Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject MICROSTRUCTURE
Showing results 1 to 60 of 193
| 100 years after Griffith: From brittle bulk fracture to failure in 2D materials Kiener, Daniel; Han, Seung Min, MRS BULLETIN, v.47, no.8, pp.792 - 799, 2022-08 |
| A combinatorial approach for the synthesis and analysis of AlxCryMozNbTiZr high-entropy alloys: Oxidation behavior Waseem, Owais Ahmed; Auyeskan, Ulanbek; Lee, Hyuck-Mo; Ryu, Ho Jin, JOURNAL OF MATERIALS RESEARCH, v.33, no.19, pp.3226 - 3234, 2018-10 |
| A composition window in the TiAl-Mo-Si system suitable for lamellar structure control through seeding and directional solidification Lee, HN; Johnson, DR; Inui, H; Oh, MH; Wee, Dang-Moon; Yamaguchi, M, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.329 , no.SI, pp.19 - 24, 2002-06 |
| A new equation for the Cr equivalent in 9 to 12 Pct Cr steels Ryu, SH; Yu, Jin, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.29, no.6, pp.1573 - 1578, 1998-06 |
| A novel approach of an infrared transparent Er:Y2O3-MgO nanocomposite for eye-safe laser ceramics Ma, Ho Jin; Jung, Wook Ki; Park, Youngtae; Kim, Do Kyung, JOURNAL OF MATERIALS CHEMISTRY C, v.6, no.41, pp.11096 - 11103, 2018-11 |
| A robust approach for highly transparent Y2O3 ceramics by stabilizing oxygen defects Jung, Wook Ki; Ma, Ho Jin; Park, Youngtae; Kim, Do Kyung, SCRIPTA MATERIALIA, v.137, pp.1 - 4, 2017-08 |
| AC Impedance Spectroscopy of CaF2-doped AlN Ceramics Lee, Hyeon-Keun; Lee, Hyun Min; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.97, no.3, pp.805 - 810, 2014-03 |
| Analytical modeling to calculate the hardness of ultra-fine WC-Co cemented carbides Cha, Seung I; Lee, Kyong Ho; Ryu, Ho Jin; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.489, no.1-2, pp.234 - 244, 2008-08 |
| Atom probe tomography characterization of heavily cold drawn pearlitic steel wire Li, Y. J.; Choi, Pyuck-Pa; Borchers, C.; Chen, Y. Z.; Goto, S.; Raabe, D.; Kirchheim, R., ULTRAMICROSCOPY, v.111, no.6, pp.628 - 632, 2011-05 |
| Atomic-resolution imaging of the nanoscale origin of toughness in rare-earth doped SiC Kueck, AM; Kim, Do Kyung; Ramasse, QM; De Jonghe, LC; Ritchie, RO, NANO LETTERS, v.8, pp.2935 - 2939, 2008-09 |
| Atomic-scale compositional characterization of a nanocrystalline AlCrCuFeNiZn high-entropy alloy using atom probe tomography Pradeep, K. G.; Wanderka, N.; Choi, Pyuck-Pa; Banhart, J.; Murty, B. S.; Raabe, D., ACTA MATERIALIA, v.61, no.12, pp.4696 - 4706, 2013-07 |
| Bonding Quality of Copper-Nickel Fine Clad Metal Prepared by Surface Activated Bonding Kim, KH; Hong, Soon-Hyung; Cha, SI; Lim, SC; Kwon, HC; Yoon, WK, MATERIALS TRANSACTIONS, v.51, pp.787 - 792, 2010-04 |
| Boron nitride nanoplatelets as reinforcement material for dental ceramics Lee, Bin; Kwon, Jae-Sung; Khalid, Muhammad Waqas; Kim, Kwang-Mahn; Kim, Joonhui; Lim, Kyoung Mook; Hong, Soon Hyung, DENTAL MATERIALS, v.36, no.6, pp.744 - 754, 2020-06 |
| Carbothermic synthesis of monodispersed spherical Si3N4/SiC nanocomposite powder Choi, JY; Kim, CH; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.82, no.10, pp.2665 - 2671, 1999-10 |
| Cathodic arc plasma deposition of nano-multilayered Zr-O/Al-O thin films Kim, Sun Kyu; Van Le, Vinh; Boxman, R. L.; Zhitomirsky, V. N.; Lee, JeongYong, SURFACE COATINGS TECHNOLOGY, v.204, no.11, pp.1697 - 1701, 2010-02 |
| Characterization and superconducting properties of (Sm/Y)-Ba-Cu-O composite oxides by top-seeded melt growth in air Kim, SJ; Lee, KW; Kim, Ho Gi, JOURNAL OF CRYSTAL GROWTH, v.204, no.1-2, pp.78 - 84, 1999-07 |
| Chemical gradients across phase boundaries between martensite and austenite in steel studied by atom probe tomography and simulation Dmitrieva, O.; Ponge, D.; Inden, G.; Millan, J.; Choi, Pyuck-Pa; Sietsma, J.; Raabe, D., ACTA MATERIALIA, v.59, no.1, pp.364 - 374, 2011-01 |
| Coherency strain enhanced dielectric-temperature property of rare-earth doped BaTiO3 Jeon, Sang-Chae; Kang, Suk-Joong L., APPLIED PHYSICS LETTERS, v.102, no.11, pp.12915, 2013-03 |
| Combination of mechanical alloying and two-stage sintering of a 93W-5.6Ni-1.4Fe tungsten heavy alloy Hong, Soon-Hyung; Ryu, Ho Jin, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.344, no.1-2, pp.253 - 260, 2003-03 |
| Composition and growth rate effects in directionally solidified TiAl alloys Kim, MC; Oh, MH; Lee, JH; Inui, H; Yamaguchi, M; Wee, Dang-Moon, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.240, pp.570 - 576, 1997-12 |
| Compositional evolution of long-period stacking ordered structures in magnesium studied by atom probe tomography Kim, Jin-Kyung; Guo, Wei; Choi, Pyuck-Pa; Raabe, Dierk, SCRIPTA MATERIALIA, v.156, pp.55 - 59, 2018-11 |
| Contact damage and strength degradation in brittle/quasi-plastic silicon nitride bilayers Lee, KS; Lee, SK; Lawn, BR; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.81, no.9, pp.2394 - 2404, 1998-09 |
| Control of the Preferred Orientation of Cu(In,Ga)Se-2 Thin Film by the Surface Modification of Mo Film Shin, Dong-Hyeop; Shin, Young-Min; Kim, Ji-Hye; Ahn, Byung-Tae; Yoon, Kyung-Hoon, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.159, no.1, pp.1 - 5, 2012 |
| Controlling Ag3Sn plate formation, in near-ternary-eutectic Sn-Ag-Cu solder by minor Zn alloying Kang, SK; Shih, DY; Leonard, D; Henderson, DW; Gosselin, T; Cho, SI; Yu, Jin; et al, JOM, v.56, no.6, pp.34 - 38, 2004-06 |
| Controlling the Morphology of Side Chain Liquid Crystalline Block Copolymer Thin Films through Variations in Liquid Crystalline Content Verploegen, Eric; Zhang, Tejia; Jung, Yeon Sik; Ross, Caroline; Hammond, Paula T., NANO LETTERS, v.8, no.10, pp.3434 - 3440, 2008-10 |
| Correlation of the thermodynamic calculation and the experimental observation of Ni-Mo-Cr low alloy steel changing Ni, Mo, and Cr contents Park, Sang-Gyu; Kim, Min-Chul; Lee, Bong-Sang; Wee, Dang-Moon, JOURNAL OF NUCLEAR MATERIALS, v.407, no.2, pp.126 - 135, 2010-12 |
| Corrosion Characteristic of Pulsed Electrodeposition Nanocrystalline Ni-Co Alloy Coating Zang Xinliang; Zhao Xiqing; Park, Joong Keun; Gao Yukui; Yang Qingxiang, RARE METAL MATERIALS AND ENGINEERING, v.38, no.6, pp.1057 - 1061, 2009-06 |
| Corrosion resistance of weight reduced AlxCrFeMoV high entropy alloys Raza, Ahmad; Abdulahad, Syed; Kang, Byungchul; Ryu, Ho Jin; Hong, Soon Hyung, APPLIED SURFACE SCIENCE, v.485, pp.368 - 374, 2019-08 |
| Creep deformation of lead-free Sn-3.5Ag-Bi solders Shin, SW; Yu, Jin, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES & REVIEW PAPERS, v.42, no.3, pp.1368 - 1374, 2003-03 |
| Creep deformation of Sn-3.5Ag-xCu and Sn-3.5Ag-xBi solder joints Shin, SW; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.34, no.2, pp.188 - 195, 2005-02 |
| Crystal orientation of beta-Sn grain in Ni(P)/Sn-0.5Cu/Cu and Ni(P)/Sn-1.8Ag/Cu joints Seo, Sun-Kyoung; Cho, Moon Gi; Lee, HyuckMo, JOURNAL OF MATERIALS RESEARCH, v.25, no.10, pp.1950 - 1957, 2010-10 |
| Defect structure in thin films of a lamellar block copolymer self-assembled on neutral homogeneous and chemically nanopatterned surfaces Kim, Sang-Ouk; Kim, Bong-Hoon; Kim, Kwang-Hyon; Koo, Chong-Min; Stoykovich, Mark P.; Nealey, Paul F.; Solak, Harun H., MACROMOLECULES, v.39, no.16, pp.5466 - 5470, 2006-08 |
| Dendrite formation in the Bi2Sr2CaCu2O8-Ag system: reactions between Ag and oxide melt Shin, DC; Kang, Suk-Joong L; Chung, HS, PHYSICA C, v.340, no.2-3, pp.141 - 148, 2000-12 |
| Design of Mg-Ni alloys for fast hydrogen generation from seawater and their application in polymer electrolyte membrane fuel cells Oh, Se-Kwon; Kim, Min Joong; Eom, Kwang-Sup; Kyung, JoonSeok; Kim, DoHyang; Cho, Eun Ae; Kwon, HyukSang, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.41, no.10, pp.5296 - 5303, 2016-03 |
| Development of a Durable PEMFC Start-Up Process by Applying a Dummy Load II. Diagnostic Study Kim, Jae Hong; Cho, Eun Ae; Jang, Jong Hyun; Kim, Hyoung Juhn; Lim, Tae Hoon; Oh, In Hwan; Ko, Jae Jun; et al, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.157, no.1, pp.118 - 124, 2010 |
| Development of a novel decal transfer process for fabrication of high-performance and reliable membrane electrode assemblies for PEMFCs Cho, Hong Je; Jang, Hyunsook; Lim, Seokhee; Cho, EunAe; Lim, Tae-Hoon; Oh, In-Hwan; Kim, Hyoung-Juhn; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.19, pp.12465 - 12473, 2011-09 |
| Direct evidence for the formation of ordered carbides in a ferrite-based low-density Fe-Mn-Al-C alloy studied by transmission electron microscopy and atom probe tomography Seol, Jae-Bok; Raabe, Dierk; Choi, Pyuck-Pa; Park, Hyung-Seok; Kwak, J. -H.; Park, Chan-Gyung, SCRIPTA MATERIALIA, v.68, no.6, pp.348 - 353, 2013-03 |
| Doubled strength and ductility via maraging effect and dynamic precipitate transformation in ultrastrong medium-entropy alloy Chung, Hyun; Choi, Won Seok; Jun, Hosun; Do, Hyeon-Seok; Lee, Byeong-Joo; Choi, Pyuck-Pa; Han, Heung Nam; et al, NATURE COMMUNICATIONS, v.14, no.1, 2023-01 |
| Dynamic deformation behavior of an oxide-dispersed tungsten heavy alloy fabricated by mechanical alloying Park, S; Kim, DK; Lee, S; Ryu, Ho Jin; Hong, Soon-Hyung, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.32, no.8, pp.2011 - 2020, 2001-08 |
| Effect of a Sintering Process on the Electrical Properties of SnO2 Gas Sensors Lee, GG; Kang, Suk-Joong L; Kwon, J; Kim, DS, JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, v.10, pp.68 - 73, 2010-01 |
| Effect of Ag Addition on the Ripening Growth of Cu6Sn5 Grains at the Interface of Sn-xAg-0.5Cu/Cu During a Reflow Cho, Moon-Gi; Park, Yong-Sung; Seo, Sun-Kyoung; Paik, Kyung-Wook; Lee, Hyuck-Mo, IEEE TRANSACTIONS ON COMPONENTS PACKAGING AND MANUFACTURING TECHNOLOGY, v.1, no.12, pp.1939 - 1946, 2011-12 |
| Effect of aspect ratios of in situ formed TiB whiskers on the mechanical properties of TiBw/Ti-6Al-4V composites Koo, Min Young; Park, Jae Sung; Park, Min Kyu; Kim, Kyung Tae; Hong, Soon-Hyung, SCRIPTA MATERIALIA, v.66, no.7, pp.487 - 490, 2012-04 |
| Effect of carbon mixing on the degree of perpendicular texture of FePt:C nanocomposite film for magnetic recording media Lee, S. H.; Park, Joong Keun, MATERIALS CHEMISTRY AND PHYSICS, v.118, no.1, pp.213 - 218, 2009-11 |
| Effect of carbon mixing on the perpendicular magnetization of [FePt/C](n) (=) (4)/FePt multilayer nanocomposite films Lee, S. H.; Park, Joong Keun, PHYSICA B-CONDENSED MATTER, v.404, no.21, pp.4321 - 4326, 2009-11 |
| Effect of Cu content on the mechanical reliability of Ni/Sn-3.5Ag system Kim, JY; Sohn, YC; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.3, pp.770 - 776, 2007-03 |
| Effect of CxNy Molecular Species on Carbon Nitride Thin Films Deposited by Radio Frequency Magnetron Sputtering Roh, Kimin; Na, Byung-Keun; Choi, Si-Kyung; Kim, Jung-Hyung; Seong, Dae-Jin; Kim, Jung-Won, JAPANESE JOURNAL OF APPLIED PHYSICS, v.47, no.11, pp.8530 - 8533, 2008-11 |
| Effect of dislocations on grain growth in strontium titanate Chung, Sung-Yoon; Kang, Suk-Joong L, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.83, no.11, pp.2828 - 2832, 2000-11 |
| Effect of grain boundary phase on contact damage resistance of silicon nitride ceramics Lee, CS; Lee, KS; Lee, SW; Kim, Do Kyung, ADVANCED SI-BASED CERAMICS AND COMPOSITES BOOK SERIES: KEY ENGINEERING MATERIALS, v.287, pp.421 - 426, 2005 |
| Effect of Interface Morphology on Kinetics of Microstructural Evolution in $BaTiO_3$ = $BaTiO_3$ 계에서 계면구조 조절에 의한 미세구조 제어link Choi, Si-Young; 최시영; et al, 한국과학기술원, 2004 |
| Effect of laser surface modification on the corrosion resistance of Alloy 600 Shin, JK; Suh, JH; Kim, JS; Kang, Suk-Joong L, SURFACE & COATINGS TECHNOLOGY, v.107, no.2-3, pp.94 - 100, 1998-09 |
| Effect of Ni layer thickness and soldering time on intermetallic compound formation at the interface between molten Sn-3.5Ag and Ni/Cu substrate Choi, WK; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.28, no.11, pp.1251 - 1255, 1999 |
| Effect of nitrogen atmosphere on the densification of a 3-mol %-yttria-doped zirconia Paek, YK; Ahn, JH; Kim, GH; Kang, Suk-Joong L, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.85, no.6, pp.1631 - 1633, 2002-06 |
| Effect of oxide dispersoids addition on mechanical properties of tungsten heavy alloy fabricated by mechanical alloying process Lee, Kyong H; Cha, Seung I; Ryu, Ho Jin; Hong, Soon-Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.452, pp.55 - 60, 2007-04 |
| Effect of silica surface dopants on the formation of alumina/aluminum composites by the directed metal oxidation of an aluminum alloy Park, HS; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.84, no.11, pp.2526 - 2530, 2001-11 |
| Effect of sintering atmosphere on grain shape and grain growth in liquid-phase-sintered silicon carbide Jang, CW; Kim, J; Kang, Suk-Joong L, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.85, no.5, pp.1281 - 1284, 2002-05 |
| Effect of sputtering pressure on stacking fault density and perpendicular magnetic anisotropy of CoPt alloys Park, Kyung-Woong; Oh, Young Wan; Kim, Dae-Hoon; Kim, Jai-Young; Park, Byong-Guk, JOURNAL OF PHYSICS D-APPLIED PHYSICS, v.49, no.34, 2016-09 |
| Effect of starting powder on damage resistance of silicon nitrides Lee, SK; Lee, KS; Lawn, BR; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.81, no.8, pp.2061 - 2070, 1998-08 |
| Effect of thin-film stress on the formation of Cr texture and on the coercivity of CoCrX/Cr magnetic thin film Kim, JH; Park, Joong Keun, JOURNAL OF VACUUM SCIENCE & TECHNOLOGY A, v.21, no.2, pp.454 - 460, 2003-03 |
| Effect of titanium nitride inclusions on the mechanical properties of direct laser deposited Inconel 718 Lim, Kwang-Hyeok; Ryou, Ken Hee; Choi, Jae Hoon; Choi, Gwanghyo; Choi, Wonseok; Lee, Jeong Hwan; Oh, Chang-Seok; et al, EXTREME MECHANICS LETTERS, v.61, 2023-06 |
| Effect of Zn on the intermetallics formation and reliability of Sn-3.5Ag solder on a Cu pad Jee, YK; Ko, YH; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.22, no.7, pp.1879 - 1887, 2007-07 |
Discover
Open Access
Date issued
- 2,034 2020 - 2024
- 6,675 2010 - 2019
- 5,357 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989