| 196 | Phased Beam Tra cing Method Using the Reflection Coefficient Calculated from the Absorption Coefficient Ih, Jeong-Guon; Jeong, CH; Rindel, JH, Autumn Meeting of the ASK, pp.325 - 328, 2005 |
| 197 | Positioning of Control Sources for Active Noise Control in Three-dimensional Enclosed Space Ih, Jeong-Guon; Kim, JK, Proc. of '95 KACC, pp.136 - 139, 1995 |
| 198 | Positioning of engine mounts by the modal analysis of power train of RWD passenger cars Ih, Jeong-Guon; Cho, YH, KSAE Meeting, pp.42 - 48, 1986 |
| 199 | Prediction of Acoustic Performance of a Two-dimensional Dissipative Silencer By Considering the Sound Propagation Inside Ih, Jeong-Guon; Kim, HJ, Autumn Meeting of KSNVE, 2003 |
| 200 | Prediction of Acoustic Performance of Rectangular Lined Chamber with Mean Flow and Perforated Facing Kim, HJ; Ih, Jeong-Guon, ICSV, pp.0 - 0, 2004-07-01 |
| 201 | Prediction of Booming Sensation and Its Difference Limen for Just Noticeable Change in Frequency Ih, Jeong-Guon, Acoustic Society of America, pp.2351 - 2351, 2003-10 |
| 202 | Prediction of elastic constants and attenuation coefficients by the analysis of elastic wave propagation in composite material Ih, Jeong-Guon; Kim, JY, ASK Meeting, pp.96 - 99, 1992 |
| 203 | Prediction of Floor Impact Noise Using Finite Difference Time Domain Method and Boundary Ih, Jeong-Guon, ASK, 2008-11-01 |
| 204 | Prediction of High-Frequency Sound Radiation Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08 |
| 205 | Prediction of Noise from an Engine Intake System in a Full Acceleration Condition Ih, Jeong-Guon, Inter noise, pp.0 - 0, 2004-08 |
| 206 | Prediction of noise reduction in HVAC ducts with curved bend partitions Ih, Jeong-Guon; Kim Jun-Tai, Proceedings of the 1998 National Conference on Noise Control Engineering. Part 1 (of 3), pp.271 - 276, 1998-04-05 |
| 207 | Prediction of the transmission loss of rectangular lined plenum chamber by the Rayleigh–Ritz method Ih, Jeong-Guon; Kim, HJ, KSNVE, pp.0 - 0, 2005-05-19 |
| 208 | Prediction of Tire Pattern Noise Ih, Jeong-Guon; Shin, Sung-Hwan; Kim, Eun-Bae; Choo, Won-Sik; Kim, Gi-Jeon, ICA2004, pp.0 - 0, 2004-04 |
| 209 | Prediction of Transmission Loss of the Parallelepiped Muffler with Liner Kim, HJ; Ih, Jeong-Guon; Park, CM, Meeting of the KSNVE, 2003 |
| 210 | Prediction of Vibration Response in One-dimensional Structures Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08 |
| 211 | Reciprocal determination of volume velocity of a source in an enclosure Ih, Jeong-Guon; Kim, BK; Kim, JY, Second International Congress on Recent Developments in Air-& Structure-borne Sound and Vibration, pp.645 - 650, 1992 |
| 212 | Reciprocal determination of volume velocity of an acoustic source Ih, Jeong-Guon; Kim, BK, Korean Society of Noise and Vibration Engineering, pp.63 - 66, 1992 |
| 213 | Reconstruction fo Vibration Field Using the Acoustic BEM and Measured Interior Pressures Ih, Jeong-Guon, KSAE Meeting, pp.55 - 60, 1994 |
| 214 | Reconstruction of the Sound Field from a Vibrating Structure Using the Equivalent Source Method Ih, Jeong-Guon; Jeon, IY, IC-SEC, pp.0 - 0, 2004-06 |
| 215 | Reconstruction of the Vibro-acoustic Field on the Shell of the Refrigerator Compressor by Using the Acoustic Holography Based on the BEM 이정권; 강승천; 김성진; 강경석, 한국소음진동공학회 학술대회, pp.133 - 136, 한국소음진동공학회, 1998 |
| 216 | Reconstruction of the Vibro-acoustic Field on the Surface of the Refrigerator Compressor by Using the BEM-based Acoustic Holography Ih, Jeong-Guon; Kang, SC; Kim, SJ; Kang, KS, 1998 International Compressor Engineering Conference, pp.525 - 529, 1998 |
| 217 | Reconstruction of Vibration Field Using the Acoustic BEM and measured Interior Pressures Ih, Jeong-Guon; Kim, BK, KSAE Meeting, pp.55 - 60, 1994 |
| 218 | Reconstruction of Vibro-acoustic Field from the Measured Pressures Using the Boundary Element Mothod Ih, Jeong-Guon; Kim, BK, KSNVE Autumn Meeting, pp.50 - 55, 1995 |
| 219 | Reconstruction of Vibro-acoustic Field of Car Panels Using Acoustic BEM Ih, Jeong-Guon; Kim, BK, Inter Noise 95, pp.1341 - 1344, 1995 |
| 220 | Reconstruction of Vibro-Acoustic Field on the Exterior Surface by Using the Nearfield Acoustic Holography Based on the Nonsingular Boundary Element Method Kang, C; Ih, Jeong-Guon, 한국음향학회 하계학술회의, pp.293 - 296, 한국음향학회, 1999 |
| 221 | Recontruction of Vibro-acoustic Surface Field of Radiating Non-regular Source by Using the BEM-based Acoustic Holography Ih, Jeong-Guon; Kang, SC; Kim, BK, ASK, pp.67 - 72, 1997 |
| 222 | Refinement of car interior noise using the vectorial analysis technique Ih, Jeong-Guon; Minn, HS; Sim, SJ, Korean Society of Noise and Vibration Engineering, pp.7 - 9, 1991 |
| 223 | Refinement of Vehicle Cabin Noise by Changing Interior Trims 이정권; 김재권, 한국음향학회 학술대회, pp.107 - 110, 1998 |
| 224 | Regulation and Measurement of Exterior Noise from Vehicles and Heavy Machines: Overview 이정권, Meeting of the Transportation Machines Section of KSNVE, pp.5 - 24, 2002 |
| 225 | Rendering the Sound Field of a Partially Enclosed Space Using a Source Array Designed in a Holographic Way Ih, Jeong-Guon, NOVEM, pp.0 - 0, 2009-04 |
| 226 | Research works on the noise and vibration control of passenger vehicles Ih, Jeong-Guon, KSME Meeting, pp.769 - 771, 1986 |
| 227 | Resolution Enhancement of Reconstructed Vibro-acoustic Field in the Exterior Problem Using BEM Ih, Jeong-Guon; Kim, BK, 4th Int'l Congress on Sound and Vibration, pp.853 - 856, 1996 |
| 228 | Scattering of Underwater Acoustic Wave by Transversely Isotropic Cylindrical Shells Kim, JY; Ih, Jeong-Guon; Lee, BH, ASK, pp.105 - 109, 1997 |
| 229 | Sensor Proximity Error in the Conformal Near-field Acoustic Holography and Its Solution by Using the Non-singular Boundary Integral Equation Ih, Jeong-Guon; Kang, SC, Joint ASA/EAA/DEGA Meeting on Acoustics (Joint Meeting of the 137th Meeting of the Acoustical Society of America and the 2nd Convention of the European Acoustics Association (Forum Acusticum 99)), pp.1027 -, 1999 |
| 230 | Simulation of a Simplified Intake or Exhaust System to Investigate Measurement Methods for In-duct Acoustical Source Properties Ih, Jeong-Guon, WESTPRAC, pp.663 - 666, 2000-08 |
| 231 | Simulation of Sound Propagation in the Interior Space Using the Time-Domain Acoustic BEM Ih, Jeong-Guon, ASK, 2008-05 |
| 232 | Simulation Techniques for Auralization and Visualization of the Transient Vibro-acoustic Field of Machinery and Space Ih, Jeong-Guon, ICTCA 2009, pp.0 - 0, 2009-09-09 |
| 233 | Sound Field Control by Array of Loudspeakers with a Constant Beam Width, Ih, Jeong-Guon, WESPAC IX, pp.0 - 0, 2006-06-01 |
| 234 | Sound Propagation in Capillary Tubes with Mean Flow Ih, Jeong-Guon; Jeong, KW, the 95 Int'l Congress on Noise Control Eng.(Inter Noise 95), pp.357 - 360, 1995 |
| 235 | Sound Propagation Models and Transmission Loss through Ceramic Catalytic Converters with Mean Flow Ih, Jeong-Guon, International Pacific Conference on Automotive Engineering(IPC-9), pp.79 - 82, 1997 |
| 236 | Sound propagation through the diesel particular filter (DPF) (디젤 매연여과기 (DPF) 내에서의 음향전파) Ih, Jeong-Guon; Choi, WY, Autumn Meeting of the KSNVE, pp.152 - 155, 2005 |
| 237 | Sound propagation through the Diesel particulate filter Ih, Jeong-Guon; Choi, WY, ICSV12, pp.0 - 0, 2005-07 |
| 238 | Sound Quality Evaluation of Tire Pattern Noise Ih, Jeong-Guon, KAIST, pp.0 - 0, 2005-03 |
| 239 | Sound Quality of Booming Noise Inside Passenger Car Ih, Jeong-Guon, KAIST, pp.0 - 0, 2005-03 |
| 240 | Sound Transmission Loss of Finite Panels: Relative Contributions of Resonant and Non-resonant Transmission 이종화; 이정권, 한국소음진동공학회 학술대회, pp.82 - 85, 1998 |
| 241 | Sound Transmission Loss of Fire-resistive Partitions 강현주; 이정권; 김현실; 김재승; 김상렬, 한국소음진동공학회 학술회의, pp.691 - 697, 1999 |
| 242 | Sound Transmission Loss through Finite Single Partitions:the Relative Contribution of Resonant Transmission Component 이종화; 이정권, 한국음향학회 2004년도 추계학술발표대회, pp.207 - 210, 한국음향학회, 2004 |
| 243 | Source and Field Reconstruction of a Rotating Tub Using the Equivalent Source Method Ih, Jeong-Guon, ICSV17, pp.0 - 0, 2010-07-01 |
| 244 | Source Identification by Using the Sound Intensimetry: Problems Associated with the Complex Vibro-acoustic Sources Ih, Jeong-Guon; Kang, SC, ASK, pp.25 - 36, 1997 |
| 245 | Source Identification of a Commercial Air Compressor Noise Considering Sound Quality 정혁; 이정권; 이승화, 한국소음진동공학회 학술대회, pp.687 - 692, 한국소음진동공학회, 1998 |
| 246 | Source localization using a double three-dimensional intensity array Cho, Sung-Kyu; Ih, Jeong-Guon, Acoustics 2012, HKIOA, 2012-05-14 |
| 247 | Stabilization of time-domain acoustic boundary element method for sound radiation problems Jang, Hae-Won; Ih, Jeong-Guon, Acoustics 2012, HKIOA, 2012-05-13 |
| 248 | Statistical Processing of Subjective Listening Test for Sound Quality Analysis Shin, SH; Ih, Jeong-Guon, Meeting of the ASK, pp.355 - 358, 2003 |
| 249 | Statistical processing of the Subjective Listening Test Data Ih, Jeong-Guon, Product Sound Quality 2001, pp.0 - 0, 2002-08 |
| 250 | The Acoustic Characteristics of Cylindrical Chamber Silencers Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08-01 |
| 251 | The acoustic performance measurement of silencers in reflective field Ih, Jeong-Guon; Lee, SH; Choi, WY, Spring Meeting of the KSNVE, 2005 |
| 252 | The Selection of Measurement Positions for BEM-Based NAH Using a Non-Conforal Hologram to Reduce The Reconstruction Error Ih, Jeong-Guon, KSNVE, 2007-11-15 |
| 253 | Theoretical analysis of higher order mode sound distribution with uniform mean flow in expansion chamber mufflers Ih, Jeong-Guon; Lee, BH, 2nd Japan-Korea Symposium on Acoustics, pp.173 - 178, 1983 |
| 254 | Theoretical analysis of higher order mode sound distribution with uniform mean flow in expansion chamber mufflers Ih, Jeong-Guon; Lee, BH, ASK Meeting, pp.14 - 19, 1984 |
| 255 | Theoretical prediction of transmission loss for expansion chamber type mufflers with arbitrarily shaped geometries Ih, Jeong-Guon; Lee, BH, ASK Meeting, pp.11 - 14, 1984 |
