Browse "Dept. of Materials Science and Engineering(신소재공학과)" by Type Thesis(Master)

Showing results 1081 to 1100 of 2223

1081
Preferred orientations and microstructures of chromium electrodeposits = 크롬電着層의 優先配向과 顯微鏡組織link

Park, Jeong-Real; 박정렬; et al, 한국과학기술원, 1976

1082
Preparation of MgO coated $TiO_2$ nanotubes and their application to dye-sensitized solar cells = MgO 코팅된 $TiO_2$ 나노튜브의 제작과 염료감응태양전지로의 응용link

Park, Hun; 박훈; et al, 한국과학기술원, 2007

1083
Preparation of quasi-ordered hollow $SnO_2$ hemispheres using colloidal templating route and its application to gas sensors = 콜로이달 템플레이팅 기술을 이용한 준정렬된 공동반구 구조의 $SnO_2$ 제작 및 가스센서로의 응용link

Chang, Young-Eun; 장영은; et al, 한국과학기술원, 2009

1084
Pressure cycling시 $MmNi_{4.15} Fe_{0.85}$ 합금의 수소화 반응 특성에 미치는 산소의 영향 = A study on the effects of oxygen on the hydrogenation properties of $MmNi_{4.15} Fe_{0.85}$ alloy upon pressure cyclinglink

김용규; Kim, Yong-Gyoo; et al, 한국과학기술원, 1988

1085
Pt-Fe oxygen reduction reaction catalysts with enhanced durability = 백금·철 산소환원반응 촉매의 내구성 향상에 관한 연구link

Jung, Chanwon; Lee, Hyuck Mo; et al, 한국과학기술원, 2017

1086
PTCR 재료의 전기적 성질에 미치는 냉각속도 효과에 관한 임피던스 분석 = Impedance analyses of cooling rate effects on the electrical properties of the PTCR materialslink

김창정; Kim, Chang-Jung; 노광수; 김호기; et al, 한국과학기술원, 1992

1087
Pulsed Laser Deposition법으로 증착한 Indium이 도핑 된 $Ge_2Sb_2Te_5$ 박막의 특성평가 = Characterization of indium doped $Ge_2Sb_2Te_5$ thin films by pulsed laser depositionlink

김경선; Kim, Kyoung-Sun; et al, 한국과학기술원, 2006

1088
Pulsed RTA를 이용한 비정질 Si 박막의 결정화 연구 = Crystallization of amorphous Si thin film using pulsed RTAlink

강승모; Kang, Seung-Mo; et al, 한국과학기술원, 2007

1089
Pyr C. 의 공정개발과 특성에 대한 연구 : 온도와 회전 속도의 영향 = Study on the process development and the characteristics of pyrolytic carbon : effect of temprature. RPMlink

류우석; Ryu, Woo-Seog; et al, 한국과학기술원, 1981

1090
PZT 분말 강화 고분자 복합재료의 음향특성에 대한 연구 = A study on the acoustic properties of PZT/Polymer compositelink

이기석; Lee, Ki-Suk; et al, 한국과학기술원, 2000

1091
PZT-PZN 계에서의 초전 및 상전이 특성 = Pyroelectric and phase transition properties in the PZT-PZN systemlink

이기홍; Lee, Ki-Hong; et al, 한국과학기술원, 1994

1092
PZT/epoxy 0-3형 압전복합재료에서 PZT 입자의 부피분율 및 입자크기가 그 물성에 미치는 영향 = Effect of volume fraction and particle size of PZT on the properties of PZT/epoxy 0-3 compositeslink

이석규; Lee, Seok-Kiu; et al, 한국과학기술원, 1988

1093
PZT/MgO/Si 박막의 제조와 특성평가 = A study on the fabrication and characterization of PZT/MgO/Si filmlink

송한욱; Song, Han-Wook; et al, 한국과학기술원, 1998

1094
PZT박막의 건조온도에 따른 전광계수의 측정 및 분석 = Measurement and analysis of the electro-optic coefficient with drying temperature in PZT thin filmslink

이창호; Lee, Chang-Ho; et al, 한국과학기술원, 1998

1095
PZT+$LaMnO_3$ System 에서 SrO 첨가에 따른 유전 및 압전특성에 대한 연구 = The dielectric and piezoelectric properties of pb (Zr,Ti)$O_3$-$LaMnO_3$ doped with SrOlink

김철세; Kim, Chul-Se; et al, 한국과학기술원, 1982

1096
Quantitative analysis of the lithium transport through the $Li_{1-δ}CoO_2$ film electrode prepared by RF magnetron sputtering = RF 마그네트론 스퍼터링법으로 제조된 $Li_{1-δ}CoO_2$ 박막 전극을 통한 리튬 이동의 정량적 해석link

Go, Joo-Young; 고주영; et al, 한국과학기술원, 2001

1097
R.F. 마그네트론 스퍼터링법으로 증착한 ITO박막에 작업 압력이 전기적 특성에 미치는 영향 = Effect of the working pressures on electrical properties of ITO thin films deposited by R.F. magnetron sputteringlink

전용선; Jeon, Yong-Seon; et al, 한국과학기술원, 2002

1098
Reaction sintering of dense LATP solid-state electrolyte ceramics for all-solid-state lithium-ion batteries = 전고체 리튬 이온 전지용 고밀도 LATP 고체 전해질 세라믹의 반응 소결link

Kim, Dong Gyu; Kim, Do Kyung; et al, 한국과학기술원, 2019

1099
Reaction Sintering Process and Characterization of NASICON Solid Electrolyte Ceramics = NASICON 고체 전해질 세라믹스의 반응 소결 공정 및 특성 평가link

Jung, Sewoon; Kim, Do Kyung; et al, 한국과학기술원, 2017

1100
Reactive magnetron sputter ion plating법에 의해 증착된 TiN 박막의 특성에 관한 연구 = A study on characteristics of the TiN thin films deposited by reactive magnetron sputter ion plating.link

강희수; Kang, Hee-Soo; et al, 한국과학기술원, 1996

rss_1.0 rss_2.0 atom_1.0