Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject PRECIPITATION
Showing results 1 to 34 of 34
| A correction to optimum alloy composition for design of high-temperature high-strength Al-Ti-V-Zr alloys through thermodynamic calculations Park, SI; Han, SZ; Lee, Zin-Hyoung; Lee, HyuckMo, SCRIPTA MATERIALIA, v.37, no.1, pp.93 - 97, 1997 |
| Amorphous (100) platelet formation in (100)Si induced by hydrogen plasma treatment Hwang, KH; Park, JW; Yoon, E; Whang, KW; Lee, JeongYong, JOURNAL OF APPLIED PHYSICS, v.81, no.1, pp.74 - 77, 1997-01 |
| Atom probe tomography of interfaces in ceramic films and oxide scales Stiller, K; Thuvander, M; Povstugar, I; Choi, Pyuck-Pa; Andre, HO, MRS BULLETIN, v.41, no.1, pp.35 - 39, 2016-01 |
| COARSENING RESISTANCE OF M2C CARBIDES IN SECONDARY HARDENING STEELS .1. THEORETICAL-MODEL FOR MULTICOMPONENT COARSENING KINETICS Lee, HyuckMo; ALLEN, SM; GRUJICIC, M, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.22, no.12, pp.2863 - 2868, 1991-12 |
| Coarsening resistance of M2C carbides in secondary hardening steels: Part III. Comparison of theory and experiment Lee, HyuckMo; Allen, Samuel M., METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.22, no.12, pp.2877 - 2888, 1991-12 |
| COMPOSITION OF M2C PHASE IN TEMPERING OF HIGH CO-NI STEELS Lee, HyuckMo; GARRATTREED, AJ; ALLEN, SM, SCRIPTA METALLURGICA ET MATERIALIA, v.25, no.3, pp.685 - 688, 1991-03 |
| Control of surface carburization and improvement of dynamic fracture behavior in tungsten heavy alloys Jung, SW; Lee, S; Kim, EP; Noh, JW; Baek, WH; Kang, Suk-Joong L, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.33, no.4, pp.1213 - 1219, 2002 |
| Development of high Mn-N duplex stainless steel for automobile structural components Toor, Ihsan-ul-Haq; Hyun, Park Jung; Kwon, Hyuk-Sang, CORROSION SCIENCE, v.50, pp.404 - 410, 2008-02 |
| Effect of boron addition on the microstructure and mechanical properties of refractory Al0.1CrNbVMo high-entropy alloy Kang, Byungchul; Kong, Taeyeong; Nguyen Huy Dan; Doan Dinh Phuong; Ryu, Ho Jin; Hong, Soon Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.100, 2021-11 |
| Effect of particles on the dynamic recrystallization behavior of Al-V-N micro-alloyed medium carbon steel Badjena, Sushant Kumar; Park, Joong-Keun, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.548, pp.126 - 133, 2012-06 |
| Effect of Recrystallization and Natural Aging on Mechanical Properties of Al-Zn-Mg-Cu-Sc Alloys Yu, Minkyu; Kwon, Oh Yeol; Park, Tae Won; Lee, Yong Yeon; Hong, Soon Hyung, KOREAN JOURNAL OF METALS AND MATERIALS, v.53, no.12, pp.844 - 850, 2015-12 |
| Effect of surface carburization on dynamic deformation and fracture of tungsten heavy alloys Jung, SW; Kim, DK; Lee, S; Noh, JW; Kang, Suk-Joong L, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.30, no.8, pp.2027 - 2035, 1999-08 |
| Effect of Ti addition on the potency of MnS for ferrite nucleation in C-Mn-V steels Park, JY; Park, Joong Keun; Choo, WY, ISIJ INTERNATIONAL, v.40, no.12, pp.1253 - 1259, 2000-12 |
| Effect of titanium nitride inclusions on the mechanical properties of direct laser deposited Inconel 718 Lim, Kwang-Hyeok; Ryou, Ken Hee; Choi, Jae Hoon; Choi, Gwanghyo; Choi, Wonseok; Lee, Jeong Hwan; Oh, Chang-Seok; et al, EXTREME MECHANICS LETTERS, v.61, 2023-06 |
| Effects of aging time on the microstructural evolution and strengthening behavior of a VCoNiMo medium-entropy alloy Kim, Young Mok; Lee, Sangwon; Kim, Ki Jeong; Jang, Tae Jin; Do, Hyeon-Seok; Jang, Kyuseon; Choi, Won Seok; et al, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.857, 2022-11 |
| Effects of Cr2N on the pitting corrosion of high nitrogen stainless steels Ha, H; Kwon, Hyuk-Sang, ELECTROCHIMICA ACTA, v.52, pp.2175 - 2180, 2007-01 |
| Effects of Nb and Ti addition and surface treatments on the electrical conductivity of 316 stainless steel as bipolar plates for PEMFC Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Chun, Dong-Hyun; Wee, Dang-Moon, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, v.45, pp.44 - 50, 2007-01 |
| Effects of niobium and titanium addition and surface treatment on electrical conductivity of 316 stainless steel as bipolar plates for proton-exchange membrane fuel cells Lee, Seok-Hyun; Kim, Jeong-Heon; Kim, Min-Chul; Wee, Dang-Moon, JOURNAL OF POWER SOURCES, v.187, no.2, pp.312 - 317, 2009-02 |
| Effects of ternary elements on phase transformation and microstructure of NiAl/Ni3Al two-phase alloys Song, SH; Kim, SH; Oh, MH; Lee, JH; Wee, Dang-Moon, INTERMETALLICS, v.13, pp.203 - 210, 2005-02 |
| Hierarchical analysis of alloying element effects on gas nitriding rate of Fe alloys: A DFT, microkinetic and kMC study Kang, Ku; Kwon, Soonho; Lee, Changsoo; Hong, Doosun; Lee, Hyuck Mo, ACTA MATERIALIA, v.174, pp.173 - 180, 2019-08 |
| Hydrothermal synthesis of spherical perovskite oxide powders using spherical gel powders Choi, JY; Kim, CH; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.81, no.5, pp.1353 - 1356, 1998-05 |
| Influence of rhenium on the microstructures and mechanical properties of a mechanically alloyed oxide dispersion-strengthened nickel-base superalloy Ko, HS; Paik, Kyung-Wook; Park, LJ; Kim, YG; Tundermann, JH, JOURNAL OF MATERIALS SCIENCE, v.33, no.13, pp.3361 - 3370, 1998-07 |
| Investigation of sputter-deposited Al-2at.%Cu layers by means of the tomographic atom probe (TAP) Choi, Pyuck-Pa; Al-Kassab, Talaat; Kirchheim, Reiner, SCRIPTA MATERIALIA, v.53, no.3, pp.323 - 327, 2005-08 |
| LATTICE MISFIT VARIATION OF AL-3 (TI,V,ZR) IN AL-TI-V-ZR ALLOYS Lee, HyuckMo; LEE, J; LEE, Zin-Hyoung, SCRIPTA METALLURGICA ET MATERIALIA, v.25, no.3, pp.517 - 520, 1991-03 |
| Matrix Penetration Of W/W Grain-Boundaries and Its Effect on Mechanical-properties of 93W-5.6Ni-1.4Fe heavy Alloy Noh, JW; Kim, EP; Song, HS; Baek, WH; Churn, KS; Kang, Suk-Joong L, METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.24, no.11, pp.2411 - 2416, 1993-11 |
| Microstructure and mechanical properties of Al-7075 alloy processed by equal channel angular pressing combined with aging treatment Shaeri, M. H.; Salehi, M. T.; Seyyedein, S. H.; Abutalebi, M. R.; Park, Joong Keun, MATERIALS & DESIGN, v.57, pp.250 - 257, 2014-05 |
| Non-toxic complexing agent Tri-sodium citrate's effect on chemical bath deposited ZnS thin films and its growth mechanism Agawane, G. L.; Shin, Seung Wook; Moholkar, A. V.; Gurav, K. V.; Yun, Jae Ho; Lee, Jeong Yong; Kim, Jin Hyeok, JOURNAL OF ALLOYS AND COMPOUNDS, v.535, pp.53 - 61, 2012-09 |
| Promotion of topologically close-packed phases in a Ru-containing Ni-based superalloy Lee, Sangwon; Do, Jeonghyeon; Jang, Kyuseon; Jun, Hosun; Park, Yejun; Choi, Pyuck-Pa, SCRIPTA MATERIALIA, v.222, 2023-01 |
| Reliable single-phase micro-joints with high melting point for 3D TSV chip stacking Tian, Ye; Fang, Heng; Ren, Ning; Zhao, Yatao; Chen, Boli; Wu, Fengshun; Paik, Kyung-Wook, JOURNAL OF ALLOYS AND COMPOUNDS, v.828, 2020-07 |
| SITE FRACTION BEHAVIOR OF TRANSITION-ELEMENTS IN AL3(TI, V, ZR) PHASE Lee, HyuckMo; LEE, H, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, v.16, pp.19 - 24, 1992 |
| Synthesis and Size Control of Tetragonal Barium Titanate Nanopowders by Facile Solvothermal Method Lee, Hyun-Wook; Moon, San; Choi, Chang-Hak; Kim, Do-Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.95, no.8, pp.2429 - 2434, 2012-08 |
| The brittleness of Ag-25%Pd based dental alloys with S contamination Shin, SR; Suh, YC; Lee, Zin-Hyoung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.358, pp.94 - 98, 2003-10 |
| The In-Situ TEM Isothermal Aging Evolution in a μ-Cu/NiAu/Sn/Cu Solder Joint for Full Intermetallic Compounds Interconnects of Flexible Electronics Liu, Jinhong; Jing, Xinyi; Chen, Jieshi; Paik, Kyung-Wook; He, Peng; Zhang, Shuye, ELECTRONIC MATERIALS LETTERS, v.20, no.3, pp.352 - 361, 2024-05 |
| TRANSITION BEHAVIOR OF DEFORMATION MODE FROM SHEARING TO LOOPING IN AL-LI SINGLE-CRYSTALS JEON, SM; Park, Joong Keun, PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, v.70, no.3, pp.493 - 504, 1994-09 |
Discover
Open Access
Date issued
- 2,248 2020 - 2024
- 6,675 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989