DC Field | Value | Language |
---|---|---|
dc.contributor.author | 김기돈 | - |
dc.contributor.author | 정준호 | - |
dc.contributor.author | 양동열 | - |
dc.contributor.author | 박태권 | - |
dc.date.accessioned | 2013-03-16T23:18:38Z | - |
dc.date.available | 2013-03-16T23:18:38Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1999 | - |
dc.identifier.citation | 한국정밀공학회 99년 춘계학술대회, v., no., pp.375 - 379 | - |
dc.identifier.uri | http://hdl.handle.net/10203/137167 | - |
dc.description.abstract | The simulated die-casting process in which the traditional plaster casting process is combined with Rapid Prototyping technology is being used to produce AI, Mg, and Zn die-casting prototypes. Unlike in the die-casting process, molten metal in the conventional plaster casting process is fed via a gravity pour into a mold and the mold does not cool as quickly as a die-casting mold. The plaster castings have much larger and grosser grain structure as compared as the die-castings and the thin walls of the plaster mold cavity may not be completely filled. Because of lower mechanical properties induced by the large grain structure and incomplete filling, the conventional plaster casting process is not suitable for the trial die-casting process. In this work, an enhanced trial die-casting process has been developed in which molten metal in the plaster mold cavity is vibrated and pressurized simultaneously. Patterns for the casting are made by Rapid Prototyping technologies and then plaster molds, which have runner system, are made using these patterns. Imparted pressurized vibration to molten metal has made grain structure of castings much finer and improved fluidity of the molten metal enough to obtain complete filling at thin walls which can not be filled in the conventional plaster casting process. | - |
dc.language | KOR | - |
dc.publisher | 한국정밀공학회 | - |
dc.title | 쾌속조형을 이용한 다이 캐스팅 제품의 시작 공정 설계 및 제작 | - |
dc.title.alternative | Design and Development of Trial Die Casting Process by using Rapid Prototyping | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 375 | - |
dc.citation.endingpage | 379 | - |
dc.citation.publicationname | 한국정밀공학회 99년 춘계학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 김기돈 | - |
dc.contributor.nonIdAuthor | 정준호 | - |
dc.contributor.nonIdAuthor | 박태권 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.