Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Kim, SH

Showing results 1 to 23 of 23

1
A knowledge-based expert system for roll pass and profile design for shape rolling of round and square bars

Kim, SH; Im, Yong-Taek, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.90Special, no.SI, pp.145 - 151, 1999-05

2
A study on the development of transmission-type extrinsic Fabry-Perot interferometric optical fiber sensor

Kim, SH; Lee, Jungju; Lee, DC; Kwon, IB, JOURNAL OF LIGHTWAVE TECHNOLOGY, v.17, no.10, pp.1869 - 1874, 1999-10

3
Application of point and distributed optical fiber sensors to health monitoring of smart structures

Kim, SH; Lee, Jungju; Seo, DC; Lim, JO, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, v.17, no.8-9, pp.1368 - 1373, 2003-04

4
Assessment of material damage at high temperatures by measurement of damage process zone

Lee, Soon-Bok; Bae, Keun-Ho; Lee, Keum-Oh; Jung, YU; Kim, SH, Fatigue Damage of Structural Materials VII, 2008

5
Construction of sliding constraint surfaces and initial guess shapes for intermediate steps in multi-step finite element inverse analysis

Kim, SH; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.130, no.SI, pp.482 - 489, 2002-12

6
Design of 4 Joints 3 Links Biped Robot and Its Gaits

Kim, SH; Oh, Jun-Ho, 1st International Workshop on Human-friendly Welfare Robotic Systems, pp.115 - 120, 2000

7
Design of four joints and three links biped robot and its gaits

Kim, SH; Oh, Jun-Ho; Lee, KH, International Conference on intelligent Robots and Systems, pp.295 - 300, IAS, 2000-07

8
Dynamic Analysis of a Helical Spring (Extended Numerical Analysis)

Kim, SH; Park, Youn-sik, APVC '93, pp.1498 - 1503, 1993-11

9
Dynamic Characterization of Foam Materials and Its Application to Modeling of Automotive Seat-Passenger System

Chae, CK; Song, S; Kim, Kwang-joon; Jang, HK; Kim, SH; Cho, YH, Submitted to 2001 SAE Noise and Vibration Conference and Exposition, pp.0 - 0, 2001

10
Finite element analysis of diaphragm-type air springs with fiber-reinforced rubber composites

Lee, HW; Kim, SH; Huh, Hoon; Kim, JY; Jeong, SG, JOURNAL OF COMPOSITE MATERIALS, v.37, no.14, pp.1261 - 1274, 2003

11
Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio

Kim, SH; Huh, Hoon, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, v.113, no.1-3, pp.779 - 785, 2001-06

12
Hygroscopic growth of E-coli and B-subtilis bioaerosols

Lee, BU; Kim, SH; Kim, Sang Soo, JOURNAL OF AEROSOL SCIENCE, v.33, no.12, pp.1721 - 1723, 2002-12

13
Hygroscopicity of E.coli and B.subtilis Bioaerosols

Lee, BU; Kim, SH; Kim, Sang Soo, the 6th International Aerosol Conference, The International Aerosol Conference, 2002-09-08

14
Intensity-modulated multiplexing of fiber Bragg grating sensors

Seo, JM; Kim, SH; Kwon, IB; Lee, Jungju; Yoon, DJ, SMART MATERIALS STRUCTURES, v.14, no.1, pp.177 - 182, 2005-02

15
Inverse finite element analysis of S-Rail forming with a direct mesh mapping method for crash analysis considering forming effects

Kim, SH; Huh, Hoon, ENGINEERING PLASTICITY FROM MACROSCALE TO NANOSCALE PTS 1 AND 2 BOOK SERIES: KEY ENGINEERING MATERIALS, v.233-2, pp.335 - 340, 2003

16
Optimum finite element for simulation of elasto-plastic bending of sheet metal

Kim, SH; Huh, Hoon, METALS AND MATERIALS-KOREA, v.4, no.4, pp.685 - 694, 1998

17
Parameter design of signal processing for transmission/reflection-type hybrid extrinsic Fabry-Perot optical fiber sensors

Kim, SH; Lee, Jungju, SMART MATERIALS STRUCTURES, v.14, no.1, pp.183 - 190, 2005-02

18
Phase-shifted transmission/reflection-type hybrid extrinsic Fabry-Perot interferometric optical fiber sensors

Kim, SH; Lee, Jungju, JOURNAL OF LIGHTWAVE TECHNOLOGY, v.21, no.3, pp.797 - 804, 2003-03

19
Signal processing algorithm for transmission-type Fabry-Perot interferometric optical fiber sensor

Kim, SH; Lee, Jungju; Kwon, Dong-Soo, SMART MATERIALS STRUCTURES, v.10, no.4, pp.736 - 742, 2001-08

20
Stress evaluation with numerical integration schemes in finite element analysis of elasto-plastic bending

Huh, Hoon; Kim, SH, COMMUNICATIONS IN NUMERICAL METHODS IN ENGINEERING, v.16, no.11, pp.755 - 767, 2000-11

21
Structural health monitoring of composite laminates by using embedded FBG optical fiber sensors

Kim, WS; Kim, SH; Lee, Jungju, ADVANCES IN FRACTURE AND STRENGTH, PTS 1- 4 BOOK SERIES: KEY ENGINEERING MATERIALS, v.297-300, pp.1 - 4, 2005

22
The KSTAR project: An advanced steady state superconducting tokamak experiment

Lee, GS; Kim, J; Hwang, SM; Chang, Choong-Seock; Chang, Hong-Young; Cho, MH; Choi, BH; et al, NUCLEAR FUSION, v.40, pp.575 - 582, 2000-03

23
Tool design in a multi-stage drawing and ironing process of a rectangular cup with a large aspect ratio using finite element analysis

Kim, SH; Kim, SH; Huh, Hoon, INTERNATIONAL JOURNAL OF MACHINE TOOLS MANUFACTURE, v.42, no.7, pp.863 - 875, 2002-05

rss_1.0 rss_2.0 atom_1.0