DC Field | Value | Language |
---|---|---|
dc.contributor.author | 박형호 | ko |
dc.contributor.author | 김상수 | ko |
dc.date.accessioned | 2009-12-22T07:02:50Z | - |
dc.date.available | 2009-12-22T07:02:50Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1999-03 | - |
dc.identifier.citation | 대한기계학회논문집 B, v.23, no.3, pp.299 - 310 | - |
dc.identifier.issn | 1226-4881 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15605 | - |
dc.description.abstract | Effect of electrostatic and inertial forces on the pre-charged particle deposition was theoretically and experimentally studied by introducing the inertia impactor subjected to an electric field. To derive the analytic solution, we assumed that a flow was an ideal stagnation flow, a particle had saturation charges, and the electric field within the test section was uniform. On the other hand, Al2O3 particle groups were used as the test particles, which mean sizes were 1μm, 3μm, and 5μm. To measure the deposition efficiency, the light scattering method was used. The results showed that the deposition efficiency was minimized at a certain nozzle velocity as increasing the nozzle velocity, only if the electric force was applied. As the electric field strength increased, Stk501/2 was decreased, and its decreasing rate was reduced with increasing the flow velocity. Moreover the existence of electric field was against the cut-off performance of the inertia impactor. | - |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 대한기계학회 | - |
dc.title | 전기장이 형성된 관성 충돌기에서 대전 입자의 거동과 부착 특성에 대한 연구 | - |
dc.title.alternative | Pre-Charged Particle Deposition in an Impactor subjected to an Electric Field | - |
dc.type | Article | - |
dc.subject.alternative | Electrostatic Precipitator | en |
dc.subject.alternative | Two-Stage Electrostatic Precipitator | en |
dc.subject.alternative | Impactor | en |
dc.subject.alternative | Corona Discharge | en |
dc.subject.alternative | Stagnation Flow | en |
dc.subject.alternative | Light Scattering Method | en |
dc.type.rims | ART | - |
dc.citation.volume | 23 | - |
dc.citation.issue | 3 | - |
dc.citation.beginningpage | 299 | - |
dc.citation.endingpage | 310 | - |
dc.citation.publicationname | 대한기계학회논문집 B | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 김상수 | - |
dc.contributor.nonIdAuthor | 박형호 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.