DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김광섭 | ko |
dc.contributor.author | 강지훈 | ko |
dc.contributor.author | 김경웅 | ko |
dc.date.accessioned | 2009-12-24T01:33:33Z | - |
dc.date.available | 2009-12-24T01:33:33Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2008-10 | - |
dc.identifier.citation | 한국윤활학회지, v.24, no.5, pp.255 - 263 | - |
dc.identifier.issn | 1229-4845 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15790 | - |
dc.description.abstract | Adhesion tests were conducted to investigate the adhesion characteristics between mold and thermoplastic polymer film. Coating of anti-sticking layer (ASL), a kind of polymer material, imprint pressure, and separation velocity were considered as the process conditions. A piece of fused silica without patterns on its surface was used as a mold and the thermoplastic polymer films were made on Si substrate by spin-coating the commercial polymer solution such as mr-I PMMA and mr-I 7020. The ASL was derived from (1H, 1H, 2H, 2H -perfluorooctyl) trichlorosilane(F13-OTS) and coated on the fused silica mold in vapor phase. The pull-off force was measured in various process conditions and the surfaces of the mold and the polymer film were observed after separation. It was found that the adhesion characteristics between the mold and the thermoplastic polymer film and the release performance of ASL were changed according to the process conditions. The ASL was effective to reduce the pull-off force and the damage of polymer film. In cases of the mold coated with ASL, the pulloff force did not depend on imprint pressure and separation velocity | - |
dc.description.sponsorship | 21세기 프론티어연구개발 사업인 나노메카트로닉스기술개발사업(08K1401-00611) 및 Brain Korea21 프로젝트 | en |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 한국윤활학회 | - |
dc.title | 열 나노임프린트 리소그래피에서의 몰드와 열가소성 폴리머 필름 사이의 응착 특성 | - |
dc.title.alternative | Adhesion characteristics between mold and thermoplastic polymer film in thermal nanoimprint lithography | - |
dc.type | Article | - |
dc.subject.alternative | thermal nanoimprint lithography | en |
dc.subject.alternative | adhesion | en |
dc.subject.alternative | anti-sticking layer | en |
dc.subject.alternative | thermoplastic polymer film | en |
dc.type.rims | ART | - |
dc.citation.volume | 24 | - |
dc.citation.issue | 5 | - |
dc.citation.beginningpage | 255 | - |
dc.citation.endingpage | 263 | - |
dc.citation.publicationname | 한국윤활학회지 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 김경웅 | - |
dc.contributor.nonIdAuthor | 김광섭 | - |
dc.contributor.nonIdAuthor | 강지훈 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.