DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김기택 | ko |
dc.contributor.author | 정진호 | ko |
dc.contributor.author | 임용택 | ko |
dc.date.accessioned | 2009-12-16T06:49:11Z | - |
dc.date.available | 2009-12-16T06:49:11Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1994-01 | - |
dc.identifier.citation | 대한기계학회논문집 A, v.18, no.9, pp.2386 - 2395 | - |
dc.identifier.issn | 1226-4873 | - |
dc.identifier.uri | http://hdl.handle.net/10203/15065 | - |
dc.description.abstract | An experimental study on heat transfer and flow in compression molding of clss-B and A SMC(Sheet Molding Compounds) in a flat plate and a cross-sectional T-shape was carried out. The temperature was measured with thermocouples at two locations in the 4 layered SMC charge and pressure was measured at the center of the top mold during compression molding. Three different mold speeds, 15, 45, 50 mm/min and two different mold temperature, $130^{\circ}C{\;}and{\;}150^{\circ}C$ were used for compression molding experiments. Experiments with different colored SMC layers were used to study flow patterns at various compression stages. In oder to predict the pressure and load in SMC compression molding, slab method was used. The predicted values of pressure and load from the slab analysis were compared well with the measured data. | - |
dc.description.sponsorship | 본 연구는 한국과학재단의 연구지원사업에 의해 수행된 것으로 이에 관계자 제위께 감사드린다. 또한 SMC재료를 공급하여 주신 주식회사 애경화학 관계자 제위와 SMC압축실험을 위해 인장시험기의 사용을 허락해 주신 한국과학기술원 정밀공학과의 허 훈 교수님께도 감사드린다. | en |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 대한기계학회 | - |
dc.title | SMC 압축성형의 열 및 유동에 관한 실험적 연구 | - |
dc.title.alternative | An Experimental Study on Heat Transfer and Flow in Compression Molding of SMC | - |
dc.type | Article | - |
dc.subject.alternative | SMC Compression Molding | en |
dc.subject.alternative | Heat Transfer | en |
dc.subject.alternative | Flow | en |
dc.subject.alternative | Pressure | en |
dc.subject.alternative | Load | en |
dc.subject.alternative | Slab Method | en |
dc.type.rims | ART | - |
dc.citation.volume | 18 | - |
dc.citation.issue | 9 | - |
dc.citation.beginningpage | 2386 | - |
dc.citation.endingpage | 2395 | - |
dc.citation.publicationname | 대한기계학회논문집 A | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 임용택 | - |
dc.contributor.nonIdAuthor | 김기택 | - |
dc.contributor.nonIdAuthor | 정진호 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.