DC Field | Value | Language |
---|---|---|
dc.contributor.author | 윤석준 | - |
dc.contributor.author | 양동열 | - |
dc.date.accessioned | 2013-03-16T23:17:26Z | - |
dc.date.available | 2013-03-16T23:17:26Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1999 | - |
dc.identifier.citation | 한국소성가공학회 1999년도 춘계학술대회, v., no., pp.18 - 21 | - |
dc.identifier.uri | http://hdl.handle.net/10203/137149 | - |
dc.description.abstract | In this study in order to make doubly-curved sheet metal effectively a sheet metal forming process has been developed by adopting the flexibility of the incremental forming process and the principle of bending deformation which causes slight deformation to thickness The developed process is an unconstrained forming process with no holder. For this study the experimental equipment is set up with the punch-set which consists of two pairs of lower support-punches and one upper center-punch. In the experiments using aluminum sheet it is found that the curvature of the formed sheet metal is determined by controlling the distance between supporting punches in pairs and the forming depth of the center-punch. and the edge-forming method is proposed for forming the sheet metal into the balanced shape. The equation using process variables such as the distance between supporting punches in pairs and the forming depth of the center-punch is proposed for the prediction of the radii of curvatures of the formed shape and it is corrected by the experimental results and the FEM simulation results about whether springback takes place. It is found that according o the simulation there is a certain set of the distance between a pair of supporting punches and the forming depth of the center-punch which causes a little springback. It is thus shown that the radii of curvatures of the formed sheet metal can be predicated by the corrected equation unless significant springback occurs. | - |
dc.language | KOR | - |
dc.publisher | 한국소성가공학회 | - |
dc.title | 이중 곡률을 갖는 판재의 성형 공정의 개발에 대한 실험적 연구 | - |
dc.title.alternative | Experimental Study on the Development of a Forming Process for Manufacturing Doubly-curved Sheet Metal | - |
dc.type | Conference | - |
dc.type.rims | CONF | - |
dc.citation.beginningpage | 18 | - |
dc.citation.endingpage | 21 | - |
dc.citation.publicationname | 한국소성가공학회 1999년도 춘계학술대회 | - |
dc.identifier.conferencecountry | South Korea | - |
dc.identifier.conferencecountry | South Korea | - |
dc.contributor.localauthor | 양동열 | - |
dc.contributor.nonIdAuthor | 윤석준 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.