Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject MICROSTRUCTURE
Showing results 133 to 192 of 194
| Matrix pools in a partially mechanically alloyed tungsten heavy alloy for localized shear deformation Hong, Soon-Hyung; Ryu, Ho Jin; Baek, WH, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.333, no.1-2, pp.187 - 192, 2002-08 |
| Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites Van Trinh, Pham; Lee, Junho; Kang, Byungchul; Minh, Phan Ngoc; Phuong, Doan Dinh; Hong, Soon Hyung, DIAMOND AND RELATED MATERIALS, v.124, 2022-04 |
| Mechanical Properties and Thermal Stability of CrSiN/AlN Multilayer Coatings Using a Closed-Field Unbalanced Magnetron Sputtering System Kim, Sung-Min; Kim, Gwang-Seok; Lee, Sang-Yul; Lee, Jae-Wook; Lee, JeongYong; Lee, Bo-Young, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, v.54, pp.1109 - 1114, 2009-03 |
| Mechanical properties of C-SiC composite materials fabricated by the Si-Cr alloy melt-infiltration method Kim, Seyoung; Han, In Sub; Seong, Young-Hoon; Kim, Do Kyung, JOURNAL OF COMPOSITE MATERIALS, v.49, no.24, pp.3057 - 3066, 2015-10 |
| Mechanical properties of WC–10Co cemented carbides sintered from nanocrystalline spray conversion processed powders Cha, SI; Kim, BK; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.19, no.6, pp.397 - 403, 2001 |
| MICROSTRUCTURE AND ELECTRICAL-PROPERTIES OF TANTALUM OXIDE THIN-FILM PREPARED BY ELECTRON-CYCLOTRON-RESONANCE PLASMA-ENHANCED CHEMICAL-VAPOR-DEPOSITION KIM, I; AHN, SD; CHO, BW; Ahn, SungTae; Lee, JeongYong; CHUN, JS; Lee, Won-Jong, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES REVIEW PAPERS, v.33, no.12A, pp.6691 - 6698, 1994-12 |
| Morphological effect of second phase on the thermal conductivity of AlN ceramics Kim, WJ; Kim, Do Kyung; Kim, CH, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.79, no.4, pp.1066 - 1072, 1996-04 |
| New Sn-0.7Cu-based solder alloys with minor alloying additions of Pd, Cr and Ca Koo, Jahyun; Chang, Jaewon; Lee, Young Woo; Hong, Sung Jea; Kim, Keun-Soo; Lee, Hyuck Mo, JOURNAL OF ALLOYS AND COMPOUNDS, v.608, pp.126 - 132, 2014-09 |
| NO2 gas sensing properties of amorphous InGaZnO4 submicron-tubes prepared by polymeric fiber templating route Cho, Nam Gyu; Kim, Il-Doo, SENSORS AND ACTUATORS B-CHEMICAL, v.160, no.1, pp.499 - 504, 2011-12 |
| On the evolution of porosity in spray-deposited tool steels Hu, HM; Lee, Zin-Hyoung; White, DR; Lavernia, EJ, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.31, no.3, pp.723 - 733, 2000-03 |
| Oxidation behavior and ablation properties of MDF-based biomorphic SiC composites Lee, Dong Ju; Kim, Yun C.; Umer, Malik Adeel; Lim, Kwang H.; Park, Sang B.; Hong, Soon-Hyung, CERAMICS INTERNATIONAL, v.39, no.7, pp.7475 - 7481, 2013-09 |
| Particle distribution in melt-processed Y-1.5 Ba2Cu3Ox superconductors with BaCeO3 addition Yoon, Jae-Sung; No, Kwang-Soo; Kim, Young-Ha; Mahmood, A.; Jun, B. -H.; Han, Y. -H.; Sung, T. -H.; et al, PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, v.469, pp.1239 - 1243, 2009-08 |
| Phase stability of L12-based alloys in Al-Ti-Crsystems Lee J.K; Oh M.W; Oh M.H; Wee, Dang-Moon, INTERMETALLICS, v.11, no.8, pp.857 - 865, 2003-08 |
| PHASE-TRANSFORMATION FROM ALPHA'-SIALON TO BETA'-SIALON BY LIQUID INFILTRATION IN Y-SI-AL-O-N SYSTEM HAN, SM; Kang, Suk-Joong L; LEE, YT, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.12, no.6, pp.431 - 434, 1993 |
| Plasma-sprayed Al-21Ti-23Cr coating for oxidation protection of TiAl alloys Lee, JK; Oh, MH; Lee, HK; Wee, Dang-Moon, SURFACE COATINGS TECHNOLOGY, v.182, no.2-3, pp.363 - 369, 2004-04 |
| Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting Jaegle, Eric A.; Choi, Pyuck-Pa; Van Humbeeck, Jan; Raabe, Dierk, JOURNAL OF MATERIALS RESEARCH, v.29, no.17, pp.2072 - 2079, 2014-09 |
| Rare-Earth Element Substitution of Na1+XZr2SiXP3-XO12 (X=2) Solid Electrolyte: Implications for All-Solid-State Na Ion Batteries Jung, Se Woon; Wang, Ji Eun; Kim, Dong Gyu; Ma, Ho Jin; Kim, Dong Jun; Kim, Do Kyung, ACS APPLIED NANO MATERIALS, v.5, no.10, pp.13894 - 13902, 2022-07 |
| Reaction-sintered LAGP solid electrolytes with MoS2 coating for improved stability with Li metal Baek, Seung Jin; Cha, Eunho; Kim, Dong Gyu; Yun, Jong Hyuk; Kim, Do Kyung, CERAMICS INTERNATIONAL, v.48, no.23, pp.34828 - 34836, 2022-12 |
| Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells Heo, Yeon-Hyuk; Lee, Jong-Won; Lee, Seung-Bok; Lim, Tak-Hyoung; Park, Seok-Joo; Song, Rak-Hyun; Park, Chong-Ook; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.1, pp.797 - 804, 2011-01 |
| Residual stresses in spray-formed A2 tool steel h.m.hu; e.j.lavernia; z.h.lee; d.r.white, JOURNAL OF MATERIALS RESEARCH, v.14, no.12, pp.4521 - 4530, 1999-12 |
| Revitalizing Oxygen Reduction Reactivity of Composite Oxide Electrodes via Electrochemically Deposited PrOx Nanocatalysts Nam, Seongwoo; Kim, Jinwook; Kim, Hyunseung; Ahn, Sejong; Jeon, SungHyun; Choi, Yoonseok; Park, Beom‐Kyeong; et al, Advanced Materials, 2024-03 |
| Role of samarium additions on the shape memory behavior of iron based alloys Shakoor, R. A.; Khalid, F. Ahmad; Kang, Kisuk, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.6, pp.2299 - 2302, 2011-11 |
| Secondary IMC formation induced by Kirkendall voiding in Cu/Sn-3.5Ag solder joints Kim, Sung-Hwan; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.25, no.9, pp.1854 - 1858, 2010-09 |
Segmentation of experimental datasets via convolutional neural networks trained on phase field simulations Yeom, Jiwon; Stan, Tiberiu; Hong, Seungbum; Voorhees, Peter W., ACTA MATERIALIA, v.214, 2021-05 |
| Segregation Stabilizes Nanocrystalline Bulk Steel with Near Theoretical Strength Li, Yujiao; Raabe, Dierk; Herbig, Michael; Choi, Pyuck-Pa; Goto, Shoji; Kostka, Aleksander; Yarita, Hiroshi; et al, PHYSICAL REVIEW LETTERS, v.113, no.10, 2014-09 |
| Self-propagation Combustion Behavior with Varying Al/Ni Ratios in Compression-Bonded Ni-sputtered Al Foil Multilayers Kuk, Seoung Woo; Ryu, Ho Jin; Yu, Jin, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.45A, no.12, pp.5691 - 5698, 2014-11 |
| Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys Jang, Tae Jin; Choi, Won Seok; Kim, Dae Woong; Choi, Gwanghyo; Jun, Hosun; Ferrari, Alberto; Koermann, Fritz; et al, NATURE COMMUNICATIONS, v.12, no.1, pp.4703, 2021-08 |
| Sn-Ag-Cu 솔더의 응고 경로에 따른 미세 구조 연구 및 계면 IMC 성장 거동 모델링 = Study on microstructures through the solidification paths of Sn-Ag-Cu ternary system and modeling for predicting IMC layer thickness of solder jointlink 김현득; Kim, Hyun-Deuk; et al, 한국과학기술원, 2004 |
| Spark plasma sintering behavior of nanocrystalline WC-10Co cemented carbide powders Cha, SI; Hong, Soon-Hyung; Kim, BK, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.351, pp.31 - 38, 2003-06 |
| Stability of ordered L1(2) and B-2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2 Gwalani, B; Soni, V; Choudhuri, D; Lee, M; Hwang, JY; Nam, SJ; Ryu, Ho Jin; et al, SCRIPTA MATERIALIA, v.123, pp.130 - 134, 2016-10 |
| Strength enhancement and density reduction by the addition of Al in CrFeMoV based high-entropy alloy fabricated through powder metallurgy Raza, Ahmad; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS AND DESIGN, v.157, pp.97 - 104, 2018-11 |
| Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3 Gwalani, Bharat; Pohan, Rizaldy M.; Waseem, Owais Ahmed; Alam, Talukder; Hong, Soon Hyung; Ryu, Ho Jin; Banerjee, Rajarshi, SCRIPTA MATERIALIA, v.162, pp.477 - 481, 2019-03 |
| STRUCTURAL AND OPTICAL-PROPERTIES OF HYDROGENATED AMORPHOUS-SILICON CARBIDE DEPOSITED BY GLOW-DISCHARGE FROM C3H8-SIH4-H2 MIXTURE Park, JH; Kwon, Hyuk-Sang; Lee, JY, JOURNAL OF APPLIED PHYSICS, v.72, no.11, pp.5246 - 5252, 1992-12 |
| Study of the reaction mechanism between electroless Ni-P and Sn and its effect on the crystallization of Ni-P Sohn, YC; Yu, Jin; Kang, SK; Choi, WK; Shih, DY, JOURNAL OF MATERIALS RESEARCH, v.18, no.1, pp.4 - 7, 2003-01 |
| Study on morphology evolution, orientational behavior, and anisotropic phase formation of highly filled polymer-layered silicate nanocomposites Koo, CM; Kim, Sang Ouk; Chung, In Jae, MACROMOLECULES, v.36, no.8, pp.2748 - 2757, 2003-04 |
| Study on Proton Radiation Resistance of 410 Martensitic Stainless Steels under 3 MeV Proton Irradiation Lee, Jae-Woong; Surabhi, S.; Yoon, Soon-Gil; Ryu, Ho Jin; Park, Byong-Guk; Cho, Yeon-Ho; Jang, Yong-Tae; et al, JOURNAL OF MAGNETICS, v.21, no.2, pp.183 - 186, 2016-06 |
| Suppression of abnormal grain growth in WC-Co via pre-sintering treatment Yang, Dong-Yeol; Kang, Suk-Joong L, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.27, pp.90 - 94, 2009-01 |
| Surface modification effects of SiC tile on the wettability and interfacial bond strength of SiC tile/Al7075-SiCp hybrid composites Park, Jongbok; Lee, Junho; Jo, I; Cho, S; Lee, SK; Lee, SB; Ryu, Ho Jin; et al, SURFACE COATINGS TECHNOLOGY, v.307, pp.399 - 406, 2016-12 |
| Synergistic reinforcement effects of ZrB2 on the ultra-high temperature stability of Cf/SiC composite fabricated by liquid silicon infiltration Kong, Jung Hoon; Lee, Seung Yong; Il Son, Young; Kim, Do Kyung, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.43, no.8, pp.3062 - 3069, 2023-07 |
| Synthesis and characterization of semiconductor oxide nanoparticles = 반도성 산화물 나노 입자 합성 및 특성 평가link Choi, Hong-Goo; 최홍구; et al, 한국과학기술원, 2004 |
| Synthesis of aligned GaN nanorods on Si (111) by molecular beam epitaxy Kim, YH; Lee, JeongYong; Lee, SH; Oh, JE; Lee, HS, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, v.80, pp.1635 - 1639, 2005-05 |
| Synthesis of in-situ TiC-Al composite by dipping exothermic reaction process Song, IH; Kim, Do Kyung; Hahn, YD; Kim, HD, METALS AND MATERIALS INTERNATIONAL, v.10, pp.301 - 306, 2004-06 |
| Tailored Colloidal Stability and Rheological Properties of Graphene Oxide Liquid Crystals with Polymer-Induced Depletion Attractions Shim, Yul Hui; Lee, Kyung Eun; Shin, Tae Joo; Kim, Sang Ouk; Kim, So Youn, ACS NANO, v.12, no.11, pp.11399 - 11406, 2018-11 |
| The Crystal Orientation of beta-Sn Grains in Sn-Ag and Sn-Cu Solders Affected by Their Interfacial Reactions with Cu and Ni(P) Under Bump Metallurgy Seo, Sun-Kyoung; Kang, Sung K.; Cho, Moon Gi; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.12, pp.2461 - 2469, 2009-12 |
| The design of low-temperature solder alloys and the comparison of mechanical performance of solder joints on ENIG and ENEPIG interface Wang, Shaoan; Chen, Xiangyu; Luo, Keyu; Zhou, Hongzhi; Li, Rongqing; He, Peng; Paik, Kyung-Wook; et al, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.5332 - 5339, 2023-11 |
| The doped Pd on the crystal calculation and intermetallic property of low-temperature soldered ENEPIG substrates Zhang, Shuye; Wang, Shaoan; Zhang, Shang; Chen, Xiangyu; Zeng, Chen; Paik, Kyung-Wook; He, Peng, JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, v.27, pp.7094 - 7099, 2023-11 |
| The effect of a dilution agent on the dipping exothermic reaction process for fabricating a high-volume TiC-reinforced aluminum composite Song, IH; Kim, Do Kyung; Hahn, YD; Kim, HD, SCRIPTA MATERIALIA, v.48, no.4, pp.413 - 418, 2003-02 |
| The effect of Ti on the sintering and mechanical properties of refractory high-entropy alloy TixWTaVCr fabricated via spark plasma sintering for fusion plasma-facing materials Waseem, Owais Ahmed; Lee, Junho; Lee, Hyuck-Mo; Ryu, Ho Jin, MATERIALS CHEMISTRY AND PHYSICS, v.210, pp.87 - 94, 2018-05 |
| The outstanding tensile strength of Ni-rich high entropy superalloy fabricated by powder metallurgical process Kang, Byungchul; Kong, Taeyeong; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS CHEMISTRY AND PHYSICS, v.235, 2019-09 |
| The phase decomposition in non-equimolar (ZrHfVNbMoW)Cx complex concentrated carbides via carbon content regulation Zhang, Wen; Li, Kunxuan; Chen, Lei; Shi, Zhan; Huo, Sijia; Wei, Boxin; Kang, Suk-Joong L.; et al, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.44, no.3, pp.1396 - 1403, 2024-03 |
| The role and mechanism of a ZnTe buffer layer on the structural properties of the strained CdxZn1-xTe/ZnTe double quantum wells Kim, TW; Lee, DU; Lim, YS; Lee, JeongYong; Park, HL, SOLID STATE COMMUNICATIONS, v.106, no.3, pp.153 - 156, 1998-04 |
| Thermal stability of TiAlN/CrN multilayer coatings studied by atom probe tomography Choi, Pyuck-Pa; Povstugar, Ivan; Ahn, Jae-Pyeong; Kostka, Aleksander; Raabe, Dierk, ULTRAMICROSCOPY, v.111, no.6, pp.518 - 523, 2011-05 |
| Thermoelectric properties of AgPbmSbTem+2 (12 <= m <= 26) at elevated temperature Dow, H. S.; Oh, M. W.; Park, S. D.; Kim, B. S.; Min, B. K.; Lee, H. W.; Wee, Dang-Moon, JOURNAL OF APPLIED PHYSICS, v.105, no.11, 2009-06 |
| Three-dimensional Monte-Carlo simulation of grain growth in Pt-Co thin film Park, SI; Han, SS; Kim, HG; Park, Joong Keun; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.31, no.10, pp.965 - 971, 2002-10 |
| Two-layer crystallization of amorphous YMnO3 thin films on Si(100) substrates Yoo, DC; Lee, JeongYong; Kim, IS; Kim, YT, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.86, pp.149 - 151, 2003-01 |
| Ultra-high strength WNbMoTaV high-entropy alloys with fine grain structure fabricated by powder metallurgical process Kang, Byungchul; Lee, Junho; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.712, pp.616 - 624, 2018-01 |
| Ultrasensitive and Highly Selective Gas Sensors Based on Electrospun SnO2 Nanofibers Modified by Pd Loading Yang, Dae-Jin; Kamienchick, Itai; Youn, Doo Young; Rothschild, Avner; Kim, Il-Doo, ADVANCED FUNCTIONAL MATERIALS, v.20, no.24, pp.4258 - 4264, 2010-12 |
| Wear-mechanical properties of filler-added liquid silicon infiltration C/C-SiC composites Kim, Se Young; Han, In Sub; Woo, Sang Kuk; Lee, Kee Sung; Kim, Do Kyung, MATERIALS & DESIGN, v.44, pp.107 - 113, 2013-02 |
| Wettability and interfacial morphology of Sn-3.0Ag-0.5Cu solder on electroless nickel plated ZnS transparent ceramic Zhang, Shuye; Zhu, Bingxuan; Zhou, Xiang; Wang, Xingxing; Lin, Tiesong; He, Peng; Paik, Kyung-Wook, JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, v.30, no.19, pp.17972 - 17985, 2019-10 |
| Wettability and interfacial reactions of Sn-based Pb-free solders with Cu-xZn alloy under bump metallurgies Cho, Moon Gi; Seo, Sun-Kyoung; Lee, HyuckMo, JOURNAL OF ALLOYS AND COMPOUNDS, v.474, no.1-2, pp.510 - 516, 2009-04 |
Discover
Open Access
Date issued
- 2,047 2020 - 2024
- 6,673 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989