Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1901 to 1920 of 2223

1901
열기상증착법으로 합성한 ZnS 나노선의 구조적 특성 분석 = A study on microstructural characterization of ZnS nanowires synthesized by thermal vapor evaporation methodlink

선창우; Sun, Chang-Woo; et al, 한국과학기술원, 2005

1902
열분해 카본에 함유된 Soot particle 의 형성과 기계적 성질에 미치는 영향 = A study on the formation of soot particles included in pyrolytic carbon and its effects on mechanical propertieslink

오세민; Oh, Se-Min; et al, 한국과학기술원, 1985

1903
열산화된 리드프레임과 EMC와의 접착력에 관한 연구 = A study on the adhesion between thermally oxidized leadframe and epoxy molding compoundslink

신승우; Shin, Seung-Woo; et al, 한국과학기술원, 1997

1904
열산화에 의한 InN 나노선의 $In_2O_3$ 껍질층 생성과 미세구조 특성 연구 = Formation and microstructural properties of $In_2O_3$ sheath layer on InN nanowires by thermal oxidationlink

안흥배; Ahn, Hung-Bae; et al, 한국과학기술원, 2010

1905
열증발법을 이용한 $Sb_2Te_3$ 나노와이어의 제조 및 분석 = Fabrication of $Sb_2Te_3$ Nanowires via Thermal Evaporation Method and their Characterizationlink

이준석; Lee, Joon-Suk; et al, 한국과학기술원, 2009

1906
열처리 조건이 ECR plasma 화학 증착법으로 증착된 tantalum oxide 박막의 물성에 미치는 영향 = The effects of annealing conditions on the properties of tantalum oxide thin films deposited by electron cyclotron resonance plasma enhanced chemical vapor depositionlink

권오승; Kwon, Oh-Seung; et al, 한국과학기술원, 1993

1907
열처리 조건이 기계적 합금화한 ODS Ni기 초내열합금의 2차 재결정 거동에 미치는 영향 = The influence of heat treatment condition on the secondary recrystallization behavior in mechanically alloyed ODS Ni-base superalloylink

박이주; Park, Lee-Ju; et al, 한국과학기술원, 1992

1908
열처리가 Cu-ferrite 와 CuZn-ferrite curie temperature 에 미치는 영향 = The effect of heat treatment on the curie temperature of copper ferrite and copper zinc ferritelink

권오종; Kwon, O-Jong; et al, 한국과학기술원, 1975

1909
열처리와 흡수층 위에 증착된 In이 $CBD-In_2S_3$ 버퍼층을 적용한 CIGS 태양전지에 미치는 영향에 관한 연구 = Annealing and Indium interlayer effects on the $CBD-In_2S_3$/CIGS solar cellslink

김희섭; Kim, Hee-Seop; et al, 한국과학기술원, 2011

1910
열처리와 흡수층 위에 증착된 In이 $CBD-In_2S_3$ 버퍼층을 적용한 CIGS 태양전지에 미치는 영향에 관한 연구 = Annealing and Indium interlayer effects on the $CBD-In_2S_3$/CIGS solar cellslink

김희섭; Kim, Hee-Seop; et al, 한국과학기술원, 2011

1911
염료감응 태양전지용 솔-젤 불화 올리고실록산 젤 전해질 = Sol-Gel Fluoro Oligosiloxane Gel Electrolyte for Dye Sensitized Solar Cell (DSSC)link

배준영; Jun-Young Bae; et al, 한국과학기술원, 2011

1912
오스테나이트 스테인리스강의 부동태 피막의 반도체적 특성에 미치는 합금 원소(Ni, Mo)의 영향 = Effects of alloying elements (Ni, Mo) on the semiconducting properties of passive films formed on austenitic stainless steelslink

장희진; Jang, Hee-Jin; et al, 한국과학기술원, 2003

1913
오스테나이트 주강에서 δ-Ferrite 가 저온 기계적 성질에 미치는 영향 = The effects of δ-ferrite on the low temperature mechanical properties in CF-3M cast stainless steelslink

박반욱; Park, Ban-Uk; et al, 한국과학기술원, 1988

1914
오스테나이트계 Fe-25Mn-Al-C 합금에서 Al과 C가 기계적 성질 및 진동감쇠 특성에 미치는 영향 = Effects of Al and C on mechanical properties and damping characteristic of austenitic Fe-25Mn-Al-C alloyslink

허환; Heo, Hwan; et al, 한국과학기술원, 1994

1915
오스테나이트계 스테인리스강의 열역학적 평형 및 확산응고경로에 관한 고찰 = Thermodynamic equilibrium and diffusional solidification path in austenitic stainless steellink

배준수; Bae, Jun-Soo; et al, 한국과학기술원, 1998

1916
오오스테나이트 Fe-Mn-Al-C 합금의 상변화 및 기계적 성질에 관한 연구 = Phase changes and mechanical properties of austenitic Fe-Mn-Al-C alloyslink

김도진; Kim, Do-Jin; et al, 한국과학기술원, 1981

1917
온도에 따른 AISI304L stainless steel의 저주파 피로 거동에 관한 연구 = The effect of temperature on the low cycle fatigue behavior in AISI 304L stainless steellink

이제민; Lee, Je-Min; 남수우; 천성순; et al, 한국과학기술원, 1987

1918
왕겨로 부터 Si3N4형성에 관한 속도론적 연구 = The kinetics of silicon nitride formation from korean rice hullslink

강상원; Kang, Sang-Won; et al, 한국과학기술원, 1978

1919
왕겨로부터 SiC의 제조 = Formation of silicon carbide from rice hullslink

이재선; Lee, Jai-Son; et al, 한국과학기술원, 1975

1920
왕복노즐을 이용한 분무적층공정에 대한 연구 = A study on the spray deposition process with reciprocating nozzlelink

문병철; Moon, Byeong-Cheol; et al, 한국과학기술원, 1994

rss_1.0 rss_2.0 atom_1.0