Browse "Dept. of Chemical and Biomolecular Engineering(생명화학공학과)" by Type Thesis(Master)

Showing results 1345 to 1364 of 1783

1345
나노여과의 이온 분리 특성에 대한 연구 및 발효 유산 정제에의 응용 = A study on the characteristics of ion separation by nanofiltration and its application to the recovery of lactic acid from fermentation brothlink

강상현; Kang, Sang-Hyeon; et al, 한국과학기술원, 1999

1346
나노크기 Fumed Silica의 표면 개질 = Surface modification of nanosize fumed silicalink

송신애; Song, Shin-Ae; et al, 한국과학기술원, 2002

1347
나일론 6-폴리우레탄-나일론 6 블록 공중합체의 구조와 물성에 관한 연구 = A study on the structure and bulk properties of nylon 6-polyurethane-nylon 6 block copolymerslink

백덕만; Back, Duck-Man; et al, 한국과학기술원, 1984

1348
내부 순환유동층 연소로에서 석탄연소 및 열전달 특성 = Coal combustion and heat transfer characteristics in an internal circulating fluidized bed combustorlink

박승식; Park, Seung-Sik; et al, 한국과학기술원, 1990

1349
내부 순환유동층연소로의 수력학적 특성 및 CWM(coal-water-mixture)의 연소특성 = Hydrodynamics and CWA(coal-water-mixture) combustion characteristics in a circulating fluidized bed with a draft tubelink

이운재; Lee, Woon-Jae; et al, 한국과학기술원, 1991

1350
내부순환 슬러리 기포탑에서의 휘발성 유기화합물 (TCE/Toluene) 의 광촉매 반응에 의한 동시제거 = Simultaneous removal of volatile organic compounds (TCE/Toluene) by photocatalytic reactions in an internally-circulating slurry bubble columnlink

전진희; Jeon, Jin-Hee; et al, 한국과학기술원, 2002

1351
내부순환 유동층 반응기에서 연소에 의한 잔사유 탈황 폐촉매 재생 특성 = Regeneration characteristics of spent vacuum residue hydrodesulfurization catalysts by combustionlink

정대성; Jung, Dae-Sung; et al, 한국과학기술원, 2003

1352
내부순환유동층 반응기에서의 폐타이어 가스화 특성 연구 = Gasification characteristics of waste tire in an internally circulating fluidized bedlink

이승엽; Lee, Seung-Yup; et al, 한국과학기술원, 2000

1353
내부순환유동층반응기에서의 석탄가스화 반응 특성 = Coal gasification characteristics in an internally circulating fluidized bed reactorlink

김용전; Kim, Yong-Jeon; et al, 한국과학기술원, 1996

1354
내부순환유동층에서의 수력학적 특성 = Hydrodynamics of an internally circulating fluidized bedlink

김요한; Kim, Yo-Han; et al, 한국과학기술원, 2001

1355
냉각기를 이용한 CMSMPR 결정화기에서 붕산 수용액의 결정화에 관한 연구 = A study on crystallization of boric acid solution in CMSMPR crystallizer using coolinglink

김정국; Kim, Jeong-Guk; et al, 한국과학기술원, 1985

1356
노즐 형태가 난류 이중 제트에 미치는 영향 = The effects of nozzle geometry on turbulent dual jet flowlink

임태준; Lim, Tai-Jun; 정인재; 우성일; et al, 한국과학기술원, 1986

1357
니켈 담지 모델 촉매의 소결현상 = Sintering of the supported nickel model catalystslink

송헌식; Song, Heon-Sik; et al, 한국과학기술원, 1983

1358
니트로벤젠에서 아닐린 제조에의 촉매 및 공정개발 연구 = The vapor-phase catalytic hydrogenation of nitrobenzene to anilinelink

김종팔; 윤현기; Kim, Jong-Pal; Yoon, Hyeon-Gi; et al, 한국과학기술원, 1982

1359
다공성 실리콘 층에서의 크기분포 제어 = Control of pore size distribution in porous silicon layerlink

이기용; Lee, Ki-Yong; et al, 한국과학기술원, 1997

1360
다공성 양이온 교환수지를 촉매로 한 Isobutylene 의 수화반응에 대한 반응속도론적 연구 = Kinetic study on the hydration of isobutylene catalyzed by macroreticular cation exchange resinlink

정문조; Chung, Moon-Jo; 임선기; 박건유; et al, 한국과학기술원, 1986

1361
다공성 양이온 교환수지를 촉매로 한 tert-butyl alcohol 의 탈수반응에 대한 반응속도론적 연구 = Kinetic study on the dehydration of tert-butyl alcohol catalyzed by macroreticular cation exchange resinlink

이상득; Lee, Sang-Deuk; 임선기; 권영수; et al, 한국과학기술원, 1986

1362
다공성 입자 구조형 양이온 교환 수지 촉매의 제조 및 특성 = Synthesis and characteristics of the macroreticular cation-exchange resin catalystlink

김용만; Kim, Yong-Man; et al, 한국과학기술원, 1986

1363
다단계 기공구조개선에 의한 알루미나막 제조 및 수소분리특성 = Preparation of alumina membrane via multistep pore modification and hydrogen separation characteristicslink

윤건영; Yoon, Keon-Yeong; et al, 한국과학기술원, 1996

1364
다단플래시 공정의 응축기 열전달 해석 = Analysis of heat transfer in condenser of multistage flash distillation processlink

서성준; Su, Sung-Joon; et al, 한국과학기술원, 1998

rss_1.0 rss_2.0 atom_1.0