Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1501 to 1520 of 2223

1501
고 망간 오스테나이트계 Fe-Mn 합금에서 열처리와 망간함량이 입계편석 및 기계적 성질에 미치는 영향 = The effects of heat treatments and Mn contents on grain boundary segregation and mechanical properties in high manganese austenitic Fe-Mn alloyslink

한충수; Han, Chung-Soo; et al, 한국과학기술원, 1990

1502
고 망간(Mn) 내열강의 크??파단 성질에 미치는 이단열처리와 인(P) 첨가의 영향 = Effect of two step heat treatment and phosphorus additiion on the creep rupture properties of the high manganese heat resisting alloylink

류재석; Ryu, Jae-Seok; et al, 한국과학기술원, 1979

1503
고 순도 알루미늄의 피로와 Creep 변형에 따른 slip band 형성에 관한 연구 = A study on the formation of slip band in 99.999% aluminum under static and repeated tensile loadlink

최승주; Choe, Seung-Joo; et al, 한국과학기술원, 1978

1504
고 코발트-니켈 이차 경화강에서의 $M_2C$ 석출물의 성장 거동 = Growth behavior of $M_2C$ precipitates in the high Co-Ni secondary hardening steellink

유충화; Yoo, Choong-Hwa; et al, 한국과학기술원, 1995

1505
고강도 알루미늄 합금의 주조특성에 미치는 입자 미세화의 영향 = The effect of grain refinement on the casting properties of high strength aluminum alloylink

권영동; Kwon, Young-Dong; et al, 한국과학기술원, 2001

1506
고강도-고전도성 Cu-Ni-Si-X 계 합금에서의 석출거동에 대한 연구 = The investigation of precipitation behavior in high strength-high conductivity Cu-Ni-Si-X alloyslink

박봉림; Park, Bong-Lim; et al, 한국과학기술원, 1991

1507
고망간 고질소 스테인리스강의 부동태에 미치는 N 및 Ni의 영향 = Effects of N and Ni on the passivity of High Mn-N stainless steelslink

오꽃님; Oh, Kkoch-Nim; et al, 한국과학기술원, 2008

1508
고분자전해질 연료전지 금속분리판용 446M 스테인리스강의 내식성과 전기전도성에 미치는 탄화처리 효과 = Effects of thermal carburization on the corrosion resistance and electrical conductivity of 446M stainless steel for PEMFC bipolar plateslink

이성우; Lee, Sung-Woo; et al, 한국과학기술원, 2010

1509
고분자전해질 연료전지 금속재분리판용 446M 스테인리스강의 내식성 및 전도성에 미치는 질화처리 효과 = Effects of thermal nitridation on the corrosion resistance and electrical conductivity of 446M stainless steel for PEMFC bipolar plateslink

이기형; Lee, Ki-hyoung; et al, 한국과학기술원, 2008

1510
고상반응법에 의한 리튬 2차 전지용 양극재료 $LiFePO_4$ 의 합성과 최적화에 관한 연구 = Synthesis and optimization of $LiFePO_4$ by solid state reaction for lithium secondary battery cathode materiallink

김구연; Kim, Gu-Yeon; et al, 한국과학기술원, 2004

1511
고순도 Al-Zn-Mg 합금의 석출 현상과 RRA 처리 효과에 대한 Cu 첨가의 영향 = Effects of copper on the precipitation and retrogression and reaging (RRA) treatments of high purity Al-Zn-Mg alloylink

김병훈; Kim, Byung-Hoon; et al, 한국과학기술원, 1987

1512
고순도 Al-Zn-Mg-Cu 합금의 석출현상과 퇴화 및 재시효 처리 효과에 대한 Li첨가의 영향 = The effect of lithium on the precipitation and retrogression and reaging(RRA) treatment of high purity Al-Zn-Mg-Cu alloylink

서인식; Seo, In-Sig; 이재영; 박중근; et al, 한국과학기술원, 1990

1513
고순도 Al-Zn-Mg-Cu계 합금의 퇴화 및 재 시효거동에 미치는 Zn의 영향 = The effect of zinc on the retrogression and reaging behavior of high purity Al-Zn-Mg-Culink

이성권; Lee, Sung-Gwon; et al, 한국과학기술원, 1989

1514
고순도 실리콘 성형체의 질화반응결합 = The nitridation of high purity silicon powder compactslink

최덕균; Choi, Duck-Kyun; et al, 한국과학기술원, 1980

1515
고에너지 탄소 이온 주입에 의한 Proximity gettering에 관한 투과전자현미경 연구 = A transmission electron microscopy study on the proximity gettering with high energy carbon ion implantationlink

장기완; Jang, Ki-Wan; et al, 한국과학기술원, 1996

1516
고열전도성 질화 알루미늄 세라믹의 저온 소결 및 특성평가에 관한 연구 = Low temperature sintered aln ceramics and characterization of electrical and thermal conductivitylink

이지석; Lee, Ji-seoc; et al, 한국과학기술원, 2011

1517
고온 가공열처리가 Vanadium modified AISI 4330 강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of vanadium modified AISI 4330 steellink

이재성; Lee, Jai-Sung; et al, 한국과학기술원, 1979

1518
고온 및 응력하에서 Ni-base Superalloy Rene80 의 미세 조직 변화 = The microstructural changes of Ni-base Superalloy rené80 under high temperature and stresslink

박용조; Park, Yong-Jo; et al, 한국과학기술원, 1985

1519
고온 용체화 처리한 AISI 4340 강의 주기열처리 = Thermal cycling of high temperature austenitized AISI 4340 steellink

김홍수; Kim, Hong-Soo; et al, 한국과학기술원, 1981

1520
고온가공 열처리가 AISI $300^M$ 강의 기계적 성질에 미치는 효과 = The effect of high temperature thermomechanical treatment on the mechanical properties of AISI $300^M$ steellink

정종훈; Jeong, Jong-Hoon; et al, 한국과학기술원, 1981

rss_1.0 rss_2.0 atom_1.0