Browse "Dept. of Chemical and Biomolecular Engineering(생명화학공학과)" by Type Thesis(Master)

Showing results 254 to 313 of 1783

254
Database design for double-linker metal-organic frameworks = 이중 리간드 금속 유기 구조체의 데이터베이스 설계에 관한 연구link

Ryu, Dayoung; Kim, Jihan; et al, 한국과학기술원, 2023

255
Deactivation and stabilization of cellulase complex = 셀룰라아제의 불활성화와 안정화에 관한 연구link

Kim, Ming-Hong; 김민홍; et al, 한국과학기술원, 1981

256
Decarboxylation of Fatty Acid over Pd Supported Mesoporous Carbon = 팔라듐 나노입자가 담지된 메조다공성 탄소의 지방산 탈이산화탄소 반응에 대한 연구link

Kim, Young-Jin; 김영진; et al, 한국과학기술원, 2011

257
Decarboxylation of Fatty Acid over Pd Supported Mesoporous Carbon = 팔라듐 나노입자가 담지된 메조다공성 탄소의 지방산 탈이산화탄소 반응에 대한 연구link

Kim, Young-Jin; 김영진; et al, 한국과학기술원, 2011

258
Decentralized control of the tennessee eastman process = 테네시-이스트만 공정의 분산 제어link

Kang, Il; 강일; et al, 한국과학기술원, 1999

259
Decorated-UNIQUAC 모델에 의한 고분자 및 염 용액의 고리형 상평형 계산 = Calculations of phase equilibria for polymer and salt solutions forming closed-loop phase behavior by decorated-UNIQUAC modellink

이경옥; Lee, Kyung-Ok; et al, 한국과학기술원, 1991

260
Degradation of perchlorate using Pd/Activated carbon with adsorption/catalysis bi-functional roles = 흡착/촉매 다기능 물질의 설계를 통한 퍼클로레이트 이온 제거 방법에 관한 연구link

Kim, You-Na; 김유나; et al, 한국과학기술원, 2013

261
Delivery of niacinamide to the skin using microneedle-like particles = 마이크로니들형 파티클을 이용한 나이아신아마이드의 피부 전달link

Shin, Chong In; Kim, Yeu-Chun; et al, 한국과학기술원, 2018

262
Dependence of the capacity ratio on the composition of the mobile phase in liquid adsorption chromatography = 액체 흡착 크로마토 그래피에서 이동상의 조성이 용량비에 미치는 영향link

Woo, Je-Wan; 우제완; et al, 한국과학기술원, 1984

263
Depletion-induced crystallization of colloidal particles and regioselective crystal deposition = 고갈력 기반의 콜로이드 결정화 및 패턴화link

Park, Sanghyuk; Kim, Shin-Hyun; et al, 한국과학기술원, 2020

264
Depletion-mediated colloidal crystallization in double-emulsion drops for structural coloration = 이중 액적 내 고갈력 기반의 콜로이드 결정화 제어 및 구조색 발현link

Kim, Young Geon; Kim, Shin-Hyun; et al, 한국과학기술원, 2022

265
Depolymerization of PET by glycolysis = 글리콜리시스를 이용한 PET 해중합 : 일반화 속도론 및 촉매설계link

Sangalang, Arvin A.; Kim, Do Hyun; et al, 한국과학기술원, 2014

266
Derivation of a nickel-silica catalyst by coke formation = 코크 생성에 의한 니켈촉매의 비활성화link

Shim, Jae-Jin; 심재진; et al, 한국과학기술원, 1982

267
Design and analysis of sustainable chemical process employing dry reforming of methane reaction = 건식 개질 반응을 활용하는 지속 가능한 화학 공정의 설계 및 분석link

임형묵; Lee, Jay Hyung; 이재형, 한국과학기술원, 2017

268
Design and fabrication of electrowetting microfluidic devices = 전기습윤 마이크로플루이딕 소자의 설계와 제작link

Hong, Seok-Hwan; 홍석환; et al, 한국과학기술원, 2006

269
Design and operating condition analysis of pre-reformer and membrane reactor through CFD modeling and process simulation = 예비 개질기와 분리막 반응기의 CFD 모델링 및 공정 모사를 통한 장치 설계 및 운전 조건 분석link

Choi, Hong Bum; Lee, Jay Hyung; et al, 한국과학기술원, 2019

270
Design and performance analysis of multi-tube membrane reactor for hydrogen production using CFD simulation = 수소 생산을 위한 다중 튜브 분리막 반응기의 CFD 모사를 통한 장치 설계 및 성능 분석link

Kim, Beom Su; Lee, Jay Hyung; et al, 한국과학기술원, 2022

271
Design and screening of metal organic frameworks for ethane/ethylene separation = 에테인-에틸렌 분리를 위한 금속 유기 구조체 디자인 및 스크리닝link

Han, Seunghee; Kim, Jihan; et al, 한국과학기술원, 2023

272
Design and techno-economic analysis of CO$_2$ mineralization process integrated with desalination = 담수화 연계 이산화탄소 광물화 공정 설계 및 경제성 평가 연구link

Jung, Dabin; Lee, Jay Hyung; et al, 한국과학기술원, 2017

273
Design of an ammonia-carbon dioxide forward osmosis desalination process = 암모니아-이산화탄소를 사용하는 정삼투식 담수화 공정의 설계link

Jang, Hong; 장홍; et al, 한국과학기술원, 2011

274
Design of an ammonia-carbon dioxide forward osmosis desalination process = 암모니아-이산화탄소를 사용하는 정삼투식 담수화 공정의 설계link

Jang, Hong; 장홍; et al, 한국과학기술원, 2011

275
Design of highly regenerable zeolite-based carbon-dioxide adsorbent in temperature swing adsorption = 온도교대흡착 공정에서 높은 재생 안정성을 지니는 제올라이트 기반의 이산화탄소 흡착제 개발에 관한 연구link

Kim, Chaehoon; Choi, Minkee; et al, 한국과학기술원, 2017

276
Design of metal-organic framework for post combustion carbon capture using the synergistic effect of metal catechol = 금속 카테콜의 협력 작용을 활용한 연소 후 탄소 포집용 금속 유기 구조체 설계link

Lee, Jaewoong; Kim, Jihan; et al, 한국과학기술원, 2022

277
Design of new adsorbents using elemental sulfur and NaX Zeolite for selective removal of radioactive cesium = 방사성 세슘의 선택적 제거를 위한 원소 황과 제올라이트를 이용한 새로운 흡착제 개발에 관한 연구link

Kim, Young-Gu; Choi, Minkee; et al, 한국과학기술원, 2018

278
Design of new conjugated polymer for higher $V_{oc}$ in organic photovoltaics = 유기태양전지의 $V_{oc}$를 높이기 위한 새로운 전도성 고분자 설계link

Kang, Hyun-Bum; 강현범; et al, 한국과학기술원, 2011

279
Design of new conjugated polymer for higher $V_{oc}$ in organic photovoltaics = 유기태양전지의 $V_{oc}$를 높이기 위한 새로운 전도성 고분자 설계link

Kang, Hyun-Bum; 강현범; et al, 한국과학기술원, 2011

280
Design of novel biosynthetic pathways for the production of industrially valuable chemicals = 산업적으로 유용한 화학 물질을 생산하기 위한 신규 생합성 경로의 설계link

Kim, Dong In; Lee, Sang Yup; et al, 한국과학기술원, 2019

281
Design of responsive fluorescence-switching hybrid nanocomposite through selective layering of nanoparticles = 블록 공중합체 콜로이드 내 나노 입자의 선택적 배열을 통한 형광 스위칭 나노 복합체의 제조에 관한 연구link

Kim, Taewan; Kim, Bumjoon; et al, 한국과학기술원, 2020

282
Design of the terminal group of small molecule acceptors for controlling the interaction with polymer donor and their photovoltaic performances = 논풀러렌 단분자의 말단기에 따른 고분자와의 상호작용과 유기 태양전지의 효율에 대한 연구link

Lee, Hyun-gyeong; Kim, Bum -joon; et al, 한국과학기술원, 2020

283
Design, simulation, and feasibility study of a combined $CO_2$ mineralization and brackish water desalination process = 이산화탄소 광물화와 강물담수화 통합공정 설계, 모사 및 타당성 평가 연구link

Oh, Jaewoo; Lee, Jay Hyung; et al, 한국과학기술원, 2019

284
Designing auxetic pattern with elastic photonic crystals for ultrasensitive mechanochromism = 초민감도 역학 변색 특성 구현을 위한 탄성 광결정 비대 촉진 패턴의 설계link

Lee, Hwanyoung; Kim, Shin-Hyun; et al, 한국과학기술원, 2023

285
Designing cholesteric liquid-crystal multishells through liquid-liquid phase separation in emulsion drops = 액적 내 상분리를 통한 콜레스테릭 액정 다중 쉘 구조의 설계link

Park, Sihun; Kim, Shin-Hyun; et al, 한국과학기술원, 2021

286
Designing core-shell microparticles for programmed release through reaction-diffusion mediated photolithography = 반응-확산 포토리소그래피를 이용한 방출 제어형 코어-쉘 마이크로입자의 설계link

Je, Kwanghwi; Kim, Shin-Hyun; et al, 한국과학기술원, 2017

287
Designing macroporous hydrogels with polar-solvents-sensitive photonic property = 다공성 하이드로젤로 구성된 극성 용매 민감성 광결정 설계link

Kim, Jong Hyun; Kim, Shin-Hyun; et al, 한국과학기술원, 2020

288
Designing multicolor patterns of inverse opals with photonic bandgap and surface plasmon resonance = 광밴드갭과 표면플라즈몬공명을 동시에 갖는 다색 역오팔 미세 패턴의 설계link

Lee, Han Gyeol; Kim, Shin Hyun; et al, 한국과학기술원, 2017

289
Designing multicolor patterns of plasmonic metasurfaces using particles-anchored water-resin interface = 콜로이드 입자가 흡착된 물-레진 계면을 이용한 다색 플라즈모닉 메타표면 패턴 설계link

Kim, Minjung; Kim, Shin-Hyun; et al, 한국과학기술원, 2022

290
Designing osmotically-inflated microcapsules with ultra-thin shell for mechanical-stress-triggered-release = 삼투압에 의해 팽윤된 초박막 미세캡슐의 설계 및 기계적 응력에 의한 방출 제어link

Hamonangan, Wahyu Martumpal; Kim, Shin-Hyun; et al, 한국과학기술원, 2021

291
Designing photonic crystals with ultranarrow stopband through spontaneous crystallization of polymeric colloids swollen by resin = 레진에 의해 팽윤된 고분자 콜로이드의 자발적 결정화를 이용한 초단폭 광밴드갭 구현link

Jo, Hyeonbin; Kim, Shin-Hyun; et al, 한국과학기술원, 2023

292
Designing photonic microcapsules with cooling-rate-dependent colloidal arrangement and optical property = 냉각 속도에 따른 마이크로캡슐 내 콜로이드 결정화도 및 광학 특성 제어link

Kim, Do-Eun; Kim, Shin-Hyun; et al, 한국과학기술원, 2022

293
Designing SERS-active microgels containing highly concentrated gold nanoparticles for selective detection of small molecules = 라만 산란 기반의 선택적 분자 검출을 위한 고농축 금나노입자가 담지된 마이크로젤의 설계link

Kim, Yeong-Hwa; Kim, Shin-Hyun; et al, 한국과학기술원, 2019

294
Designing thermochromic liquid crystal microcapsules for temperature monitoring at microenvironment = 미세환경 내 온도 측정을 위한 온도 변색 액정 마이크로캡슐의 설계link

Oh, Yoonjin; Kim, Shin-Hyun; et al, 한국과학기술원, 2022

295
Designing three-dimensional polymeric structures using capillary wetting on colloidal monolayer = 콜로이드 단층 배열의 젖음 현상을 이용한 3차원 고분자 구조체 설계link

Lee, Hyeong Jun; Kim, Shin-Hyun; et al, 한국과학기술원, 2022

296
Determination of tensile strength of microalgal cellulose microfibrils by cavitation-induced scission = 공동현상 유도 절단을 통한 미세조류 셀룰로오스 미세섬유의 인장 강도 결정 연구link

Lee, Hyun-Ro; 이현로; et al, 한국과학기술원, 2016

297
Development and application of stretchable nano-adhesive for lamination of various soft substrates via initiated chemical vapor deposition (iCVD) inducing interpenetrating polymer network (IPN) = 개시제를 이용한 화학 기상 증착 공정을 통해 IPN 이 유도된 연신성 나노 접착제 개발 및 다양한 신축성 기판 접착에의 적용link

Lee, Yu-Jin; Im, Sung Gap; et al, 한국과학기술원, 2021

298
Development mitochondrial destabilizing polypeptide inducing immunogenic cell death for enhanced cancer immunotherapy = 암 면역치료를 위한 면역원성 세포사 유도 미토콘드리아 불안정화 폴리펩타이드 개발link

Soon, Jaejoon; Kim, Yeu-Chun; et al, 한국과학기술원, 2022

299
Development of a chemically defined medium for succinic acid production of mannheimia succiniciproducens MBEL55E = Mannheimia succiniciproducens MBEL55E의 생물학적 숙신산 생산을 위한 화학적 제한 배지 개발link

Choi, Bo-Kyung; 최보경; et al, 한국과학기술원, 2006

300
Development of a computer-aided tool for high-throughput analysis and evaluation of low-TRL microalgal systems for process synthesis = 기초 연구단계에서 미세조류공정 설계를 위한 컴퓨터 기반의 분석 및 평가 도구 개발link

Lee, Jee Hwan; Lee, Jay Hyung; et al, 한국과학기술원, 2019

301
Development of a diagnostic technique for acute myeloid and promyelocytic leukemia using label-free 3D holo-tomographic image and deep learning = 비표지 3D 홀로그래피 이미지와 딥러닝을 이용한 급성 골수성 및 전골수성 백혈병 진단기술 개발link

Lee, Yong-ki; Kim, Yoosik; et al, 한국과학기술원, 2020

302
Development of a high-throughput centrifugal loop-mediated isothermal amplification microdevice for multiplex foodborne pathogenic bacteria detection = 식중독균 다중 검출을 위한 고속 고효율 회전식 등온 증폭 마이크로 디바이스 개발link

Seo, Ji Hyun; 서지현; Lee, Doh Chang; 이도창; et al, 한국과학기술원, 2016

303
Development of a microdevice for metastatic cancer diagnosis = 전이성 암 진단을 위한 마이크로디바이스 개발에 대한 연구link

Choi, Seok Jin; Kim, Yeu-Chun; et al, 한국과학기술원, 2017

304
Development of a new organic working fluid and cycle simulation for absorption heat pump = 흡수식 열펌프를 위한 새로운 유기 작동유체의 개발 및 사이클 시뮬레이션link

Lee, Jong-Won; 이종원; et al, 한국과학기술원, 2000

305
Development of a novel subunit vaccine against streptococcosis in olive flounder (paralichthys olivaceus) and novel delivery method for FMD vaccination in pigs and cattle = 넙치 연쇄상구균증의 신규 서브유닛 개발 및 구제역 백신의 신규 약물전달 방법 연구link

Membrebe, Juver; Juver; et al, 한국과학기술원, 2015

306
Development of a PDMS scaffold for the cultivation of animal cells = 동물 세포 배양을 위한 PDMS 지지체 개발link

Choi, Ayoung; Kim, Do Hyun; et al, 한국과학기술원, 2019

307
Development of a plasmid display system based on Oct-1 DNA binding protein for in vitro screening of functional proteins = 기능성 단백질의 in vitro 탐색을 위한 Oct-1 DNA 결합 단백질 기반의 플라스미드 디스플레이 시스템의 개발link

Kwon, Hyuk-Woong; 권혁웅; et al, 한국과학기술원, 2011

308
Development of a real-time analysis platform for the transport of drug molecules through a phospholipid bilayer = 인지질 이중막을 통한 약물 분자의 이동 실시간 분석 플랫폼 개발link

Lee, Yohan; Choi, Siyoung; et al, 한국과학기술원, 2018

309
Development of a rotating microdevice for multiplex single nucleotide polymorphism typing using rolling circle amplification = 회전환 증폭 시스템을 이용한 다중 유전자 다형성 분석용 회전형 마이크로디바이스 개발link

Heo, Hyun Young; 허현영; et al, 한국과학기술원, 2015

310
Development of a simulation model of a LNG Tank integrating interfacial mass transfer through CFD = LNG 탱크 내의 계면 물질 전달을 반영한 CFD 모사 모델 개발link

Bae, Sung jin; Lee, Jay Hyung; et al, 한국과학기술원, 2019

311
Development of a thiazole-containing alpha helical artificial polypeptide as immunogenic cell death inducer for effective cancer immunotherapy = 효과적인 면역항암요법을 위한 싸이아졸 고리 구조를 포함하는 알파 나선 인공 폴리펩타이드의 개발link

Park, Jeongho; Kim, Yeu-Chun; et al, 한국과학기술원, 2023

312
Development of a transferable force field between MOF and its polymorph = 금속-유기 구조체의 다형체간 호환 가능한 역장 개발link

Kim, Kyeongrim; Kim, Jihan; et al, 한국과학기술원, 2023

313
Development of an one-step centrifugal microdevice for real-time and multiplex identification of food poisoning bacteria = 식중독균의 실시간 다중검출을 위한 원스템 회전식 유전자 진단 마이크로 디바이스 개발link

Choi, Goro; Seo, Tae Seok; et al, 한국과학기술원, 2016

rss_1.0 rss_2.0 atom_1.0