Browse "Dept. of Mechanical Engineering(기계공학과)" by Author 862

Showing results 127 to 186 of 419

127
Identification of Vibration Transmission through Belt-Pulley Systems by Using the Structural Intensity Method

Ih, Jeong-Guon; Kwon, YI, Inter Noise 98 Conference, 1998

128
Identification of Vibro-Acoustic Sources in the Highly Reverberant Field Using the Inverse Frequency Response Function

Jeon, IY; Ih, Jeong-Guon; Kim, J, 한국음향학회 하계학술회의, pp.281 - 284, 1999

129
Impedance tube measurements of sound absorbing materials: sensitivity analysis on backing conditions

Lee, JH; Ih, Jeong-Guon; Park, BH; Kim, BH, 한국소음진동공학회 추계학술대회, pp.888 - 891, 한국소음진동공학회, 2001

130
Implementation of SVD and Its Vibro-acoustic Meanings in the Near-field Acoustical Holography Based on the Inverse BEM

Ih, Jeong-Guon, Korea-Japan Symposium of Frontiers in Vibration Science and Technology, pp.0 - 0, 2001-08

131
Implementation of the uniform theory of diffraction in the phased beam tracing method

Ih, Jeong-Guon, ICSV14, pp.0 - 0, 2007-07

132
Implication of geometric factors of simple expansion chambers for their acoustic performance

Ih, Jeong-Guon; Lee, BH, International Noise and Vibration Control Conference (Noise '93), pp.155 - 160, 1993

133
Implications and treatment of wave vectors in using the array-based inverse vibro-acoustic methods for solving the acoustic radiation problems

Ih, Jeong-Guon, The 28th Japan Modal Analysis Conference, JMAC, 2011-09-08

134
Improvement of Reconstruction Accuracy by Using the Nonsingular BEM in the near-field acoustical holography based on the inverse BEM

Ih, Jeong-Guon, International Conference on Theoretical and Computational Acoustics, pp.0 - 0, 2001-08

135
Improvement of Reconstruction Accuracy in BEM-based Near-field Acoustic Holography by Using Partially Measured Surface Data

Ih, Jeong-Guon; Kang, SC, International Congress on Sound and Vibration, pp.837 - 842, 1999

136
In-duct Acoustic Source Model Considering Flow Characteristics at Orifice and Valve Inside Fluid Machinery

Ih, Jeong-Guon; Kim, Tae-Kyoon, 154th ASA Meeting, 2007

137
Instability of FDTD due to Transformed Boundary Condition

Ih, Jeong-Guon, ASK, pp.0 - 0, 2010-06-04

138
Introduction and applications of phased mean tracing method: Can the low frequency response be interpreted by the particle property?

Ih, Jeong-Guon, ICA2007, pp.0 - 0, 2007-09-01

139
Inverse Acoustical Measurement of the Sectional Area in Nonuniform Ducts

Ih, Jeong-Guon, ICSV, pp.0 - 0, 2001-07

140
Inverse design of the modular source array system

Cho, WH; Ih, Jeong-Guon, 2008 International Conference on Control, Automation and Systems, ICCAS 2008, pp.232 - 235, 2008-10-14

141
Inverse Identification of Acoustic Source Information

Ih, Jeong-Guon, WESPAC IX, pp.0 - 0, 2006-06

142
Inverse Problems in Vibro-Acoustics

Ih, Jeong-Guon, NOVEM, pp.0 - 0, 2005-04-01

143
Inverse techniques for the identification and control of vibro-acoustic source parameters and physical properties of automotive systems

Ih, Jeong-Guon, The 7th International styrian Noise, Vibration & Harshness Congress , ISNVH, 2012-06-14

144
Investigation of extended vehicle exhaust source model including non-linear and time varying effect

Ih, Jeong-Guon; Kim, TK, Autumn Meeting of the ASK, pp.305 - 308, 2006

145
Investigation on Noise Characteristics of Pile Driving Operation and Design of Low-noise Pile Cap Based on the Scale Model Experiment

이정권; 이종화; 이기홍; 정승창, 한국소음진동공학회 춘계학술대회, pp.445 - 448, 2001

146
Investigation on the Cause of Instability of Time Domain Acoustic BEM by Using the Wave Vector Concept

Ih, Jeong-Guon, ICA2010, pp.0 - 0, 2010-08-26

147
Investigation on the Correlation between Sound Quality and Special Composition of Vacuum Cleaner Sound by Using the Orthogonal Array

Ih, Jeong-Guon; Lim, DH; Jeong, H; Shin, SH, Sound Quality Symposium, pp.0 - 0, 2002-08

148
Investigation on the Tire Transient Vibration Using the BEM-based NAH and Fourier Analysis

Ih, Jeong-Guon, ASK, pp.0 - 0, 2009-11

149
KOMPSAT-1 위성구조체에 대한 SEA 적용사례

정철호; 이정권; 김영기; 김홍배, 한국음향학회 2004년도 추계학술발표대회, pp.211 - 214, 한국음향학회, 2004

150
KOMPSAT-1 위성구조체에 대한 SEA 적용사례

Ih, JG; Jeong, CH; Kim, YK; Kim, HB, ASKProc of the Autumn Meeting of the ASK, pp.211 - 214, 2004-11

151
KOMSAT-II Scale 모델의 실험적 연성 손실 인자 산출

Ih, Jeong-Guon, ASK, pp.0 - 0, 2003-10

152
Layout of Engine Exhaust System for Low-Noise Idling Condition

Ih, Jeong-Guon, ICSV16, pp.0 - 0, 2009-07-07

153
Linear acoustic design of silencing system considering the acoustic higher-order modes

Ih, Jeong-Guon; Lee, BH, 4th International COnference on Automotive Engineering, pp.197 - 197, 1987

154
Meanings of SVD and Wave-vector Filtering in the Near-field Acoustical Holography Using the Inverse BEM

Ih, Jeong-Guon, Journal of the Acoustical Society of America, pp.2528 - 2528, 2000-11

155
Mearurement of Source Parameters of an Automotive Intake System at Constant RPM

Ih, Jeong-Guon; Nichiuchi, S; Kim, HJ; Lee, SH; Takao, H, Inter-Noise 2004, pp.CD Rom - CD, 2004

156
Measurement of acoustic impedance from the transmission coefficients of porous woven hoses in engine intake systems

Ih, Jeong-Guon; Park, CM; Nakayama, Y; Kitahara, S; Takao, H, 한국음향학회 추계학술대회, pp.371 - 374, 2001

157
Measurement of Acoustic Impedance of Porous Woven Hoses in Engine Intake Systems in the Presence of Mean Flow

이정권; 박철민, 소음진동공학회 춘계학술대회, pp.996 - 1000, 2002

158
Measurement of Acoustic Properties of Porous Duct for Engine Intake Systems

Park, Youngjin; Ih, Jeong-Guon; Park, CM, Proceedings of the Inter Noise 2000 Conference, 2000

159
Measurement of in-duct acoustic properties using three microphones

Ih, Jeong-Guon; Jang, SH; Kim, BK, Proceedings of the 1996 National Conference on Noise Control Engineering. Part 2 (of 2), v.2, pp.729 - 732, 1996-09-29

160
Measurement of Source Parameters of an Automotive Intake System at Constant RPM

Ih, Jeong-Guon, Inter noise, pp.0 - 0, 2004-08-01

161
Measurement of the Acoustic Source Characteristics of the Intake Port in the Refrigerator Compressor

Ih, Jeong-Guon; Jang, SH; Kim, SJ; Shim, JS, 1998 International Compressor Engineering Conference, pp.561 - 564, 1998

162
Measurement of Time-varying Loudness by Using the Short Time Fourier Transform with Variable Frequency Resolution

Ih, Jeong-Guon; Jeong, H, Sound Quality Symposium 98 (SQS 98), pp.67 - 70, 1998

163
Measurement of Vibrational Power Transmission in Belt-Pulley System by Using the Power Flow Method

Ih, Jeong-Guon; Kwon, YI, ASK, pp.431 - 436, 1997

164
Measurements for Acoustic Impedance of a Circular Orifices with Cross Flow

Ih, Jeong-Guon; Lee, SH, Autumn Meeting of ASK, pp.319 - 322, 2003

165
Modeling of Air-borne Tire Noise Transmission into Car interior by Using the Vibro-acoustic Reciprocity and Boundary Element Method

Ih, Jeong-Guon; Kim, BK; Kim, GJ, The 1997 SAE Noise & Vibration Conference and Exposition, pp.1389 - 1395, 1997

166
Modeling of Sound Fields Considering the Acoustical Characteristics of Korean Traditional Musical Instruments

Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08-01

167
Modified Multi-Load Method for Measuring the Source Characteristics of the Intake/Exhaust System

Ih, Jeong-Guon; Jang, SH; Kim, SJ, Proc. of the Inter Noise 98 Conference, (Proceedings in CD-ROM without page numbering, 1998

168
Near-field Limit in Positioning the Microphone for Pressure Measurements in Using the Nearfield Acoustical Holography

Kang, SC; Ih, Jeong-Guon; Park, Youngjin, the Inter Noise 2000 Conference, 2000

169
Noise Characteristics of Pile Driving Operation and Design of a Low-Noise Pile Cap Based on the Scale Model Experiment

Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08-01

170
Noise reduction of the radial dissipative silencer in the intake system of the medium-duty diesel engine

Ih, Jeong-Guon, Inter-Noise, pp.0 - 0, 2008-10

171
Noise Source Identification Using the Inverse Frequency Response Function

Ih, Jeong-Guon, ICA, pp.0 - 0, 2001-09

172
Noise Source Ranking in Automotive Vehicle Using the Inverse FRF Method

Ih, Jeong-Guon, Inter-Noise 2003, pp.0 - 0, 2003-08-01

173
Non-dimensional Analysis of the Acoustic Impedance of Perforated Elements with Bias Flow

Ih, Jeong-Guon; Lee, SH; Peat, KS, Proc of the Autumn Meeting of KSNVE, pp.920 - 923, 2004

174
Numerical investigations of the experimental techniques for measuring the acoustical source parameters of a simplified exhaust system

Ih, Jeong-Guon; Jang, SH, 한국소음진동공학회추계학술대회, pp.866 - 870, 2001

175
Objective Evaluation of Engine Noise Due to the Change of Engine Oil

Ih, Jeong-Guon, Inter-Noise, pp.0 - 0, 2006-12

176
Objective Evaluation of Interior Noise in Running Vehicles

Ih, Jeong-Guon; Jeong, H; Jeon, JJ, Proceedings of the Inter Noise 96 Conference, pp.381 - 384, 1996

177
Objective Evaluation of Vehicle Interior Noise in Operation

Jeong, H; Ih, Jeong-Guon, KSNVE-Spring, pp.47 - 52, 1996

178
On the acoustic design of resonators in silencers

Ih, Jeong-Guon, KSAE Meeting, pp.49 - 55, 1986

179
On the Horizontal Wobbling of an Object Levitated in the Near-Field Acoustic Levitation,

Ih, Jeong-Guon, WESPAC IX, pp.0 - 0, 2006-06

180
On the in-duct acoustical source characteristics of a simplified time-varying fluid machine

Ih, Jeong-Guon; Jang, SH, 한국소음진동공학회 추계학술대회, pp.517 - 521, 2001

181
On the In-duct Acoustical Source Characteristics of a Simplified Time-varying Fluid Machine

Ih, Jeong-Guon, ICSV, pp.0 - 0, 2001-07

182
On the Modeling of Sound Propagation through Capillary Tubes with Mean Flow

Ih, Jeong-Guon, THe 134th Meeting of the Acoustical Society of America, pp.3146 -, 1997

183
On the Percision Mearurement of Bulk Acoustic Properties of Absorbing Materials in an Impedance Tube

Ih, Jeong-Guon; Lee, JH; Kwon, YI, Design and Science 2004(RADS2004), pp.CD Rom - CD, 2004

184
On the Positioning of Control Sources for Active Noise Control in 3-Dimensional Enclosed Space

Ih, Jeong-Guon; Kim, JK, Proc. of the 95 Int'l Symposium on Active Control of Sound and Vibration(Active 95), pp.511 - 518, 1995

185
On the Practical Techniques in the Prediction of the Transmission Loss of Mufflers by Using the BEM

Ih, Jeong-Guon; Jeong, JH, ICA, pp.0 - 0, 2001-09

186
On the Practical Techniques in the Prediction of the Transmission Loss of Mufflers by Using the BEM

Ih, Jeong-Guon, Experimental and Theoretical Mechanics, pp.0 - 0, 2002-03

rss_1.0 rss_2.0 atom_1.0