Browse "Dept. of Chemical and Biomolecular Engineering(생명화학공학과)" by Type Thesis(Master)

Showing results 1581 to 1600 of 1783

1581
유가식 발효 공정에서의 기질 농도 제어를 위한 Neuro-fuzzy 알고리듬 = A neuro-fuzzy algorithm for control of substrate concentration in fed-batch fermentationlink

박명석; Park, Myeong-Seok; et al, 한국과학기술원, 1992

1582
유기 벤젠술폰산 수용액상에서의 이소부틸렌의 용해도 = Solubilities of isobutylene in the aqueous solutions of alkylbenzene sulfonic acidslink

임치택; Lim, Chi-Taek; et al, 한국과학기술원, 1987

1583
유기염에 의한 폴리에틸렌테레프탈레이트 필름의 결정화에 관한 연구 = A study on crystallization of poly(ethylene terephthalate) film by organic saltlink

엄상무; Eum, Sang-Moo; et al, 한국과학기술원, 1988

1584
유기용매에서 Lipase에 의한 폴리에스터의 합성 = Preparation of [AA-BB]x polyester by lipase catalyzed transesterification in anhydrous organic solventslink

박현규; Park, Hyun-Kyu; et al, 한국과학기술원, 1992

1585
유기질 폐기물 처리에 의한 바이오 가스와 균체 단백질 생산 시스템 연구 = The study on integrated biomass system for biogas and S.C.P. production by organic waste treatmentlink

조재경; Cho, Jae-Kyoung; et al, 한국과학기술원, 1985

1586
유동층 내 철광석 입도 분포에 따른 유동 특성 고찰 = The effect of iron particle size distribution on fluidization characteristics in a fluidized bed reactorlink

고창국; Ko, Chang-Kuk; et al, 한국과학기술원, 2007

1587
유동층 반응기에서 Polystyrene과 polyethylene(glycol)의 플라즈마 그래프트 중합 = Surface modification of polystyrene by plasma grafting of PEG in a fluidized bed reactorlink

송이화; Song, Lee-Hwa; et al, 한국과학기술원, 2002

1588
유동층 반응기에서 urea 를 환원제로 이용한 NOx 의 선택적 촉매 환원 = Selective catalytic reduction of NOx using urea as reducing agent in a fluidized bed reactorlink

노선아; Roh, Seon-Ah; et al, 한국과학기술원, 2000

1589
유동층 반응기에서 부분 연소를 통한 폐타이어의 열분해 특성 연구 = Pyrolysis of waste tire with partial oxidation in a fluidized bed reactorlink

이종민; Lee, Jong-Min; et al, 한국과학기술원, 1994

1590
유동층 연소로에 설치된 수직전열관에서의 열전달 = Heat transfer to vertical tubes in a fluidized bed combustorlink

박영철; Bak, Young-Cheol; et al, 한국과학기술원, 1985

1591
유동층 연소로에서 석탄 슬러리 연소 및 열전달 특성 = Coal-water mixture(CWM) combustion and heat transfer characteristics in a fluidized bed combustorlink

임평옥; Lim, Pyeung-Ok; et al, 한국과학기술원, 1990

1592
유동층 예비 가소 기의 유동 영역 특성 = Flow regime characteristics of a fluidized bed precalcinerlink

이정수; Lee, Jung-Soo; et al, 한국과학기술원, 1981

1593
유동층열교환기에서의 기포특성 = Bubble characteristics in a fluidized bed heat exchangerlink

안정렬; Ahn, Jung-Yeul; et al, 한국과학기술원, 2001

1594
유동층을 이용한 올소포스페이트 혼합용액의 건조시 입자의 성장특성 = Growth of particles in drying of orthophosphate solution in a fluidized bedlink

송병호; Song, Byung-Ho; 김상돈; 이원국; et al, 한국과학기술원, 1988

1595
유동화 입자의 변화에 따른 유동층 전극반응기의 효율 = Performance of fluidized bed elecrtrode reactor with variation of fluidizing particleslink

박중곤; Park, Joong-Kon; et al, 한국과학기술원, 1981

1596
유리 모세관 점도 계로 측정한 폴리파라페닐렌테레프탈아미드의 점도에 대한 연구 = A study on the viscosity of poly-p-phenyleneterephthalamide(PPTA) measured in glass capillary tube viscometerslink

윤종한; Yoon, Jong-Han; et al, 한국과학기술원, 1985

1597
유연격자를 함유한 액정성 폴리에스터 아마이드의 유변학적성질의 비교 연구 = A study on comparison of rheological properties in liquid crystalline polyester amide with flexible spacerlink

한명수; Han, Myung-Soo; et al, 한국과학기술원, 1992

1598
유한 요소법을 이용한 코팅흐름에 관한 연구 = The study on coating flow with finite element methodlink

조서현; Cho, Seo-Hyun; 정인재; 우성일; et al, 한국과학기술원, 1986

1599
유화중합방법에 의해 제조된 전기 전도성 폴리아닐린-폴리카보네이트 복합체의 물리적 및 전기적 성질 = Physical and electrical properties of electrically conductive polyaniline- polycarbonate composites prepared by the emulsion polymerizationlink

전병호; Jeon, Byoung-Ho; et al, 한국과학기술원, 1998

1600
융제를 이용한 솔-젤법에 의한 티타니아/실리카 혼합산화물의 성질 및 Trichloroethylene 광분해 활성 = Characteristics of titania/slicla mixed oxide prepared by flux-assisted sol-gel processing and its photoactivity on trichloroethylene decompositionlink

김현석; Kim, Hyun-Suk; et al, 한국과학기술원, 2001

rss_1.0 rss_2.0 atom_1.0