Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1901 to 1920 of 2170

1901
이온 질화처리가 SCM 21 강과 SCM 4강의 충격강도에 미치는 영향에 관한 연구 = Effect of ionitriding on impact strength in Cr-Mo steellink

이종권; Lee, Jong-Kwon; et al, 한국과학기술원, 1979

1902
이온처리된 리드프레임과 EMC와의 접착특성 연구 = A study on adhesion characteristics between Ion-treated leadframe and epoxy molding compoundlink

한훈; Han, Hun; et al, 한국과학기술원, 1997

1903
이중 페롭스카이트 구조를 가지는 $Sr_2FeMoO_6$의 초거대자기저항거동에 관한 연구 = A study on colossal magnetoresistance in double-ordered perovskite $Sr_2FeMoO_6$link

장원위; Jang, Weon-Wi; et al, 한국과학기술원, 2000

1904
이차원-삼차원 화합물 반도체의 이종 접합 형성 및 광전소자 연구 = Heterojunction formation of two dimensional-three dimensional compound semiconductor and application for optoelectronic devicelink

김수현; 강기범; et al, 한국과학기술원, 2021

1905
이차전지용 흑연화 탄소분말의 투과전자현미경 연구 = A transmission electron microscopy study on the graphitized carboneous powders for rechargeable batterieslink

허윤; Huh, Yoon; et al, 한국과학기술원, 2000

1906
인가 전위와 황산 수용액의 pH가 Al-1wt.% Si-0.5wt.% Cu 합금 위에 형성된 다공질 양극 산화 피막의 Barrier Layer의 용해에 미치는 영향 = Effects of applied potential and pH on the dissolution of barrier layer of porous anodic oxide film on Al-1wt.% Si-0.5wt.% Cu alloy in aqueous $H_2SO_4$ solutionlink

김영수; Kim, Young-Soo; et al, 한국과학기술원, 1995

1907
인공광합성 응용을 위한 양자점과 $-Ⅲ-Ⅵ_2$ Chalcopyrite 나노 입자의 합성 및 특성 평가 = Synthesis and characterization of quantum dots and $-Ⅲ-Ⅵ_2$ chalcopyrite nanoparticles for their application to artificial photosynthesislink

남동헌; Nam, Dong-Heon; et al, 한국과학기술원, 2010

1908
인듐 범프를 이용한 VCSEL 어레이의 플립칩 본딩 최적화 = Optimization of flip chip bonding for a VCSEL array using indium bumpslink

주건모; Chu, Kun-Mo; et al, 한국과학기술원, 2003

1909
인산 용액내에서 Carbon black 의 부식에서의 표면 산화물의 역할에 대한 연구 = Role of surface oxide in corrosion of carbon black in phosphoric acid solutionlink

김태영; Kim, Tae-Young; et al, 한국과학기술원, 1991

1910
인산용액내에서 백금 촉매처리된 탄소전극의 부식특성에 관한 연구 = Corrosion behaviour of platinum catalyzed carbon electrode in phosphoric acid solutionlink

류영균; Ryu, Young-Gyoon; et al, 한국과학기술원, 1993

1911
인산용액내에서 탄소전극의 양극거동에 미치는 산소의 영향 = Effects of gaseous oxygen an anodic behaviour of carbon electrode in phosphoric acid solutionlink

이서재; Lee, Seo-Jae; et al, 한국과학기술원, 1992

1912
인의 입계편석이 연강의 입계부식과 응력부식 균열의 생성및 전파에 미치는 영향에 관한 연구 = Effects of phosphorus segregated at grain boundary on the intergranular corrosion and the stress corrosion crack initiation and propagation of mild steellink

이성민; Lee, Seong-Min; et al, 한국과학기술원, 1986

1913
인장속도의 변화를 통한 강의수소취성기구에 관한 연구 = Investigation of the hydrogen embrittlement mechanism by means of variation of the strain ratelink

김윤기; Kim, Yoon-Gi; et al, 한국과학기술원, 1976

1914
일방향 응고된 $Ni_3Al$(γ')-$Ni_3Nb$ (δ) 공정조성합금에 관한 연구 = An investigation of the unidirectionally solidified $Ni_3Al$(γ')-$Ni_3Nb$ (δ) eutectic alloylink

김용석; Kim, Yong-Suck; et al, 한국과학기술원, 1980

1915
일방향 응고한 Al-6.6Si-0.6Mg 합금의 현미경 조직 및 기계적 성질 = Structures and mechanical properties of unidirectionally solidified Al-6.6Si-0.6Mg alloylink

박순천; Park, Soon-Chun; et al, 한국과학기술원, 1975

1916
일방향응고 TiAl 합금의 조성, 성장속도 및 β안정화원소 첨가가 층상경계방위분포에 미치는 효과 = Effects of composition, growth rate and β stabilizer on the lamellar orientation distribution of directionally-solidified TiAl alloyslink

정인수; Jung, In-Soo; et al, 한국과학기술원, 1998

1917
일정 변형율 속도법에 의한 공업용 Al-Zn-Mg-Cu 합금 (AA 7075) 의 미세조직과 응력 부식 거동과의 관계에 관한 연구 = Microstructural dependence on the stress-corrosion behaviour of commercial Al-Zn-Mg-Cu alloy (AA 7075) by constant strain-rate test methodlink

서태석; Suh, Tae-Suk; et al, 한국과학기술원, 1985

1918
일정 연신율법에 의한 고순도 Al-Zn-Mg 합금의 응력 부식 파괴의 속도론에 관한 연구 = A contribution to the kinetics of stress corrosion cracking in a high purity Al-Zn-Mg alloy by constant strain rate test methodlink

김홍표; Kim, Hong-Pyo; et al, 한국과학기술원, 1984

1919
일정 하중법에 의한 공업용 Al-Zn-Mg-Cu 합금 (AA 7075) 의 응력 부식 거동에 관한 연구 = An investigation to stress corrosion cracking behaviour of technical Al-Zn-Mg-Cu alloy (AA 7075) by constant load methodlink

정한수; Jung, Han-Soo; et al, 한국과학기술원, 1984

1920
일정한 Peak load 와 peak stress 에 따른 creep 변형의 차이에 관한 연구 = Dependence of creep deformation on constant peak load and peak stresslink

최대순; Choi, Dae-Soon; et al, 한국과학기술원, 1983

rss_1.0 rss_2.0 atom_1.0