Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1881 to 1900 of 2223

1881
액상소결에서 입자변형과 기공소멸에 관한 이론적 연구 = Principles of shape accommodation and pore elimination in liquid phase sinteringlink

박효훈; Park, Hyo-Hoon; et al, 한국과학기술원, 1982

1882
액상소결한 Fe-Cu 합금의 massive 변태 = Massive transformation in Fe-Cu alloy prepared by liquid phase sinteringlink

황농문; Hwang, Nong-Moon; et al, 한국과학기술원, 1983

1883
액상에피탁시(LPE)방법으로 성장된 격자정합 GaInAsP/InP 이종구조에서 Zn 확산시 정합 $Zn_3P_2$ 석출에 관한 연구 = A study on the coherent precipitation of $Zn_3P_2$ during Zn diffusion in a lattice matched GaInAsP/InP heterostructure grown by liquid phase epitaxylink

홍순구; Hong, Soon-Ku; et al, 한국과학기술원, 1992

1884
액상이 게재된 $BaTiO_3$ 의 분위기에 따른 입자성장 양상 = Grain growth behavior of $BaTiO_3$ in $SiO_2$ -rich liquid matrixlink

장재명; Chang, Jae-Myung; et al, 한국과학기술원, 2005

1885
양극 산화 공정을 이용한 양 끝이 열린 $TiO_2$ 나노튜브 배열의 제조와 광촉매 응용에 대한 연구 = Fabrication of open both ended $TiO_2$ nanotube arrays by anodization and their photocatalytic applicationlink

김재규; Kim, Jaegyu; et al, 한국과학기술원, 2016

1886
양극 산화로 배열된 TiO₂나노튜브와 PbO 증기상 반응을 이용한 PbTiO₃나노튜브의 합성과 특성 분석 = Fabrication and characterization of ferroelectric pbtio3 nanotube arrays fabricated using reaction of anodized TiO2 nanotubes and PbO Vaporlink

김봉수; kim, Bong-Soo; et al, 한국과학기술원, 2012

1887
양자점 통합 풀컬러 디스플레이 구현을 위한 레이저 박리 기술을 활용한 유연 마이크로 발광다이오드의 제작 = Fabrication of flexible micro LED via laser lift-off technique for quantum dot-incorporated full color displaylink

이승형; 이건재; et al, 한국과학기술원, 2019

1888
에멀젼법에 의한 구형 알루미나 분말과 이트륨-알루미네이트 분말의 제조 = Preparation of spherical alumina and yttrium-aluminate powders by emulsion methodlink

박건식; Park, Kun-Sik; et al, 한국과학기술원, 1996

1889
에멀젼법을 이용한 세라믹 분말 제조에 관한 분석적 고찰 = Analytical study on the preparation of ceramic powders by emulsion methodlink

전영인; Jhon, Young-In; et al, 한국과학기술원, 1998

1890
$에폭시/BaTiO_3$ 복합 내장형 커패시터 필름의 경화 거동과 커패시턴스의 온도의존성에 관한 연구 = A study of curing behavior and temperature dependence of capacitance on $epoxy/BaTiO_3$ composite embedded capacitor films (ECFs)link

현진걸; Hyun, Jin-Gul; et al, 한국과학기술원, 2004

1891
에피텍셜 $CoSi_2$층의 (100)Si 기판에서의 성장속도론 및 산화속도론 = Growth kinetics and oxidation kinetics of epitaxial $CoSi_2$ layer on (100)Si substratelink

김성철; Kim, Sung-Chul; et al, 한국과학기술원, 2000

1892
연강에서 연삭 마모 성질에 미치는 수소의 영향 = The effect of hydrogen on the abrasive wear properties of low carbon steellink

김창하; Kim, Chang-Ha; 강석중; 변수일; et al, 한국과학기술원, 1988

1893
연료전지(PEMFC) 금속재분리판용 Cu/Cr 합금의 내부식성 향상을 위한 Cr-nitride 형성 = Formation of Cr-nitride for the improvement of corrosion resistance in Cu-Cr alloy as metallic separators in fuel cells(PEMFC)link

이혜연; Lee, Hye-Youn; et al, 한국과학기술원, 2007

1894
연성 기판-유기 경성 기판간의 상온 초음파 ACF 접합 공정에 관한 연구 = Ultrasonic anisotropic conductive films (ACFs) bonding of flexible substrates on organic rigid boards at room temperaturelink

이기원; Lee, Ki-Won; et al, 한국과학기술원, 2007

1895
연소합성법에 의한 $SnO_2:Eu^{3+}$ 형광체의 제조 및 음극선 발광특성 = Synthesis and its cathodoluminescence properties of $SnO_2:Eu^{3+}$ phosphor by combustion methodlink

강종혁; Kang, Jong-Hyuk; et al, 한국과학기술원, 2003

1896
연소합성법을 이용한 $γ-LiAlO_2$의 제조 = Synthesis of $γ-LiAlO_2$ by combustion methodlink

김덕수; Kim, Duk-Su; et al, 한국과학기술원, 1998

1897
연소합성에 의한 초미립 $TiB_2$ 입자의 합성에 관한 연구 = Combustion synthesis of fine $TiB_2$ particleslink

이종무; Lee, Jong-Moo; et al, 한국과학기술원, 2001

1898
열 분해 카본의 제작방법 개발과 특성에 대한 연구 : 농도와 Bed 면적의 효과 = Study on the process development and the characteristics of pyrolytic carbon : effects of concentration and bed arealink

제정호; Jei, Jung-Ho; et al, 한국과학기술원, 1981

1899
열 필라멘트법으로 제조한 다이아몬드 박막의 미세구조 제어 및 표면연마에 관한 연구 = A study on the microstructure controll and surface ppolishing of diamond film deposited b y hot-filament CVDlink

정상기; Jeong, Sang-Ki; et al, 한국과학기술원, 1994

1900
열 필라멘트법으로 제조한 다이아몬드 박막의 잔류응력 = Residual stress of diamond film deposited by hot-filament CVDlink

정대영; Jung, Dae-Young; et al, 한국과학기술원, 1995

rss_1.0 rss_2.0 atom_1.0