Browse "Dept. of Mechanical Engineering(기계공학과)" by Author Chung, Myung-Kyoon

Showing results 54 to 113 of 124

54
Water to water heat pump 시뮬레이션 = Water to water heat pump simulationlink

이기방; Lee, Ki-Bang; et al, 한국과학기술원, 1987

55
경계층 천이 현상을 계산하기 위한 난류 모형의 개발 = Development of k-ε model for prediction of transitional boundary-layer flowslink

백성구; Baek, Seong-Gu; et al, 한국과학기술원, 2002

56
경계층내에서의 천이 모형을 위한 연구 = A study for modelling of laminar to turbulent transition in the boundary layerslink

백성구; Baek, Seong-Gu; 성형진; 정명균; et al, 한국과학기술원, 1997

57
고온 연료전지 모듈 및 시스템 개발 = Development of high temperature fuel cell modules and systemslink

김영진; Kim, Young-Jin; et al, 한국과학기술원, 2011

58
고체입자가 부상된 이상난류유동의 해석을 위한 입자궤적모델의 연구 = Trajectory model approach to the analysis of gas-particles two-phase turbulent flowslink

팽기석; Pang, Ki-Seok; et al, 한국과학기술원, 1988

59
곡률수정 2-방정식을 이용한 확대 축소관내의 난류유동 특성의 수치적 연구 = Numerical prediction of turbulent recirculating flow using curvature dependent two-equation modellink

장호철; Jang, Ho-Cheol; et al, 한국과학기술원, 1989

60
관 유동과 Blasius 유동에서 가장 불안정한 교란에 관하여

Chung, Myung-Kyoon; Choi, Sang-Kyu, 대한기계학회 논문집B, v.27, no.6, pp.766 - 772, 2003-06

61
관 입구 영역에서의 층류유동 해석 = A study on fluid flow over the entrance region of a tubelink

김병용; Kim, Byung-Yong; et al, 한국과학기술원, 1980

62
균일전단류가 2차원 곡률 Duct에 유입될 때의 난류유동 특성에 대한 실험적 연구 = Experimental study on the tubulent characteristics of 2-D curved duct flow with inlet uniform shear ratelink

임효재; Im, Hyo-Jae; et al, 한국과학기술원, 1989

63
균일전단류에 잠긴 원통표면의 압력 및 전단력 분포 = Pressure and skin friction distributions around a circular cylinder immersed in a uniform shear flowlink

변철웅; Byun, Cheol-Woong; et al, 한국과학기술원, 1983

64
난류 경계층내의 선형열원으로부터의 열확산 예측을 위한 난류모형 연구 = A study on turbulence models for prediction of heat dispersion from an elevated line source in a turbulent boundary layerlink

조중원; Cho, Chung-Won; et al, 한국과학기술원, 1999

65
난류 동축 제트의 초기 영역에 대한 연구 = A study on the initial region of turbulent coaxial jetslink

이동인; Lee, Dong-In; et al, 한국과학기술원, 1981

66
난류 동축(同軸) 제트의 구조에 관한 연구 = Study on the structure of turbulent coaxial jetslink

전광민; Chun, Kwang-Min; et al, 한국과학기술원, 1980

67
난류 열대류에 대한 실험적 연구 = Experimental study of turbulent thermal convectionlink

정재욱; Cheong, Jae-Wook; et al, 한국과학기술원, 1992

68
난류수송에 관련된 시간척도의 비등방성에 관한 연구 = Study on the anisotropy of turbulent transport time-scalelink

조중원; Cho, Choog-Won; et al, 한국과학기술원, 2005

69
난류유동장과 관집합체 내에서 진동하는 실린더 사이의 상호공진 = Resonant interaction between turbulent flow field and a vibrating cylinder in a tube banklink

홍신표; Hong, Sin-Pyo; et al, 한국과학기술원, 1985

70
단부 과도금 원인해소를 위한 단부 와류유동과 Marangoni 대류 분석 = Analysis of vortex structure in the vicinity of strip edge and marangoni convection in order to overcome edge over coatinglink

김상준; Kim, Sang-Joon; et al, 한국과학기술원, 2003

71
동축 코안다 제트의 초기 영역에 대한 실험적 연구 = An experimental investigation of initial region of the coaxial coanda jetlink

박호동; Park, Ho-Dong; et al, 한국과학기술원, 1984

72
마이크로콤퓨터를 응용한 온라인 측정 시스템 = Microcomputer-aided on-line measurement systemlink

이정운; Lee, Jeong-Woon; et al, 한국과학기술원, 1981

73
벽면경계 난류유동에 대한 κ-ε-γ 난류모형의 개발 = Development of κ-ε-γ turbulence model for wall-bounded turbulent shear flowslink

조명종; Cho, Myeong-Jong; et al, 한국과학기술원, 1992

74
벽면과 평행하게 분출하는 2차원 벽부착 제트 유동의 난류 유동 특성 = Investigation on the turbulence structure of a wall-attaching offset jetlink

윤순현; Yoon, Soon-Hyun; et al, 한국과학기술원, 1991

75
볼류트 펌프 설계 프로그램 개발을 위한 설계 변수 및 설계 기법에 관한 연구 = Study for design variables and design algorithm to develop a volute pump design programlink

유기수; Yoo, Ki-Soo; et al, 한국과학기술원, 2008

76
부력의 영향을 받는 수평경계층 유동에 대한 4-방정식 난류모델의 해석 = Four-equation turbulence model for prediction of the turbulent boundary layer affected by buoyancy force over a flat plate ;link

성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 1984

77
불안정 곡선난류유동의 계산을 위한 곡률의존 2-방정식모델의 확장 = Extention of curvature dependent 2-equation model for computation of unstably curved turbulent flowslink

조규식; Cho, Gyu-Sik; et al, 한국과학기술원, 1993

78
수분흡수가 가스터빈 엔진성능에 미치는 영향에 대한 연구 = A study on the effects of water ingestion on the performance of gas turbine engineslink

이도형; Lee, Doh-Hyoung; et al, 한국과학기술원, 1998

79
수직 벽 위를 지나는 박리 및 재부착 비압축성 난류유동 에서의 열전달 연구 = Heat transfer in separated and reattached incompresible turbulent flow past a single vertical fencelink

김경천; Kim, Kyung-Chun; et al, 한국과학기술원, 1981

80
수치적 방법에 의한 두 평판 사이의 난류 열대류의 해석 = Numerical analysis of turbulent thermal convection between two flat plateslink

이장희; Lee, Jang-Hee; et al, 한국과학기술원, 1984

81
수치적 방법에 의한 두 평판 사이의 난류 열대류의 해석 = Numerical analysis of turbulent thermal convection between two flat plateslink

이원근; Lee, Won-Geun; et al, 한국과학기술원, 1990

82
수평 평판사이의 난류 열대류에 대한 실험적 연구 = Experimental study of turbulent thermal convection between horizontal plateslink

박주엽; Park, Ju-Yeop; et al, 한국과학기술원, 1993

83
수평 평판의 온도가 계단적으로 변할 때의 난류 경계층 계산 = Calculation of turbulent boundary layer of a step change in surface temperaturelink

정동현; Chung, Dong-Hyun; et al, 한국과학기술원, 1987

84
싸이크론 집진기에 있어서의 유동과 성능에 관한 연구 = An experimental study on flow field and performance of the cyclone separatorlink

윤의수; Yoon, Eui-Soo; et al, 한국과학기술원, 1983

85
아연도금 강판의 체크마크 무늬를 발생하지 않는 에어나이프 시스템 개발 = Development of a novel air-knife system that prevents the check-mark stain on the galvanized steel striplink

윤현기; Yoon, Hyun-Gi; et al, 한국과학기술원, 2010

86
압축성 근처 후류 해석을 위한 난류 모형의 비교 = Comparison of turbulence models for compressible near-wake flowlink

김성훈; Kim, Seong-Hoon; et al, 한국과학기술원, 1995

87
얇은 환상 제트 및 동축 제트에 미치는 코안다 효과에 대한 실험적 고찰 = An experimental investigation of coanda effect on the annular jet and the coaxial jetlink

방세윤; Bang, Se-Yoon; et al, 한국과학기술원, 1983

88
연속 용융 아연도금 공정에서의 단부 과도금 현상에 대한 수치해석 = Numerical analysis of edge overcoating in continuous Hot-Dip galvanizinglink

안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2002

89
연속식 용융아연 도금공정에서의 단부 과도금 현상에 대한 수치해석

Chung, Myung-Kyoon; 안기장; 김상준; 조중원, 대한기계학회 논문집B, v.28, no.7, pp.763 - 770, 2004-07

90
연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink

안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006

91
열펌프 건조기의 최적 운전 조건 = Optimum operating conditions of heat pump dryerlink

김승태; Kim, Seung-Tae; et al, 한국과학기술원, 1986

92
열펌프 장치의 성능특성에 관한 실험적 연구 = An experimental study on the characteristics of heat pump systemlink

정태건; Jeong, Tae-Gun; et al, 한국과학기술원, 1983

93
원관내 열전달을 증가시키기 위한 난류강화기구에 대한 수치적 연구 = Numerical analysis of turbulent promoter for augmenting heat transfer within pipelink

김숙관; Kim, Sook-Kwan; et al, 한국과학기술원, 1990

94
원심 압축기의 성능 해석을 위한 손실 모델에 대한 연구 = Study on loss models for centrifugal compressor performance analysislink

오형우; Oh, Hyoung-Woo; et al, 한국과학기술원, 1994

95
원심 임펠러의 내부 유동장에 근거한 이론적인 미끄럼 계수와 최적 디퓨저 설계 절차의 개발 = An analytical slip factor based on an internal flow field for centrifugal impellers and development of optimum design procedure for diffuserlink

팽기석; Paeng, Kee-Seok; et al, 한국과학기술원, 2001

96
원심압축기 설계에 관한 기초연구 = A preliminary study on the design of a centrifugal compressorlink

박성구; Park, Seong-Koo; et al, 한국과학기술원, 1988

97
원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink

오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006

98
원통면을 지나는 두 대칭 곡면벽 제트류의 상호작용 = Interaction of two symmetric curved wall jets passed a circular cylinderlink

권동수; Kwon, Dong-Soo; et al, 한국과학기술원, 1982

99
원형제트의 간헐도 측정연구 = Measurement of intermittency in a turbulent round jetlink

김승기; Kim, Soong-Ki; et al, 한국과학기술원, 1988

100
유선 곡률과 균일전단류가 상호작용을 하는 난류유동에 관한 실험적 연구 = An experimental study on the interaction of uniform shear with streamline curvaturelink

이종훈; Lee, Jong-Hun; et al, 한국과학기술원, 1990

101
유선곡률과 균일전단에 의한 난류생성의 상호작용에 관한 실험적 연구 = An experimental investigation of the interactive turbulence production between streamline curvature and uniform shearlink

임효재; Lim, Hyo-Jae; et al, 한국과학기술원, 1995

102
유한개의 원형관 다발 내에서 진동하는 원형관과 난류유동장의 상호작용에 관한 연구 = Relation between turbulent flow field and a vibrating tube in a finite tube banklink

정찬호; Chong, Chan-Ho; et al, 한국과학기술원, 1986

103
이차원 표면 온배수의 비정상 난류 열확산에 관한 수치적 연구 = Numerical prediction of unsteady turbulent thermal diffusion of surface jets by use of buoyancy-modified κ-ε model of turbulencelink

송인용; Song, In-Yong; et al, 한국과학기술원, 1990

104
재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink

최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013

105
전기 화학 반응을 고려한 고체 산화물 연료 전지의 성능 해석 = The analysis of heat and fluid flow in solid oxide fuel cell with electrochemical reactionlink

김영진; Kim, Young-Jin; et al, 한국과학기술원, 2005

106
전단층 유동의 안정 및 준안정 해석 = Spectra and pseudospectra of shear flowslink

최상규; Choi, Sang-Kyu; et al, 한국과학기술원, 2003

107
전자기유량계의 특성 평가를 위한 자기장과 유동장의 실험 및 수치해석 = An experimental and numerical analysis of electromagnetic and flow fields for characterization of an electromagnetic flowmeterlink

임기원; Lim, Ki-Won; et al, 한국과학기술원, 1998

108
정규 격자계를 이용한 2차원 날개단면 주위의 비압축성 난류유동의 수치해석 = Numerical analysis of incompressible turbulent flows over a two-dimensional airfoil using a regular grid systemlink

김기섭; Kim, Ki-Sup; et al, 한국과학기술원, 1995

109
정상 및 비정상운전시 원심펌프성능해석을 위한 손실모델에 대한 연구 = Study on loss models for centrifugal pump performance analysis during normal & abnormal operationlink

정장규; Chung, Chang-Kyu; et al, 한국과학기술원, 1995

110
조도가 후방계단 뒤 난류 유동 구조에 미치는 영향에대한 실험적 연구 = An experimental study of roughness effects on the turbulent flow structure downstream of a backward-facing steplink

김병남; Kim, Byung-Nam; et al, 한국과학기술원, 1991

111
천연가스연소 보일러에서 배가스 재순환이 NOx와 CO 배출에 미치는 영향에 대한 실험적 연구 = An experimental study on the effects of FGR on NOx and CO emission in LNG-fired boilerlink

고석민; Ko, Seock-Min; 정명균; 성형진; et al, 한국과학기술원, 2001

112
초기난류특성이 2차원 난류평면제트의 전개에 미치는 영향 = Effect of initial turbulent characteristics on evolution of two-dimensional turbulent plane jetlink

이계복; Lee, Gye-Bok; et al, 한국과학기술원, 1983

113
초음속 과소 팽창 난류 제트의 해석을 위한 기초연구 = Basic analysis of the supersonic underexpanded turbulent jetslink

윤병국; Yun, Byung-Kook; et al, 한국과학기술원, 1990

rss_1.0 rss_2.0 atom_1.0