publisher | WILEY-BLACKWELL | - |
dc.title | Reference-free delamination detection using Lamb waves | - |
dc.type | Article | - |
dc.identifier.wosid | 000333698300002 | - |
dc.identifier.scopusid | 2-s2.0-84897571425 | - |
dc.type.rims | ART | - |
dc.citation.volume | 21 | - |
dc.citation.beginningpage | 675 | - |
dc.citation.endingpage | 684 | - |
dc.citation.publicationname | STRUCTURAL CONTROL & HEALTH MONITORING | - |
dc.identifier.doi | 10.1002/stc.1594 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | Sohn, Hoon | - |
dc.contributor.nonIdAuthor | Yeum, Chul Min | - |
dc.contributor.nonIdAuthor | Ihn, Jeong Beom | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | structural health monitoring | - |
dc.subject.keywordAuthor | piezoelectric transducer | - |
dc.subject.keywordAuthor | composite structure | - |
dc.subject.keywordAuthor | delamination detection | - |
dc.subject.keywordAuthor | mode decomposition | - |
dc.subject.keywordAuthor | nondestructive testing | - |
dc.subject.keywordPlus | DAMAGE DETECTION | - |
dc.subject.keywordPlus | IDENTIFICATION | - |
dc.subject.keywordPlus | TEMPERATURE | - |
dc.subject.keywordPlus | PULSE | - |
dc.subject.keywordPlus | BEAMS | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.