Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject STAINLESS-STEEL
Showing results 1 to 20 of 20
| Characterization of Nano-Sized Precipitates in a Mn-Based Lean Maraging Steel by Atom Probe Tomography Milian, J.; Ponge, D.; Raabe, D.; Choi, Pyuck-Pa; Dmitrieva, O., STEEL RESEARCH INTERNATIONAL, v.82, no.2, pp.137 - 145, 2011-02 |
| Corrosion-resistant coating for cathode current collector and wet-seal area of molten carbonate fuel cells Kim, MinJoong; Youn, Ju-Young; Lim, JeongHoon; Eom, Kwang-Sup; Cho, Eun Ae; Kwon, Hyuk-Sang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.43, no.24, pp.11363 - 11371, 2018-06 |
| Crystallization, phase evolution and corrosion of Fe-based metallic glasses: An atomic-scale structural and chemical characterization study Duarte, M. J.; Kostka, A.; Jimenez, J. A.; Choi, Pyuck-Pa; Klemm, J.; Crespo, D.; Raabe, D.; et al, ACTA MATERIALIA, v.71, pp.20 - 30, 2014-06 |
| Degradation behavior of a polymer electrolyte membrane fuel cell employing metallic bipolar plates under reverse current condition Eom, KwangSup; Cho, EunAe; Nam, Suk-Woo; Lim, Tae-Hoon; Jang, Jong Hyun; Kim, Hyoung-Juhn; Hong, Bo Ki; et al, ELECTROCHIMICA ACTA, v.78, pp.324 - 330, 2012-09 |
| Designing Heusler nanoprecipitates by elastic misfit stabilization in Fe-Mn maraging steels Milian, J; Sandlobes, S; Al-Zubi, A; Hickel, T; Choi, Pyuck-Pa; Neugebauer, J; Ponge, D; et al, ACTA MATERIALIA, v.76, pp.94 - 105, 2014-09 |
| Dynamic strain aging studied at the atomic scale Aboulfadl, H.; Deges, J.; Choi, Pyuck-Pa; Raabe, D., ACTA MATERIALIA, v.86, pp.34 - 42, 2015-03 |
| Effect of laser surface modification on the corrosion resistance of Alloy 600 Shin, JK; Suh, JH; Kim, JS; Kang, Suk-Joong L, SURFACE & COATINGS TECHNOLOGY, v.107, no.2-3, pp.94 - 100, 1998-09 |
| Effects of solution temperature on the kinetic nature of passive film on Ni Park, Kyunglin; Ahn, Sejin; Kwon, Hyuk-Sang, ELECTROCHIMICA ACTA, v.56, no.3, pp.1662 - 1669, 2011-01 |
| Effects of Temperature and Operation Parameters on the Galvanic Corrosion of Cu Coupled to Au in Organic Solderability Preservatives Process Oh, Se-Kwon; Kim, YoungJun; Jung, Ki Min; Kim, Jongsoo; Shon, MinYoung; Kwon, HyukSang, METALS AND MATERIALS INTERNATIONAL, v.23, no.2, pp.290 - 297, 2017-03 |
| Effects of Temperature and Operation Parameters on the Galvanic Corrosion of Cu Coupled to Au in Organic Solderability Preservatives Process Oh, Se-Kwon; Kim, YoungJun; Jung, Ki Min; Kim, Jongsoo; Shon, MinYoung; Kwon, HyukSang, METALS AND MATERIALS INTERNATIONAL, v.23, no.2, pp.290 - 297, 2017-03 |
| Galvanic corrosion behaviors of Cu connected to Au on a printed circuit board in ammonia solution Oh, Se-Kwon; Kim, Youngjun; Jung, Ki Min; Park, Miseok; Shon, MinYoung; Kwon, HyukSang, METALS AND MATERIALS INTERNATIONAL, v.24, no.1, pp.67 - 72, 2018-01 |
| Hardness of AISI Type 410 Martensitic Steels After High Temperature Irradiation via Nanoindentation Waseem, Owais Ahmed; Jeong, Jong-Ryul; Park, Byong-Guk; Maeng, Cheol Soo; Lee, Myoung Goo; Ryu, Ho Jin, METALS AND MATERIALS INTERNATIONAL, v.23, no.6, pp.1257 - 1265, 2017-11 |
| Investigation of IGSCC behavior of sensitized and laser-surface-melted Alloy 600 Suh, JH; Shin, JK; Kang, Suk-Joong L; Lim, YS; Kuk, IH; Kim, JS, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.254, no.1-2, pp.67 - 75, 1998-10 |
| Observation of passive films on Fe-20Cr-xNi (x=0, 10, 20 wt.%) alloys using TEM and Cs-corrected STEM-EELS Oh, Kkoch Nim; Ahn, Soohoon; Eom, KwangSup; Jung, Ki Min; Kwon, Hyuk-Sang, CORROSION SCIENCE, v.79, pp.34 - 40, 2014-02 |
| Photo-electrochemical analysis of the passive film on zircaloy-4 Lee, Sung-Joon; Cho, EunAe; Ahn, Se-Jin; Kwon, Hyuk-Sang, ELECTROCHIMICA ACTA, v.46, no.17, pp.2605 - 2611, 2001-05 |
| Pitting corrosion of the laser surface melted Alloy 600 Lim, YS; Kim, JS; Kwon, Hyuk-Sang, JOURNAL OF NUCLEAR MATERIALS, v.336, pp.65 - 72, 2005-01 |
| Segregation engineering enables nanoscale martensite to austenite phase transformation at grain boundaries: A pathway to ductile martensite Raabe, D.; Sandloebes, S.; Millan, J.; Ponge, D.; Assadi, H.; Herbig, M.; Choi, Pyuck-Pa, ACTA MATERIALIA, v.61, no.16, pp.6132 - 6152, 2013-09 |
| Segregation of boron at prior austenite grain boundaries in a quenched martensitic steel studied by atom probe tomography Li, Y. J.; Ponge, D.; Choi, Pyuck-Pa; Raabe, D., SCRIPTA MATERIALIA, v.96, pp.13 - 16, 2015-02 |
| Theoretical study of the ammonia nitridation rate on an Fe (100) surface: A combined density functional theory and kinetic Monte Carlo study Yeo, Sang Chul; Lo, Yu Chieh; Li, Ju; Lee, Hyuck-Mo, JOURNAL OF CHEMICAL PHYSICS, v.141, no.13, pp.134108-1 - 134108-8, 2014-10 |
| Thermally nitrided Cu-5.3Cr alloy for application as metallic separators in PEMFCs Lee, Hye-Youn; Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Wee, Dang-Moon, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.33, no.15, pp.4171 - 4177, 2008-08 |
Discover
Open Access
Date issued
- 2,248 2020 - 2024
- 6,675 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989