DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김수영 | ko |
dc.contributor.author | 임용택 | ko |
dc.date.accessioned | 2009-12-16T05:07:32Z | - |
dc.date.available | 2009-12-16T05:07:32Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1995-03 | - |
dc.identifier.citation | 소성가공, v.4, no.1, pp.39 - 47 | - |
dc.identifier.issn | 1225-696X | - |
dc.identifier.uri | http://hdl.handle.net/10203/15032 | - |
dc.description.abstract | The compression molding of SMC (sheet molding compund) at room temperature was analyzed based on rigid-viscoplastic approach by three dimensional finite element program. The developed program was tested by solving the three dimensional compression of wedge type specimens of aluminum alloys at various processing conditions. The simulation results were compared well to the experimental results available in the literature. based on this comparison the program was proved to be valid and was further applied in solving compression molding of SMC, which is a thermosetting material reinforced with chopped fiber glass. To investigate the effects of friction conditions and mold closing speeds for compression molding of SMC charge at room temperature, compressions of the cylindrical and rectangular shaped SMC were analyzed for various friction conditions and mold closing speeds. The calculated load values were compared to the experimental results for the compression molding of cylindrical specimen. | - |
dc.description.sponsorship | 본 연구는 상공자원부와 Cray 슈퍼컴퓨터사의 연구지원사업에 의해 수행된 것으로 이에 제위께 감사드린다. | en |
dc.language | Korean | - |
dc.language.iso | ko | en |
dc.publisher | 한국소성가공학회 | - |
dc.title | SMC 압축성형공정의 3차원 유한요소해석 | - |
dc.title.alternative | Three-Dimensional Finite Element Analysis of Compression Molding of Sheet Molding Compound | - |
dc.type | Article | - |
dc.subject.alternative | Finite Element Method | en |
dc.subject.alternative | Preferential Flow | en |
dc.subject.alternative | SMC(Sheet Molding Compound) | en |
dc.subject.alternative | Compression Molding | en |
dc.type.rims | ART | - |
dc.citation.volume | 4 | - |
dc.citation.issue | 1 | - |
dc.citation.beginningpage | 39 | - |
dc.citation.endingpage | 47 | - |
dc.citation.publicationname | 소성가공 | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | 임용택 | - |
dc.contributor.nonIdAuthor | 김수영 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.