Browse "Dept. of Mechanical Engineering(기계공학과)" by Author 596

Showing results 156 to 191 of 191

156
Rapid measurement of Step height using Confocal Differential Heterodyne Interferometry with Beam Scanning Method

Gweon, Dae-Gab; Cheol Song; Tae Joong Kim; Hyung Suck Cho, ISNM2005, The 3rd International Symposium on Nanomanufacturing, 2005-11-05

157
Real-Time Control Using Explicit Dynamic Solutions of a Two-Motion-Modes Mobile Robot

Cha, y.y.; Gweon, Dae-Gab, Proceedings of the Institution of Mechanical Engineers, v.208, pp.157 - 167, 1994-08

158
Real-Time Joint Torque Minimization using Neural Network for a Quadraped Walking Robot

Kim, S.M.; Gweon, Dae-Gab; Chung, T.J., Proceedings of the 1st International Workshop on Advanced Machatronics, pp.141 - 148, 1995

159
Sharper Edge Image in Confocal Self-Interference Microscopy

Gweon, Dae-Gab, KAIST-NMIJ Joint Workshop 2006 on Precision Metrology, 2006-12-21

160
Signal increasing method in confocal scanning microscopy in fluorescent mode using curved mirror

Kang, D.K.; Seo, J.W.; Gweon, Dae-Gab, International conference on control, Automation and Systems 2001, 2001-10

161
Simultaneous acquisition of Confocal Fluorescence and Raman image from a Fluorescence-stained cell

Gweon, Dae-Gab, Focus on Microscopy 2007, 2007-04-10

162
Simultaneous improvement of lateral and axial resolution of structured illumination confocal scanning microscopy

Kim, TJ; Gweon, Dae-Gab, Focus on Microscopy 2008, 2008-04-13

163
Structured illumination confocal scanning microscope with enhanced optical resolution and acquisition speed

Kim, Young Duk; Ahn, MyoungKi; Gweon, Dae-Gab, SPIE Photonics West 2012, 2012-01-22

164
Study for confocal laser scanning microscopy in the skin

Gweon, Dae-Gab, Stratum V Corneum, 2007-07-11

165
The alignment optical system for the soft x-ray microscope with zone plate

Gweon, Dae-Gab; HongKi Yoo; DongWoo Kang; GweonHa Yoon, EUspen 4th international conference 6th annual general meeting, pp.426 - 427, 2004

166
The Calibration of tilting and reflective index of specimen in confocal scanning microscopy

Seo, J-W; Park, S-L; Oh, H-Y; Lee, J-H; Gweon, Dae-Gab, Annual Meeting of American Society for Precision Engineering, pp.279 - 281, 1999-06

167
The conceptual design of xytheta fine stage and its optimal design to obtain fast response in lithography system

Gweon, Dae-Gab, International conference on control, Automation and Systems 2001, 2001-10

168
The Design of High Precision X-Y-Theta Stage Using VCM

Kim, D; Kim, K; Gweon, Dae-Gab; Lee, SW; Choi, Wo, EUspen 4th international conference, 2004-05-31

169
The effect of the stereo focus technique on the three dimensional imagin in the confocal scanning microscopy

Lee, S.Q.; Moon, K,S,; Gweon, Dae-Gab, Euspen 2nd international conference, pp.448 - 449, 2001-05

170
The time optimal control of one servo actuator with long stroke and highprecision

Lee, S. Q.; Kim,Y. S.; Gweon, Dae-Gab, ASPE Annual Meeting, pp.295 - 298, 1998-10

171
Thin, Light-weight, Compact Pickup Actuator for High Precision, Fast Access CD-ROM Devices

Kim, S.M.; Gweon, Dae-Gab, ASPE Annual Meeting, pp.337 - 340, 1997

172
Tilt acutuator for DVD player and its magnetic spring effect

Lee, M.G.; Kim, K.H.; Lee, K.C.; Lee, C.W.; Gweon, Dae-Gab, OSA annual meeting/ILSXYII, pp.77 - 77, 2001-10

173
Tolerance Allocation and Alignment of Focusing Unit for Near Field Recording System

Lee, J. H.; Gweon, Dae-Gab; Jin, D. K.; Yoon, K.; Jeong, J., EUspen 4th international conference, 2004-05-31

174
Tolerance analysis and compensation for focusing unit of near field recording system

Lee, J.H.; Yoon, H.K.; Jung, J.W.; Oh, H.R.; Gweon, Dae-Gab, International symposium on optical, pp.111 - 113, 2002-07-08

175
Ultraprecision XY stage with millimeter travel range using leaf-spring mechanism and voice-coil motor

Kang, D. W; Kim, D. M; Kim, K. H.; Shim, J. Y.; Gweon, Dae-Gab, ASPE 2003 Anual meeting, 2003-10-30

176
Vibration analysis of Atomic Force Microscopy

Gweon Dae Gab, Proceeding of the Korean Society for Noise and Vibration Engineering, 2000-09

177
Voice Coil Motor with Multisegmented Magnet array in Rotating Disk Drive

Jeong, J; Lee, JH; Yoon, HK; Gweon, Dae-Gab; YM, The 1st International Conference on Manufacturing, Machine Design and Tribology, 2005-06-24

178
Waveform determination and positioning control of the nanoslider with inertial sliding and stick-positioining

Shim, JY; Gweon, Dae-Gab, ASPE 2003 Anual meeting, pp.171 - 174, 2003-10-30

179
X선을 이용한 PCB 장착 상태 검사 알고리듬 개발

오형렬; 권대갑, 대한기계학회 춘추학술대회 , pp.785 - 789, 대한기계학회, 1994

180
고속 초정밀 장행정용 이중 서보 시스템의 고속 세틀링을 위한 모드 변경 제어 기법

김정재; 최영만; 김기현; 권대갑; 홍동표, 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표, pp.145 - 149, 한국반도체및디스플레이장비학회, 2006

181
공초점 자가 간섭 현미경을 이용한 분해능 향상

강동균; 권대갑, 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표, pp.1 - 4, 한국반도체및디스플레이장비학회, 2006

182
공초점 주사 현미경에서 고속, 고품질 3차원 영상복원을 위한 최적조건

김태훈; 김태중; 권대갑, 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 , pp.1 - 4, 한국반도체및디스플레이장비학회, 2006

183
근접장 기록 장치의 트랙 추적 구동기의 설계

김기현; 이문구; 정회원; 정재화; 권대갑, 한국소음진동공학회 추계학술대회, pp.748 - 753, 한국소음진동공학회, 2001

184
나노 정밀도 스캐닝 용 공기베어링과 보이스 코일 모터의 초정밀 이중 스테이지 설계 및 제어

김기현; 최영만; 김정재; 이문구; 이석원; 권대갑, 한국정밀공학회 2005년도 춘계학술대회 , pp.1883 - 1885, 한국정밀공학회, 2005

185
빠른 정착시간과 정밀 위치제어를 위한 대행정 초정밀 시스템의 모드 변경 제어 기법

김정재; 최영만; 권대갑, 2005 한국자동제어학술회의, pp.237 - 242, 2005-10-20

186
원자 현미경용 샘플 스캐너의 개발

이동연; 이무연; 권대갑, 한국소음진동공학회 추계학술대회, pp.879 - 882, 한국소음진동공학회, 2005

187
원자현미경용 XY 스캐너의 아베 오차 최소화를 위한 최적 설계 및 원자 현미경의 측정 불확도 평가

권대갑; 김동민; 이동연, 한국정밀공학회 2005년도 춘계학술대회 , pp.1438 - 1441, 한국정밀공학회, 2005

188
이동로봇을 위한 실시간 항법 알고리즘

차영업; 권대갑, 대한기계학회 춘추학술대회, v.1, no.1, pp.746 - 749, 대한기계학회, 1994

189
직렬형 능-수동 제진 방법을 이용한 1축 제진 시스템

Rahul Banik; Dong-Yeun Lee; Gweon, Dae-Gab, 한국소음진동공학회 추계학술대회, pp.176 - 179, 한국소음진동공학회, 2005

190
초정밀 decoupled 이중 스테이지의 설계 및 제어

최영만; 김기현; 김정재; 권대갑; 이문구; 이석원; 박정우; et al, 대한기계학회 2005년도 창립60주년 기념 추계 학술대회 , 대한기계학회, 2005

191
파장 코딩된 실시간 공초점 현미경의 설계

권대갑; 김정민; 강동균, 2005 한국정밀공학회 추계학술대회, pp.576 - 580, 2005

rss_1.0 rss_2.0 atom_1.0