Design and control of a nanoprecision XY Theta scanner

Abstract

This paper describes the design and control of a nanoprecision XY Theta scanner consisting of voice coil motors and air bearing guides. The proposed scanner can be installed on a conventional XY stage with long strokes to improve the positioning accuracy and settling performance. Major design considerations in developing a high precision scanner are sensor accuracy, actuator properties, structural stability, guide friction, and thermal expansion. Considering these factors, the proposed scanner is made of invar, which has a small thermal expansion coefficient and good structural stiffness. Four voice coil motors drive the scanner, which is suspended by four air bearing pads, in the x, y, and theta directions. The scanner's position is measured by three laser interferometers which decouple the scanner from the conventional stage. The mirror blocks reflecting the laser beams are fixed using viscoelastic sheets, ensuring that the scanner has a well-damped structural mode. A time delay control algorithm is implemented on the real-time controller to control the scanner. The effectiveness of the proposed scanner is verified experimentally. (C) 2008 American Institute of Physics.