46 | PSP를 이용한 압력 측정 기술 = Development of pressure measurement technique using pressure sensitive paintlink 윤우열; Yoon, Woo-Youl; 성형진; 정명균; et al, 한국과학기술원, 2002 |
47 | RDT와 난류 균질 전단유동에서의 압력-변형률상관관계모형에 대한 연구 = Study on RDT and Computational models of pressure strain correlation in turbulent homogeneous shear flowslink 김동훈; Kim, Dong-Hun; et al, 한국과학기술원, 2010 |
48 | Study on rotating homogeneous turbulence = 균질 회전 난류 유동에 관한 연구link Park, Ju-Yeop; 박주엽; et al, 한국과학기술원, 1999 |
49 | Study on the turbulent thermal convection between two horizontal flat plates = 두 평판사이의 난류열대류에 관한 연구link Yun, Hyo-Chul; 윤효철; et al, 한국과학기술원, 1990 |
50 | THE EQUILIBRIUM STATES AND THE STABILITY ANALYSIS OF REYNOLDS STRESS EQUATIONS FOR HOMOGENEOUS TURBULENT SHEAR FLOWS Lee, WG; Chung, Myung-Kyoon, PHYSICS OF FLUIDS, v.7, no.11, pp.2807 - 2819, 1995-11 |
51 | Three-dimensional boundary layer flow approaching a circular cylinder normal to a semi-infinite flat plate = 평판에 수직한 원통에 접근하는 3-차원 경계층 유동link Lee, Chan-Hee; 이찬희; et al, 한국과학기술원, 1981 |
52 | Turbulent scalar transport behind a line heat source in a uniform shear flow = 균일 전단류내에서 선형열원으로 부터의 난류확산link Kyong, Nam-Ho; 경남호; et al, 한국과학기술원, 1987 |
53 | Unsteady turbulent thermal diffusion of two-dimensional surface discharge of heated water into a rectangular reservoir = 2次元 表面 溫排水의 非正常 亂流熱擴散에 관한 硏究link Lee, Sang-Joon; 이상준; et al, 한국과학기술원, 1986 |
54 | Water to water heat pump 시뮬레이션 = Water to water heat pump simulationlink 이기방; Lee, Ki-Bang; et al, 한국과학기술원, 1987 |
55 | 경계층 천이 현상을 계산하기 위한 난류 모형의 개발 = Development of k-ε model for prediction of transitional boundary-layer flowslink 백성구; Baek, Seong-Gu; et al, 한국과학기술원, 2002 |
56 | 경계층내에서의 천이 모형을 위한 연구 = A study for modelling of laminar to turbulent transition in the boundary layerslink 백성구; Baek, Seong-Gu; 성형진; 정명균; et al, 한국과학기술원, 1997 |
57 | 고온 연료전지 모듈 및 시스템 개발 = Development of high temperature fuel cell modules and systemslink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2011 |
58 | 고체입자가 부상된 이상난류유동의 해석을 위한 입자궤적모델의 연구 = Trajectory model approach to the analysis of gas-particles two-phase turbulent flowslink 팽기석; Pang, Ki-Seok; et al, 한국과학기술원, 1988 |
59 | 곡률수정 2-방정식을 이용한 확대 축소관내의 난류유동 특성의 수치적 연구 = Numerical prediction of turbulent recirculating flow using curvature dependent two-equation modellink 장호철; Jang, Ho-Cheol; et al, 한국과학기술원, 1989 |
60 | 관 유동과 Blasius 유동에서 가장 불안정한 교란에 관하여 Chung, Myung-Kyoon; Choi, Sang-Kyu, 대한기계학회 논문집B, v.27, no.6, pp.766 - 772, 2003-06 |
61 | 관 입구 영역에서의 층류유동 해석 = A study on fluid flow over the entrance region of a tubelink 김병용; Kim, Byung-Yong; et al, 한국과학기술원, 1980 |
62 | 균일전단류가 2차원 곡률 Duct에 유입될 때의 난류유동 특성에 대한 실험적 연구 = Experimental study on the tubulent characteristics of 2-D curved duct flow with inlet uniform shear ratelink 임효재; Im, Hyo-Jae; et al, 한국과학기술원, 1989 |
63 | 균일전단류에 잠긴 원통표면의 압력 및 전단력 분포 = Pressure and skin friction distributions around a circular cylinder immersed in a uniform shear flowlink 변철웅; Byun, Cheol-Woong; et al, 한국과학기술원, 1983 |
64 | 난류 경계층내의 선형열원으로부터의 열확산 예측을 위한 난류모형 연구 = A study on turbulence models for prediction of heat dispersion from an elevated line source in a turbulent boundary layerlink 조중원; Cho, Chung-Won; et al, 한국과학기술원, 1999 |
65 | 난류 동축 제트의 초기 영역에 대한 연구 = A study on the initial region of turbulent coaxial jetslink 이동인; Lee, Dong-In; et al, 한국과학기술원, 1981 |
66 | 난류 동축(同軸) 제트의 구조에 관한 연구 = Study on the structure of turbulent coaxial jetslink 전광민; Chun, Kwang-Min; et al, 한국과학기술원, 1980 |
67 | 난류 열대류에 대한 실험적 연구 = Experimental study of turbulent thermal convectionlink 정재욱; Cheong, Jae-Wook; et al, 한국과학기술원, 1992 |
68 | 난류수송에 관련된 시간척도의 비등방성에 관한 연구 = Study on the anisotropy of turbulent transport time-scalelink 조중원; Cho, Choog-Won; et al, 한국과학기술원, 2005 |
69 | 난류유동장과 관집합체 내에서 진동하는 실린더 사이의 상호공진 = Resonant interaction between turbulent flow field and a vibrating cylinder in a tube banklink 홍신표; Hong, Sin-Pyo; et al, 한국과학기술원, 1985 |
70 | 단부 과도금 원인해소를 위한 단부 와류유동과 Marangoni 대류 분석 = Analysis of vortex structure in the vicinity of strip edge and marangoni convection in order to overcome edge over coatinglink 김상준; Kim, Sang-Joon; et al, 한국과학기술원, 2003 |
71 | 동축 코안다 제트의 초기 영역에 대한 실험적 연구 = An experimental investigation of initial region of the coaxial coanda jetlink 박호동; Park, Ho-Dong; et al, 한국과학기술원, 1984 |
72 | 마이크로콤퓨터를 응용한 온라인 측정 시스템 = Microcomputer-aided on-line measurement systemlink 이정운; Lee, Jeong-Woon; et al, 한국과학기술원, 1981 |
73 | 벽면경계 난류유동에 대한 κ-ε-γ 난류모형의 개발 = Development of κ-ε-γ turbulence model for wall-bounded turbulent shear flowslink 조명종; Cho, Myeong-Jong; et al, 한국과학기술원, 1992 |
74 | 벽면과 평행하게 분출하는 2차원 벽부착 제트 유동의 난류 유동 특성 = Investigation on the turbulence structure of a wall-attaching offset jetlink 윤순현; Yoon, Soon-Hyun; et al, 한국과학기술원, 1991 |
75 | 볼류트 펌프 설계 프로그램 개발을 위한 설계 변수 및 설계 기법에 관한 연구 = Study for design variables and design algorithm to develop a volute pump design programlink 유기수; Yoo, Ki-Soo; et al, 한국과학기술원, 2008 |
76 | 부력의 영향을 받는 수평경계층 유동에 대한 4-방정식 난류모델의 해석 = Four-equation turbulence model for prediction of the turbulent boundary layer affected by buoyancy force over a flat plate ;link 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 1984 |
77 | 불안정 곡선난류유동의 계산을 위한 곡률의존 2-방정식모델의 확장 = Extention of curvature dependent 2-equation model for computation of unstably curved turbulent flowslink 조규식; Cho, Gyu-Sik; et al, 한국과학기술원, 1993 |
78 | 수분흡수가 가스터빈 엔진성능에 미치는 영향에 대한 연구 = A study on the effects of water ingestion on the performance of gas turbine engineslink 이도형; Lee, Doh-Hyoung; et al, 한국과학기술원, 1998 |
79 | 수직 벽 위를 지나는 박리 및 재부착 비압축성 난류유동 에서의 열전달 연구 = Heat transfer in separated and reattached incompresible turbulent flow past a single vertical fencelink 김경천; Kim, Kyung-Chun; et al, 한국과학기술원, 1981 |
80 | 수치적 방법에 의한 두 평판 사이의 난류 열대류의 해석 = Numerical analysis of turbulent thermal convection between two flat plateslink 이장희; Lee, Jang-Hee; et al, 한국과학기술원, 1984 |
81 | 수치적 방법에 의한 두 평판 사이의 난류 열대류의 해석 = Numerical analysis of turbulent thermal convection between two flat plateslink 이원근; Lee, Won-Geun; et al, 한국과학기술원, 1990 |
82 | 수평 평판사이의 난류 열대류에 대한 실험적 연구 = Experimental study of turbulent thermal convection between horizontal plateslink 박주엽; Park, Ju-Yeop; et al, 한국과학기술원, 1993 |
83 | 수평 평판의 온도가 계단적으로 변할 때의 난류 경계층 계산 = Calculation of turbulent boundary layer of a step change in surface temperaturelink 정동현; Chung, Dong-Hyun; et al, 한국과학기술원, 1987 |
84 | 싸이크론 집진기에 있어서의 유동과 성능에 관한 연구 = An experimental study on flow field and performance of the cyclone separatorlink 윤의수; Yoon, Eui-Soo; et al, 한국과학기술원, 1983 |
85 | 아연도금 강판의 체크마크 무늬를 발생하지 않는 에어나이프 시스템 개발 = Development of a novel air-knife system that prevents the check-mark stain on the galvanized steel striplink 윤현기; Yoon, Hyun-Gi; et al, 한국과학기술원, 2010 |
86 | 압축성 근처 후류 해석을 위한 난류 모형의 비교 = Comparison of turbulence models for compressible near-wake flowlink 김성훈; Kim, Seong-Hoon; et al, 한국과학기술원, 1995 |
87 | 얇은 환상 제트 및 동축 제트에 미치는 코안다 효과에 대한 실험적 고찰 = An experimental investigation of coanda effect on the annular jet and the coaxial jetlink 방세윤; Bang, Se-Yoon; et al, 한국과학기술원, 1983 |
88 | 연속 용융 아연도금 공정에서의 단부 과도금 현상에 대한 수치해석 = Numerical analysis of edge overcoating in continuous Hot-Dip galvanizinglink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2002 |
89 | 연속식 용융아연 도금공정에서의 단부 과도금 현상에 대한 수치해석 Chung, Myung-Kyoon; 안기장; 김상준; 조중원, 대한기계학회 논문집B, v.28, no.7, pp.763 - 770, 2004-07 |
90 | 연속식 용융아연도금 공정에서의 단부 과도금 현상과 표면 얼룩무늬 현상을 해결하기 위한 공기역학적 연구 = Aerodynamic investigation of air knife system to resolve the edge overcoating and check mark in a continuous hot-dip galvanizing processlink 안기장; Ahn, Gi-Jang; et al, 한국과학기술원, 2006 |
91 | 열펌프 건조기의 최적 운전 조건 = Optimum operating conditions of heat pump dryerlink 김승태; Kim, Seung-Tae; et al, 한국과학기술원, 1986 |
92 | 열펌프 장치의 성능특성에 관한 실험적 연구 = An experimental study on the characteristics of heat pump systemlink 정태건; Jeong, Tae-Gun; et al, 한국과학기술원, 1983 |
93 | 원관내 열전달을 증가시키기 위한 난류강화기구에 대한 수치적 연구 = Numerical analysis of turbulent promoter for augmenting heat transfer within pipelink 김숙관; Kim, Sook-Kwan; et al, 한국과학기술원, 1990 |
94 | 원심 압축기의 성능 해석을 위한 손실 모델에 대한 연구 = Study on loss models for centrifugal compressor performance analysislink 오형우; Oh, Hyoung-Woo; et al, 한국과학기술원, 1994 |
95 | 원심 임펠러의 내부 유동장에 근거한 이론적인 미끄럼 계수와 최적 디퓨저 설계 절차의 개발 = An analytical slip factor based on an internal flow field for centrifugal impellers and development of optimum design procedure for diffuserlink 팽기석; Paeng, Kee-Seok; et al, 한국과학기술원, 2001 |
96 | 원심압축기 설계에 관한 기초연구 = A preliminary study on the design of a centrifugal compressorlink 박성구; Park, Seong-Koo; et al, 한국과학기술원, 1988 |
97 | 원심형 펌프, 압축기의 설계와 성능해석에 관한 연구 = Study on the design and performance analysis method for centrifugal pumps and compressorslink 오재민; Oh, Jae-Min; et al, 한국과학기술원, 2006 |
98 | 원통면을 지나는 두 대칭 곡면벽 제트류의 상호작용 = Interaction of two symmetric curved wall jets passed a circular cylinderlink 권동수; Kwon, Dong-Soo; et al, 한국과학기술원, 1982 |
99 | 원형제트의 간헐도 측정연구 = Measurement of intermittency in a turbulent round jetlink 김승기; Kim, Soong-Ki; et al, 한국과학기술원, 1988 |
100 | 유선 곡률과 균일전단류가 상호작용을 하는 난류유동에 관한 실험적 연구 = An experimental study on the interaction of uniform shear with streamline curvaturelink 이종훈; Lee, Jong-Hun; et al, 한국과학기술원, 1990 |
101 | 유선곡률과 균일전단에 의한 난류생성의 상호작용에 관한 실험적 연구 = An experimental investigation of the interactive turbulence production between streamline curvature and uniform shearlink 임효재; Lim, Hyo-Jae; et al, 한국과학기술원, 1995 |
102 | 유한개의 원형관 다발 내에서 진동하는 원형관과 난류유동장의 상호작용에 관한 연구 = Relation between turbulent flow field and a vibrating tube in a finite tube banklink 정찬호; Chong, Chan-Ho; et al, 한국과학기술원, 1986 |
103 | 이차원 표면 온배수의 비정상 난류 열확산에 관한 수치적 연구 = Numerical prediction of unsteady turbulent thermal diffusion of surface jets by use of buoyancy-modified κ-ε model of turbulencelink 송인용; Song, In-Yong; et al, 한국과학기술원, 1990 |
104 | 재생형 펌프의 날개 각도에 따른 성능 변화에 관한 연구 = Study on the effect of blade angle on regenerative pump performancelink 최원철; Choi, Won-Chul; 성형진; Sung, Hyung-Jin; et al, 한국과학기술원, 2013 |
105 | 전기 화학 반응을 고려한 고체 산화물 연료 전지의 성능 해석 = The analysis of heat and fluid flow in solid oxide fuel cell with electrochemical reactionlink 김영진; Kim, Young-Jin; et al, 한국과학기술원, 2005 |