Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Author Jeon, Duk-Young

Showing results 68 to 87 of 87

68
광모듈에 실장되는 광·전소자의 저온 및 멀티 플립칩 본딩에 관한 연구 = Low temperature and multiple flip-chip bonding of optoelectronic chips for optical moduleslink

주건모; Chu, Kun-Mo; et al, 한국과학기술원, 2007

69
구조 변형에 의한 트리페닐아민계 유기 발광 염료의 발광특성 조절 및 이를 이용한 white LED 구현에 관한 연구 = A study of the modification on emission properties of light emitting triphenylamine derivatives by structural changes and the fabrication of white LED using the light emitting dyeslink

황석환; Hwang, Seok-Hwan; et al, 한국과학기술원, 2010

70
균일침전법에 의한 단분산 구형의 $Y_2O_3:Eu^{3+}$ 형광체 합성 및 발광특성 = Synthesis of monodisperse spherical $Y_2O_3:Eu^{3+}$ phosphor by homogeneous precipitation method and its photoluminescent propertieslink

유형선; Yoo, Hyoung-Sun; et al, 한국과학기술원, 2006

71
레이저 디스플레이용 광스캐너의 설계 및 제작에 관한 연구 = A study on the design and fabrication of silicon optical scanner for laser displaylink

이진호; Lee, Jin-Ho; et al, 한국과학기술원, 2003

72
마이크론 구조물의 도입으로 인한 박막형광체의 발광특성 개선에 관한 연구 = Improvement of luminescent properties of inorganic thin film phosphor via introduction of micron-size structures in phosphor layerlink

한지연; Han, Ji-Yeon; et al, 한국과학기술원, 2008

73
새로운 CNT 페이스트 조성물을 이용한 전계 방출 특성의 향상 및 전계 방출 구동 중 CNT tips의 degradation 현상 규명 = Field emission enhancement by new CNT paste components and characterization of degradation in CNT tips during field emissionlink

이소라; Lee, So-Ra; et al, 한국과학기술원, 2006

74
연소합성법에 의한 $SnO_2:Eu^{3+}$ 형광체의 제조 및 음극선 발광특성 = Synthesis and its cathodoluminescence properties of $SnO_2:Eu^{3+}$ phosphor by combustion methodlink

강종혁; Kang, Jong-Hyuk; et al, 한국과학기술원, 2003

75
인듐 범프를 이용한 VCSEL 어레이의 플립칩 본딩 최적화 = Optimization of flip chip bonding for a VCSEL array using indium bumpslink

주건모; Chu, Kun-Mo; et al, 한국과학기술원, 2003

76
일체형 $Ni_{48}Cr_{40}Fe_{12}$ Thin film strain gage 제작과 sidewall 이 strain gage 특성에 미치는 영향에 관한 연구 = A study on the fabrication of one-patch $Ni_{48}Cr_{40}Fe_{12}$ thin film strain gage and the effects of the sidewall on the strain gage performanceslink

정유철; Jung, Yoo-Chul; et al, 한국과학기술원, 2001

77
자벽이동 및 수직 자기터널접합용 수직자기 이방성 물질 개발 = Development of perpendicular magnetic anisotropy materials for domain wall motion and perpendicular magnetic tunnel junctionlink

김선옥; Kim, Seon-Ock; et al, 한국과학기술원, 2011

78
저전압용 형광체 $ZaGa_2O_4$의 발광 증대에 관한 연구 = A study on the improvement of brightness of $ZnGa_2O_4$ phosphor for low voltage cathodoluminescencelink

김태종; Kim, Tae-Jong; et al, 한국과학기술원, 1999

79
적색 무기전계발광 형광체의 개발 및 백색 분산형 무기 전계발광 소자의 특성 향상 = Electroluminescence enhancement of white ACPEL device by the development of red emitting EL phosphor and the modification of device structurelink

박봉제; Park, Bong-Je; et al, 한국과학기술원, 2010

80
전착된 ZnS:Ag,Cl 형광체의 열처리 조건에 따른 접착력과 발광에 관한 연구 = A study on the adhesion and brightness of electrophoretically deposited ZnS:Ag,Cl phosphor by heat treatment conditionlink

김훈; Kim, Hoon; et al, 한국과학기술원, 1999

81
주석-다중벽 탄소나노튜브 나노복합재료의 열전도 특성과 Eu 이온 첨가에 따른 음극선 발광 특성 = Thermal conducting property and eu ion assisted cathodoluminescence of Sn-multiwalled carbon nanotube nanocompositeslink

이정섭; Lee, Jung-Sub; et al, 한국과학기술원, 2008

82
청색 형광체 $BaMgAl_{10}O_{17}:Eu^2+$ 의 PDP 제조 공정 중 일어나는 열화현상 = Thermal degradation of blue emitting $BaMgAl_{10}O_{17}:Eu^2+$ phosphors during the PDP panel manufacturing processlink

이은희; Lee, Eun-Hee; et al, 한국과학기술원, 2002

83
탄소나노튜브 페이스트를 이용한 field emitter의 제작 및 구동 중 발생하는 탄소나노튜브의 구조적 변화에 대한 특성 고찰 = Characterization of preparation- and operation-induced structural defects of field emitter based on CNT pastelink

이연주; Lee, Yeon-Ju; et al, 한국과학기술원, 2007

84
펄스 레디저 조사에 의한 비정질 실리콘 박막의 재결정화에 관한 연구 = A study on the recrystallization of amorphous silicon thin film by the pulsed-laser irradiationlink

맹성렬; Maeng, Sung-Lyul; et al, 한국과학기술원, 1995

85
표면 정전기장에 의한 ZnS:Mn EL 형광체의 발광 효율 증대 및 Mg 첨가로 인한 색좌표 특성 개선 = Improvement of iuminescence property of ZnS:Mn EL phosphor produced by surface electrostatic field and the enhancement of its color coordinates by adding Mglink

이동진; Lee, Dong-Chin; et al, 한국과학기술원, 2005

86
플라즈마 CVD 방법으로 저온 성장한 다중벽 탄소 나노튜브의 형태와 특성 = Shape and characteristics of multi walled carbon nanotube grown at low temperature uisng plasma CVD methodslink

우윤성; Woo, Yun-Sung; et al, 한국과학기술원, 2003

87
형광체 페이스트용 저온소성형 바인더 P(MMA-co-BMA)의 합성과 열분해시 잔류 탄소침적물 형성 기구 및 제어에 관한 연구 = Synthesis of low temperature burnable P(MMA-co-BMA) binder and control of carbon residue formation during binder thermolysislink

김성욱; Kim, Soung-Wook; et al, 한국과학기술원, 2007

rss_1.0 rss_2.0 atom_1.0