Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Subject MICROSTRUCTURE
Showing results 109 to 168 of 195
| Impact and dynamic deformation behaviour of mechanically alloyed tungsten-based composites Hong, Soon-Hyung; Ryu, HJ; Kim, EP; Baek, WH, IMPACT RESPONSE AND DYNAMIC FAILURE OF COMPOSITES AND LAMINATE MATERIALS, PTS 1 AND 2, v.141-1, pp.453 - 462, 1998 |
| Impact of heavy alcohol consumption on cortical bone mechanical properties in male rhesus macaques Shin, Mihee; Kim, Do Kyung; Jain, Manish; Martens, Penny J.; Turner, Russell T.; Iwaniec, Urszula T.; Kruzic, Jamie J.; et al, BONE, v.181, 2024-04 |
| Improved strength of a medium -Mn steel by V addition without sacrificing ductility Park, Tak Min; Jeong, Mun Sik; Jung, Chanwon; Choi, Wonseok; Choi, Pyuck-Pa; Han, Jeongho, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.802, no.20, pp.140681, 2021-01 |
| Improving toughness of medium-Mn steels after friction stir welding through grain morphology tuning Jeong, Mun Sik; Park, Tak Min; Kim, Dong-Il; Fujii, Hidetoshi; Im, Hye Ji; Choi, Pyuck-Pa; Lee, Seung-Joon; et al, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.118, pp.243 - 254, 2022-08 |
| In situ observation of fracture sequence of physical vapor deposited TiN film on (11(2)over-bar-0) sapphire Kim, YG; Kim, Do Kyung, JOURNAL OF MATERIALS RESEARCH, v.20, no.6, pp.1389 - 1395, 2005-06 |
| In-situ synthesis of TiC/Fe alloy composites with high strength and hardness by reactive sintering Lee, Junho; Lee, Dongju; Song, Myung Hoon; Rhee, Wonhyuk; Ryu, Ho Jin; Hong, Soon Hyung, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.34, no.8, pp.1397 - 1404, 2018-08 |
| Influence of DC magnetron sputtering parameters on the properties of amorphous indium zinc oxide thin film Jung, Yeon Sik; Seo, HY; Lee, DW; Jeon, DukYoung, THIN SOLID FILMS, v.445, no.1, pp.63 - 71, 2003-11 |
| Influence of microstructure and grain boundary potential barrier layer on the electrical breakdown of positive temperature coefficient BaTiO3 ceramics Kim, Ho Gi, JAPANESE JOURNAL OF APPLIED PHYSICS, v.34, no.9A, pp.4862 - 4869, 1995-09 |
| Influence of N-2 gas pressure on the chemical bonds of amorphous carbon nitride films Roh, Ki-Min; You, Shin-Jae; Choi, Si-Kyung; Kim, Jung-Hyung; Seong, Dae-Jin, JOURNAL OF PHYSICS D-APPLIED PHYSICS, v.42, no.17, pp.175405 - 175411, 2009-09 |
| INFLUENCE OF STOICHIOMETRY AND IMPURITY ON THE SINTERING BEHAVIOR OF BARIUM-TITANATE CERAMICS J.S. Choi; Kim, Ho Gi, JOURNAL OF MATERIALS SCIENCE, v.27, no.5, pp.1285 - 1290, 1992-03 |
| Influence of supersaturated carbon on the diffusion of Ni in ferrite determined by atom probe tomography Kresse, T.; Li, Y. J.; Boll, T.; Borchers, C.; Choi, Pyuck-Pa; Al-Kassab, T.; Raabe, D.; et al, SCRIPTA MATERIALIA, v.69, no.5, pp.424 - 427, 2013-09 |
| Influences of laser surface alloying with niobium (Nb) on the corrosion resistance of Zircaloy-4 Lee, S; Park, C; Lim, Y; Kwon, Hyuk-Sang, JOURNAL OF NUCLEAR MATERIALS, v.321, no.2-3, pp.177 - 183, 2003-09 |
| Interaction mediated by size differences between Y2BaCuO5 and CeO2 particles in melt-textured YBCO superconductors Kim, Young-Ha; No, Kwang-Soo; Han, Y. H.; Kim, C. -J.; Jun, B. -H.; Lee, S. Y.; Yoon, Jae-Sung; et al, CRYOGENICS, v.51, pp.247 - 252, 2011-06 |
| Interfacial reactions between CuxNiy alloy underbump metallurgy and Sn-Ag-zCu solders Han, H; Sohn, YC; Yu, Jin, JOURNAL OF ELECTRONIC MATERIALS, v.36, no.5, pp.578 - 586, 2007-05 |
| Intergranular amorphous films and dislocations-promoted grain growth in SrTiO3 Chung, Sung-Yoon; Kang, Suk-Joong L, ACTA MATERIALIA, v.51, no.8, pp.2345 - 2354, 2003 |
| Investigation of Sn Whisker Growth in Electroplated Sn and Sn-Ag as a Function of Plating Variables and Storage Conditions Chang, Jaewon; Kang, Sung K.; Lee, Jae-Ho; Kim, Keun-Soo; Lee, Hyuck Mo, JOURNAL OF ELECTRONIC MATERIALS, v.43, no.1, pp.259 - 269, 2014-01 |
| Investigation on Thermal Conductivity of Aluminum Nitride Ceramics by FT-Raman Spectroscopy Lee, Hyeon-Keun; Kim, Do Kyung, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.93, pp.2167 - 2170, 2010-08 |
| Ionic and Electronic Conductivity of Nanostructured, Samaria-Doped Ceria Souza, E. C. C.; Chueh, W. C.; Jung, W.; Muccillo, E. N. S.; Haile, SM, JOURNAL OF THE ELECTROCHEMICAL SOCIETY, v.159, no.5, pp.127 - 135, 2012-02 |
| Ionomigration of Pores and Gas Bubbles in Yttria-Stabilized Cubic Zirconia Kim, Seung-Wan; Kang, Suk-Joong L; Chen, I-Wei, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.96, no.4, pp.1090 - 1098, 2013-04 |
| Isopropanol Effects On The Phase-Formation And Texturing Of Sol-Gel Derived PMN Thin-Films Lee, JS; Kim, CJ; Yoon, DS; Choi, CG; Woo, SS; No, Kwangsoo, JAPANESE JOURNAL OF APPLIED PHYSICS PART 2-LETTERS, v.34, no.6A, pp.716 - 719, 1995-06 |
| Joining dissimilar metal of Ti and CoCrMo using directed energy deposition Sartika, Vioni Dwi; Choi, Won Seok; Choi, Gwanghyo; Han, Jaewook; Chang, Sung-Jin; Ko, Won-Seok; Grabowski, Blazej; et al, JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, v.111, no.1, pp.99 - 110, 2022-06 |
| Kinetic stabilization of a topotactically transformed texture morphology via doping in Ni-rich lithium layered oxides Jung, Chul-Ho; Jung, Chanwon; Lee, Jongwon; Oh, Juhyun; Shim, Hun; Kim, Won-Sik; Lee, Eungjae; et al, JOURNAL OF MATERIALS CHEMISTRY A, v.10, no.26, pp.13735 - 13743, 2022-07 |
| Lamellar boundary alignment of DS-processed TiAl-W alloys by a solidification procedure Jung, In-Soo; Oh, Myung-Hoon; Park, No-Jin; Kumar, K. Sharvan; Wee, Dang-Moon, METALS AND MATERIALS INTERNATIONAL, v.13, no.6, pp.455 - 462, 2007-12 |
| Large electrocaloric effect with high thermal and electric field cycling stability in solution-processed Y:HfO2 thin films Samanta, Shibnath; Anoop, Gopinathan; Seol, WooJun; Park, Seong Min; Joh, HyunJin; Choi, Je Oh; Ahn, Dante; et al, JOURNAL OF MATERIALS CHEMISTRY A, v.10, no.18, pp.9960 - 9970, 2022-05 |
| Long-term thermal stability of nanoclusters in ODS-Eurofer steel: An atom probe tomography study Zilnyk, KD; Pradeep, KG; Choi, Pyuck-Pa; Sandim, HRZ; Raabe, D, JOURNAL OF NUCLEAR MATERIALS, v.492, pp.142 - 147, 2017-08 |
| Matrix pools in a partially mechanically alloyed tungsten heavy alloy for localized shear deformation Hong, Soon-Hyung; Ryu, Ho Jin; Baek, WH, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.333, no.1-2, pp.187 - 192, 2002-08 |
| Mechanical and wear properties of SiCp/CNT/Al6061 hybrid metal matrix composites Van Trinh, Pham; Lee, Junho; Kang, Byungchul; Minh, Phan Ngoc; Phuong, Doan Dinh; Hong, Soon Hyung, DIAMOND AND RELATED MATERIALS, v.124, 2022-04 |
| Mechanical Properties and Thermal Stability of CrSiN/AlN Multilayer Coatings Using a Closed-Field Unbalanced Magnetron Sputtering System Kim, Sung-Min; Kim, Gwang-Seok; Lee, Sang-Yul; Lee, Jae-Wook; Lee, JeongYong; Lee, Bo-Young, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, v.54, pp.1109 - 1114, 2009-03 |
| Mechanical properties of C-SiC composite materials fabricated by the Si-Cr alloy melt-infiltration method Kim, Seyoung; Han, In Sub; Seong, Young-Hoon; Kim, Do Kyung, JOURNAL OF COMPOSITE MATERIALS, v.49, no.24, pp.3057 - 3066, 2015-10 |
| Mechanical properties of WC–10Co cemented carbides sintered from nanocrystalline spray conversion processed powders Cha, SI; Kim, BK; Hong, Soon-Hyung, INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, v.19, no.6, pp.397 - 403, 2001 |
| MICROSTRUCTURE AND ELECTRICAL-PROPERTIES OF TANTALUM OXIDE THIN-FILM PREPARED BY ELECTRON-CYCLOTRON-RESONANCE PLASMA-ENHANCED CHEMICAL-VAPOR-DEPOSITION KIM, I; AHN, SD; CHO, BW; Ahn, SungTae; Lee, JeongYong; CHUN, JS; Lee, Won-Jong, JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS SHORT NOTES REVIEW PAPERS, v.33, no.12A, pp.6691 - 6698, 1994-12 |
| Morphological effect of second phase on the thermal conductivity of AlN ceramics Kim, WJ; Kim, Do Kyung; Kim, CH, JOURNAL OF THE AMERICAN CERAMIC SOCIETY, v.79, no.4, pp.1066 - 1072, 1996-04 |
| New Sn-0.7Cu-based solder alloys with minor alloying additions of Pd, Cr and Ca Koo, Jahyun; Chang, Jaewon; Lee, Young Woo; Hong, Sung Jea; Kim, Keun-Soo; Lee, Hyuck Mo, JOURNAL OF ALLOYS AND COMPOUNDS, v.608, pp.126 - 132, 2014-09 |
| NO2 gas sensing properties of amorphous InGaZnO4 submicron-tubes prepared by polymeric fiber templating route Cho, Nam Gyu; Kim, Il-Doo, SENSORS AND ACTUATORS B-CHEMICAL, v.160, no.1, pp.499 - 504, 2011-12 |
| On the evolution of porosity in spray-deposited tool steels Hu, HM; Lee, Zin-Hyoung; White, DR; Lavernia, EJ, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.31, no.3, pp.723 - 733, 2000-03 |
| Oxidation behavior and ablation properties of MDF-based biomorphic SiC composites Lee, Dong Ju; Kim, Yun C.; Umer, Malik Adeel; Lim, Kwang H.; Park, Sang B.; Hong, Soon-Hyung, CERAMICS INTERNATIONAL, v.39, no.7, pp.7475 - 7481, 2013-09 |
| Particle distribution in melt-processed Y-1.5 Ba2Cu3Ox superconductors with BaCeO3 addition Yoon, Jae-Sung; No, Kwang-Soo; Kim, Young-Ha; Mahmood, A.; Jun, B. -H.; Han, Y. -H.; Sung, T. -H.; et al, PHYSICA C-SUPERCONDUCTIVITY AND ITS APPLICATIONS, v.469, pp.1239 - 1243, 2009-08 |
| Phase stability of L12-based alloys in Al-Ti-Crsystems Lee J.K; Oh M.W; Oh M.H; Wee, Dang-Moon, INTERMETALLICS, v.11, no.8, pp.857 - 865, 2003-08 |
| PHASE-TRANSFORMATION FROM ALPHA'-SIALON TO BETA'-SIALON BY LIQUID INFILTRATION IN Y-SI-AL-O-N SYSTEM HAN, SM; Kang, Suk-Joong L; LEE, YT, JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, v.12, no.6, pp.431 - 434, 1993 |
| Plasma-sprayed Al-21Ti-23Cr coating for oxidation protection of TiAl alloys Lee, JK; Oh, MH; Lee, HK; Wee, Dang-Moon, SURFACE COATINGS TECHNOLOGY, v.182, no.2-3, pp.363 - 369, 2004-04 |
| Precipitation and austenite reversion behavior of a maraging steel produced by selective laser melting Jaegle, Eric A.; Choi, Pyuck-Pa; Van Humbeeck, Jan; Raabe, Dierk, JOURNAL OF MATERIALS RESEARCH, v.29, no.17, pp.2072 - 2079, 2014-09 |
| Rare-Earth Element Substitution of Na1+XZr2SiXP3-XO12 (X=2) Solid Electrolyte: Implications for All-Solid-State Na Ion Batteries Jung, Se Woon; Wang, Ji Eun; Kim, Dong Gyu; Ma, Ho Jin; Kim, Dong Jun; Kim, Do Kyung, ACS APPLIED NANO MATERIALS, v.5, no.10, pp.13894 - 13902, 2022-07 |
| Reaction-sintered LAGP solid electrolytes with MoS2 coating for improved stability with Li metal Baek, Seung Jin; Cha, Eunho; Kim, Dong Gyu; Yun, Jong Hyuk; Kim, Do Kyung, CERAMICS INTERNATIONAL, v.48, no.23, pp.34828 - 34836, 2022-12 |
| Redox-induced performance degradation of anode-supported tubular solid oxide fuel cells Heo, Yeon-Hyuk; Lee, Jong-Won; Lee, Seung-Bok; Lim, Tak-Hyoung; Park, Seok-Joo; Song, Rak-Hyun; Park, Chong-Ook; et al, INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, v.36, no.1, pp.797 - 804, 2011-01 |
| Residual stresses in spray-formed A2 tool steel h.m.hu; e.j.lavernia; z.h.lee; d.r.white, JOURNAL OF MATERIALS RESEARCH, v.14, no.12, pp.4521 - 4530, 1999-12 |
| Revitalizing Oxygen Reduction Reactivity of Composite Oxide Electrodes via Electrochemically Deposited PrOx Nanocatalysts Nam, Seongwoo; Kim, Jinwook; Kim, Hyunseung; Ahn, Sejong; Jeon, SungHyun; Choi, Yoonseok; Park, Beom‐Kyeong; et al, Advanced Materials, 2024-03 |
| Role of samarium additions on the shape memory behavior of iron based alloys Shakoor, R. A.; Khalid, F. Ahmad; Kang, Kisuk, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.528, no.6, pp.2299 - 2302, 2011-11 |
| Secondary IMC formation induced by Kirkendall voiding in Cu/Sn-3.5Ag solder joints Kim, Sung-Hwan; Yu, Jin, JOURNAL OF MATERIALS RESEARCH, v.25, no.9, pp.1854 - 1858, 2010-09 |
Segmentation of experimental datasets via convolutional neural networks trained on phase field simulations Yeom, Jiwon; Stan, Tiberiu; Hong, Seungbum; Voorhees, Peter W., ACTA MATERIALIA, v.214, 2021-05 |
| Segregation Stabilizes Nanocrystalline Bulk Steel with Near Theoretical Strength Li, Yujiao; Raabe, Dierk; Herbig, Michael; Choi, Pyuck-Pa; Goto, Shoji; Kostka, Aleksander; Yarita, Hiroshi; et al, PHYSICAL REVIEW LETTERS, v.113, no.10, 2014-09 |
| Self-propagation Combustion Behavior with Varying Al/Ni Ratios in Compression-Bonded Ni-sputtered Al Foil Multilayers Kuk, Seoung Woo; Ryu, Ho Jin; Yu, Jin, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, v.45A, no.12, pp.5691 - 5698, 2014-11 |
| Shear band-driven precipitate dispersion for ultrastrong ductile medium-entropy alloys Jang, Tae Jin; Choi, Won Seok; Kim, Dae Woong; Choi, Gwanghyo; Jun, Hosun; Ferrari, Alberto; Koermann, Fritz; et al, NATURE COMMUNICATIONS, v.12, no.1, pp.4703, 2021-08 |
| Sn-Ag-Cu 솔더의 응고 경로에 따른 미세 구조 연구 및 계면 IMC 성장 거동 모델링 = Study on microstructures through the solidification paths of Sn-Ag-Cu ternary system and modeling for predicting IMC layer thickness of solder jointlink 김현득; Kim, Hyun-Deuk; et al, 한국과학기술원, 2004 |
| Spark plasma sintering behavior of nanocrystalline WC-10Co cemented carbide powders Cha, SI; Hong, Soon-Hyung; Kim, BK, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, v.351, pp.31 - 38, 2003-06 |
| Stability of ordered L1(2) and B-2 precipitates in face centered cubic based high entropy alloys - Al0.3CoFeCrNi and Al0.3CuFeCrNi2 Gwalani, B; Soni, V; Choudhuri, D; Lee, M; Hwang, JY; Nam, SJ; Ryu, Ho Jin; et al, SCRIPTA MATERIALIA, v.123, pp.130 - 134, 2016-10 |
| Strength enhancement and density reduction by the addition of Al in CrFeMoV based high-entropy alloy fabricated through powder metallurgy Raza, Ahmad; Ryu, Ho Jin; Hong, Soon Hyung, MATERIALS AND DESIGN, v.157, pp.97 - 104, 2018-11 |
| Strengthening of Al0.3CoCrFeMnNi-based ODS high entropy alloys with incremental changes in the concentration of Y2O3 Gwalani, Bharat; Pohan, Rizaldy M.; Waseem, Owais Ahmed; Alam, Talukder; Hong, Soon Hyung; Ryu, Ho Jin; Banerjee, Rajarshi, SCRIPTA MATERIALIA, v.162, pp.477 - 481, 2019-03 |
| STRUCTURAL AND OPTICAL-PROPERTIES OF HYDROGENATED AMORPHOUS-SILICON CARBIDE DEPOSITED BY GLOW-DISCHARGE FROM C3H8-SIH4-H2 MIXTURE Park, JH; Kwon, Hyuk-Sang; Lee, JY, JOURNAL OF APPLIED PHYSICS, v.72, no.11, pp.5246 - 5252, 1992-12 |
| Study of the reaction mechanism between electroless Ni-P and Sn and its effect on the crystallization of Ni-P Sohn, YC; Yu, Jin; Kang, SK; Choi, WK; Shih, DY, JOURNAL OF MATERIALS RESEARCH, v.18, no.1, pp.4 - 7, 2003-01 |
| Study on morphology evolution, orientational behavior, and anisotropic phase formation of highly filled polymer-layered silicate nanocomposites Koo, CM; Kim, Sang Ouk; Chung, In Jae, MACROMOLECULES, v.36, no.8, pp.2748 - 2757, 2003-04 |
Discover
Open Access
Date issued
- 2,164 2020 - 2024
- 6,675 2010 - 2019
- 5,356 2000 - 2009
- 3,582 1990 - 1999
- 982 1980 - 1989