DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김효찬 | - |
dc.contributor.author | 안동규 | - |
dc.contributor.author | 이상호 | - |
dc.contributor.author | 양동열 | - |
dc.date.accessioned | 2013-03-18T19:33:57Z | - |
dc.date.available | 2013-03-18T19:33:57Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 2003 | - |
dc.identifier.citation | 한국정밀공학회 춘계학술대회 , v., no., pp.569 - 572 | - |
dc.identifier.uri | http://hdl.handle.net/10203/151743 | - |
dc.description.abstract | In VLM-ST process, the fine detailed shape processing process is needed due to the use of thick sheets for layers. The developed process perform the fine detailed shape processing in VLM-ST parts using non-contact hot tool. To predict the heat-affected zone and temperature distribution of VLM-ST parts in detailed shaping, the heat flux from the tool to the surface was calculated for the finite element analysis by modeling the tool as a heat source of radiation. The dominant process parameters such as the radiated heat input, the tool speed, and the gap between the tool tip and the foam sheet (tool height) were considered in the analysis. The results showed a good agreement with the experiments. | - |
dc.language | KOR | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 비접촉식 열 공구를 이용한 미세 형상 가공에서의 열 영향부에 대한 수치적 모사에 관한 연구 | - |
dc.title.alternative | A study on numerical analysis of heat affected zone in detailed shape processing using Non-contact hot tool | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 569 | - |
dc.citation.endingpage | 572 | - |
dc.citation.publicationname | 한국정밀공학회 춘계학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 김효찬 | - |
dc.contributor.nonIdAuthor | 안동규 | - |
dc.contributor.nonIdAuthor | 이상호 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.