| 1 | 2유체 분사기를 포트분사에 적용한 엔진 성능의 실험적 연구 강진석; 김승수; 최상민, 한국자동차공학회 춘계학술대회, pp.100 - 107, 한국자동차공학회, 1999 |
| 2 | 3-Dimensional Simulation of Air Mixing in the MSW Incinerators, Ryu, CK; Choi, Sangmin, SIWASTE, 1995 |
| 3 | A 2 ton/hr Pilot Plant of MSW Incinerator Choi, Sangmin; Ryu, C; Shin, D, International Symposium on Incineration and Flue Gas Treatment, 1997 |
| 4 | A Comparison Between an Air-Assisted Fuel Injector and a High Pressure Swirl Injector from the viewpoint of overall Sauter Mean Diameters with respect to Operating Conditions Jang, CS; Choi, Sangmin, ICLASS-Asia 2001, 2001 |
| 5 | A Microscopic Observation of the Internal Structure of Partly Reacted Montana Resebud Subbituminous Coal Particle Choi, Sangmin; Haussmann, G; Kruger, CH, The Western States Section The COmbustion Institute, 1985 |
| 6 | A Numerical Analysis of the Thermo-fluid Flow Change in a Blast furnace Due to Distribution of the burden Yang, K; Choi, Sangmin; Jung, J, KAIST-Kyushu Univ Workshop, 2008 |
| 7 | A Numerical Modeling of Temperature Distribution and Pressure Drop through the Layered Burden Loading in a Blast Furnace Yang, K; Choi, Sangmin; Chung, J, ASPACC, 2007 |
| 8 | A Numerical modelling of isothermal flow in the lower part of a blast furnace during change of cohesive zone Jin, H; Choi, Sangmin, ASPACC, 2009-05-24 |
| 9 | A Process Simulation Model for 2 ton/hr Incinerator Yang, W; Shin, D; Choi, Sangmin, The 16th International Conference on Incineration and Thermal Treatment echnologies, 1997 |
| 10 | A Research Proposal for the Performance Concept Modeling of an Oxy-coal Power Plant Lee, K; Choi, Sangmin; Kim, T, Univ. of MIchigan Student Symposium, 2008 |
| 11 | A Research Proposal for the Performance Modeling of an Oxy-coal fired Power Plant Lee, K; Kim, S; Choi, Sangmin; Kim, T, The 7th JSME-KSME Thermal and Fluids Engineering Conference, 2008 |
| 12 | A Simplified Model of Coal Gasifier for IGCC plant Park, J; Lee, H; Choi, Sangmin; Kim, B; Ryu, J, JSME-KSME Thermal and Fluids Engineering Conference, 2008 |
| 13 | A Soild Fuel Combustion Model For The Layered Burden Loading In A Blast Furanace Yang, K; Choi, Sangmin; Jung, J, 32nd International Symposium on combustion, 2008 |
| 14 | An Experience of the Oxygen-enriched Combustion in a Full-scale Incinerator Yang, Won; Choi, Sangmin; Lee, Kichul; Han, Inho, International Conference on Incineration & Thermal Treatment Technologies, 2002 |
| 15 | An experimental and numerical simulation on the uneven flow distribution in the windbox of an oil-fired boiler Go, YG; Kim, YZ; Choi, Sangmin, 6th KSME-JSME Thermal and fluids engineering conference, pp.0 - 0, 2005-03 |
| 16 | An Experimental Investigation of Early Stages of Pulverized Coal Combustion - Enhanced Devolatilization in an Oxidizing Environment Choi, Sangmin; Kruger, CH, International Conference on Coal Science, 1989 |
| 17 | An Overview of R&D Activities of USC, IGCC, and Oxy-fuel Combustion Activities in Korea Choi, Sangmin; Kim, Jong Jin; Kim, Jongsoo, Japan-Korea EnergySymposiumin Karatsu, 2007 |
| 18 | An overview of Reseatch and Development Activities of USC, IGCC, and Oxy-fuel Combustion in Korea Choi, Sangmin; Kim, JongJin; Kim, J, ICOPE-2007, 2007 |
| 19 | Analysis of Pasir Coals for Use in Utility Boilers Shin, YS; KIm, JS; Choi, Sangmin, 6th U.S. - Korea Coal Ulilization Workshop, 1991 |
| 20 | Analysis of the blast furnace process using general purpose simulation code Jin, H; Choi, Sangmin, TIT-KAIST symposium, 2007 |
| 21 | Application of a Wide Range Oxygen Sensor for the Misfire Detection Chung, Y; Bae, S; Choi, Sangmin, International Spring Fuels % Lubricants Meeting & Exposition, 1999 |
| 22 | Application of Solid Bed Combustion Models Choi, Sangmin, Forty-Fifth Symposium(Japanese) on Combustion, 2007 |
| 23 | Bed Combustion ina Furnace Enclosure - A Model for the MSW Incinerator Ryu, C; Shin, D; Choi, Sangmin, ASPACC 2001 (The Third Asia-Pacific Conference on Combustion), pp.351 - 354, 2001 |
| 24 | Behavior of Pulverized Montana Rosebud Subbituminous Coal during the Early Stages of Combustion Choi, Sangmin; Kruger, CH, Plenary Paper, 1986 |
| 25 | CFD Evaluation of the Effects of Internal Flow on Spray Characteristics of High Pressure Swirl Injectors Jang, C; Choi, Sangmin, ICLASS 2000, 2000 |
| 26 | Characteristics of Rotating Flows by Image Processing of Flow Visualization Choi, Sangmin; Kim, JW; Hyun, JM, Fluids Engineering Seminar, 1989 |
| 27 | Characterization of Coal Properties through Observation of Single Particle Flames Kim, JS; Shin, YS; Hong, SE; Choi, Sangmin, 2nd International Coal Conference, 1991 |
| 28 | Characterization of Coal Properties through Observation of Single Particle Flames Choi, Sangmin; Shin, YS; Kim, JS, 2nd KSME-JSME Thermal Engineering Conference, 1992 |
| 29 | Characterization of SIngle Coal Particle Flames Choi, Sangmin, The 7th Korea-U.S. Coal Utilization Workshop, 1992 |
| 30 | Coking Pressure Estimation Using a Simple Plastic Layer Model in a Coke Oven Park, J; Yang, K; Choi, Sangmin, ASPACC, 2007 |
| 31 | Cold-Flow Simulation of Municial Waste Incinerators Choi, Sangmin; Lee, Jong Suk; Kim, Soong Kee; Shin, Dong Hoon, 25th Symposium on Combustion/The Combustion Institute, 1994 |
| 32 | Combined Bed Combustion and Gas Flow Simulation for a Grate Type Incinerator Ryu, C; Shin, D; Choi, Sangmin, 4th JSME-KSME Thermal Engineering Conference, 2000 |
| 33 | Combined Bed Comsbution and Gas Flow Simulation of MSW Incienrators Ryu, C; Shin, D; Choi, Sangmin, JSME-KSME Thermal Engineeing Conference, 2000 |
| 34 | Combustion Behavior of Bed of Solid Fuel Particles _ A Simulation Modle for the Bed Combustion in Mass-Burn Solid Waste Incinerators Shin, D; Ryu, C; Min, J; Choi, Sangmin, The 27th Symposium (International) on Combustion, 1998 |
| 35 | Combustion characteristics of waste fuels in a fluidized bed and effects of operating conditions Choi, Jinhwan; Lee, Sangdeuk; Choi, Sangmin, The 29th International Symposium on Combustion, 2002 |
| 36 | Combustion Modeling in an Iron Ore Sintering Bed Yang, Won; Ryu, Changkook; Choi, Sangmin, International symposium on coal combustion, 2003-08-18 |
| 37 | Combustion Modeling of Solid Beds - A Unified Approach Yang, Won; Choi, Sangmin; Ryu, Changkook, 30th International Symposium on Combustion, 2004 |
| 38 | Combustion Studies in Waste Incineration Choi, Sangmin, 2002 ICIPEC, pp.111 -, 2002 |
| 39 | Comparative Ecaluation of Oxy-Coal Power Generation Systems Lee, K; Kim, S; Choi, Sangmin; Kim, T, ICOPE, 2009-11-16 |
| 40 | Comparative Evaluation of Gasification/Melting Processes for Municipal Solid Waste Treatment Kim, T; Yang, W; Choi, Sangmin, ICIPEC, pp.0 - 0, 2006-09 |
| 41 | Comparative Evaluation of Municipal Solid Waste Incinerator Designs by Flow Simulation, Kim, SK; Shin, DH; Lee, JS; Choi, Sangmin, The Third JSME-KSME Fluids Engineering Conference, 1994 |
| 42 | Comparison of Overall Performance between an Air-assisted Fuel Injector and a High Pressure Swirl Injector Jang, C; Choi, Sangmin, ICLASS 2000, 2000 |
| 43 | Computational Fluid Dynamics Evaluation of Good Combustion Performance in Waste Incinerators Shin, D; Ryu, C; Choi, Sangmin, Fifth International Conference on Technologies and COmbustion for a Clean Environment, pp.353-357 -, 1999 |
| 44 | Computational Simulation of Asymmetric Combustion Conditions Induce by Uneven Combustion Air Supply in a Power Plant Oil Burner Go, Y; Choi, Sangmin, ICOPE -2007, 2007 |
| 45 | Cross-Sectional Spray Patternation of an Air Blast Atomized Liquid Jet Injected into a Cross Flow Leong, May; Vince, McDonell; Scott, Samuelsen; Choi, Sangmin; Shin, Donghoon, International COnference on Liquid Atomization and Spray Systems, pp.294 - 301, 1997 |
| 46 | Crust Formation and Its Effect on Heat Transfer in the MOlten Metal Pool Park, RJ; Kim, SB; Kim, HD; Choi, Sangmin, International Meeting on Advanced Reactor Safety88, 1997 |
| 47 | Design and Performance Parameters of Gasification/Melting Process Kim, T; Choi, Sangmin; Yang, W, Asia-Pacific Conference on Combustion, 2007 |
| 48 | Design consideration for the cross jet air mixing in the municipal solid waste incinerators Ryu Chang Kook; Choi, Sangmin, Proceedings of the 1995 ASME International Mechanical Engineering Congress and Exposition, pp.205 - 212, 1995-11-12 |
| 49 | Detection of Misfired Gas Flow in the Echaust Manifold Chung, Y; Bae, S; Choi, Sangmin; Yoon, K, The 15th Internal Combustion Engine Symposium (International), 1999 |
| 50 | Devolatilization of solid waste particles and combustion of volatiles in a fluidized bed : Modeling and experimental validation Jinhwan Choi; Lee, Sangdeuk; Choi, Sangmin, International Conference on Incineration, Combustion/ Pyrolysis and Emission Control(ICIPEC, 2002 |
| 51 | Effect of moisuture content of wood and RDF in a fluidized bed Kim, T; Choi, Sangmin, TokyoTech-KAIST Joint workshop for Mechnical Engineering Students, 2007 |
| 52 | Effect of partical oxidation of wood and RDF in a fluidized bed Kim, T; Choi, Sangmin, China-Japabn-Korea Student Symposium, 2007 |
| 53 | Engineering Design, Evaluation and Troubleshooting of Waste Incinerators Choi, Sangmin, Waste SYmposium 2003, 2003 |
| 54 | Evaluation of Pyrometric Temperature Measurement Techniques From Broad Band Thermal Radiation Choi, Sangmin, The Third ASME-JSME Thermal Engineering Conference, 1991 |
| 55 | Experimental study of effects of axi-asymmetric combustions air supply on temperature distribution inside oil-fired burner and furnace GO, Y; Yang, W; Choi, Sangmin, ASPACC 2009, 2009-05-24 |
| 56 | Gas Flows through the Inter-Ring Crevice and Their Influence on UHC Emissions - SAE Technical Paper 1999-01-1533 Kim, C; Bae, C; Choi, Sangmin, International Spring Fuels & Lubricants Meeting & Expositions, 1999 |
| 57 | Improvement of Operatinf Conditions in Waste Incinerators using Engineering Tools Choi, Sangmin; Yang, Won; Nam, Hyungsik, ICIPEC, 2004 |
| 58 | Influence of Coal Kinetic Characteristics on IGCC Gasifier Efficiency Lee, Hookyung; Choi, Sangmin; Paek, Minsu, ICOPE, 2009 |
| 59 | Influence of Operatuion Parameters on PCDD/F Emission of MSW Incinerators Choi, J; Shin, D; Choi, Sangmin, Second International Symposium on Incineration and FLue Gas Treatment Technologies, 1999 |
| 60 | Interface between Two Immerscible Fluids in an Impulsively rotating Cylinder Choi, Sangmin; Im, TG; Hyun, JM, 4 ISROMAC, 1992 |
