Browse "Dept. of Chemical and Biomolecular Engineering(생명화학공학과)" by Title 

Showing results 13981 to 14000 of 26549

13981
MORPHOLOGICAL-STUDY OF HDPE PREPARED WITH THE HIGHLY-ACTIVE SILICA SUPPORTED TICL4 MGCL2 CATALYST

KIM, I; Woo, Seong-Ihl, POLYMER JOURNAL, v.21, no.9, pp.697 - 707, 1989

13982
Morphology and Barrier Properties of the HDPE/Nylon Blends

김성철, 한국고분자학회 추계학술발표회, pp.9 - 10, 1992

13983
Morphology and DMFC Membrane Properties of Nafion / ORMOSIL Hybrids

김성철, 한국공업화학회 춘계학술대회, 2009

13984
Morphology and DMFC Membrane Properties of Nafion/ORMOSIL Hybrids

김성철, 한국고분자학회 추계학술대회, 2009

13985
Morphology and DMFC Membrane Properties of Sulfonated Poly(arylene ether sulfone)/Diethoxydimethylsilane Hybrids

김성철, 한국고분자학회 추계학술대회, 2009

13986
Morphology and electrochemical behaviour of ruthenium oxide thin film deposited on carbon paper

Park, JH; Park, OOk, JOURNAL OF POWER SOURCES, v.109, no.1, pp.121 - 126, 2002-06

13987
Morphology and Gas Barrier Properties Polyolefin/EVOH Blends.

Kim, Sung Chul, International Symposium on Polymers for Advanced Technology, 1997

13988
Morphology and hydrolysis of PCL/PLLA blends compatibilized with P(LLA-co-epsilon CL) or P(LLA-b-epsilon CL)

Choi, Nam-Soon; Kim, CH; Cho, KY; Park, Jung-Ki, JOURNAL OF APPLIED POLYMER SCIENCE, v.86, no.8, pp.1892 - 1898, 2002-11

13989
Morphology and luminescence of (GdY)(2)O-3 : Eu particles prepared by colloidal seed-assisted spray pyrolysis

Roh, HS; Kang, YC; Park, SeungBin, JOURNAL OF COLLOID AND INTERFACE SCIENCE, v.228, no.2, pp.195 - 199, 2000-08

13990
Morphology and mechanical properties of IPNs based on styrenic block copolymers

Kim, Sung Chul, 36th IUPAC international symposium on macromolecules, 1996

13991
Morphology and Mechanical Properties of PET - PHB and Ploycarbonate Blends

S.H. Jung; Kim, Sung Chul, POLYMER JOURNAL, v.20, no.1, pp.73, 1988-06

13992
Morphology and mechanical properties of styrene-butadiene-styrene/poly(methyl methacrylate-co-n-butyl acrylate) interpenetrating polymer networks

Han, M.H.; Kim, Sung Chul, POLYMERS FOR ADVANCED TECHNOLOGIES, v.8, no.12, pp.741 - 746, 1997-12

13993
Morphology and micromechanical behaviour of ethylene cycloolefin copolymers (COC)

Seydewitz, V; Krumova, M; Michler, GH; Park, JY; Kim, Sung Chul, POLYMER, v.46, no.15, pp.5608 - 5614, 2005-07

13994
Morphology and Oxygen Barrier Effects onPolyethylene/EVAL Blends

Kim, Sung Chul, PPS Asia, Australia regional Meeting, 1996

13995
Morphology and oxygen barrier properties of LDPE/EVOH blends

Lee, SY; Kim, Sung Chul, INTERNATIONAL POLYMER PROCESSING, v.11, no.3, pp.238 - 247, 1996-09

13996
Morphology and Pervaporation Characteristics of PAA/Poly(BMA-co-MMA) IPN Membranes

Kim, Sung Chul, 4th International Symposium on Separation Technology, 2004

13997
Morphology and physical properties of In-situ composites based on specialty EP and TLCP = 특수 엔지니어링 플라스틱과 열방성 액정고분자계 인시츄 콤포지트의 구조와 물성link

Hong, Soon-Man; 홍순만; Kim, Kwang-Ung; Chung, In-Jae; et al, 한국과학기술원, 1992

13998
Morphology and physical properties of polyacrylonitrile fibers spun from a spinning dope with or without zinc chloride = 염화아연을 포함 혹은 미포함한 방사용액에서 방사된 폴리아크릴로나이트릴 섬유의 형태 및 물성link

Cho, Seo-Hyun; 조서현; Chang, In-Jae; Lee, Wha-Seop; et al, 한국과학기술원, 1993

13999
Morphology and Properties of Cellulose Acetate Hollow fiber Membranes

Kim, Sung Chul, 1984 Korea-China Seminar on Textile Engineering, 1984

14000
Morphology and Properties of Dicyanate/Polyarylate semi-IPN

김성철, 한국고분자학회 추계학술발표회, pp.8 - 9, 1993

rss_1.0 rss_2.0 atom_1.0