DC Field | Value | Language |
---|---|---|
dc.contributor.author | 오용석 | - |
dc.contributor.author | 강현욱 | - |
dc.contributor.author | 최동윤 | - |
dc.contributor.author | 고승환 | - |
dc.contributor.author | 성형진 | - |
dc.date.accessioned | 2013-03-29T07:32:57Z | - |
dc.date.available | 2013-03-29T07:32:57Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2010-11-03 | - |
dc.identifier.citation | 대한기계학회 2010년도 추계학술대회 , v., no., pp.1701 - 1705 | - |
dc.identifier.uri | http://hdl.handle.net/10203/169063 | - |
dc.description.abstract | Aerosol jet printing system that consists of ultrasonic atomizer and converging nozzle with micro-capillary is non-contact process, allowing conductive patterning over existing structure as well as low-cost method for printed electronics. When patterning the conductive line on glass substrate, it was heated at 120℃ to deal with coffee stain effect. In addition, in order to get a better conductivity in patterned line, the sintering process as after-treatment is very important. In this study, we investigate the sintering effect(~450℃) of Ag nano particle(~50㎚) to achieve better electric characteristics. | - |
dc.language | KOR | - |
dc.publisher | 대한기계학회 | - |
dc.title | 에어로졸 제트 프린팅을 이용한 라인 패터닝의 전기적 특성 향상을 위한 소결 공정 | - |
dc.title.alternative | Sintering process for electric characteristics improvement of line patterning using aerosol jet printing | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 1701 | - |
dc.citation.endingpage | 1705 | - |
dc.citation.publicationname | 대한기계학회 2010년도 추계학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 성형진 | - |
dc.contributor.nonIdAuthor | 오용석 | - |
dc.contributor.nonIdAuthor | 강현욱 | - |
dc.contributor.nonIdAuthor | 최동윤 | - |
dc.contributor.nonIdAuthor | 고승환 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.