Browse "Dept. of Mechanical Engineering(기계공학과)" by Author 445
Showing results 51 to 110 of 139
| Effect of moisuture content of wood and RDF in a fluidized bed Kim, T; Choi, Sangmin, TokyoTech-KAIST Joint workshop for Mechnical Engineering Students, 2007 |
| Effect of partical oxidation of wood and RDF in a fluidized bed Kim, T; Choi, Sangmin, China-Japabn-Korea Student Symposium, 2007 |
| Engineering Design, Evaluation and Troubleshooting of Waste Incinerators Choi, Sangmin, Waste SYmposium 2003, 2003 |
| Evaluation of Pyrometric Temperature Measurement Techniques From Broad Band Thermal Radiation Choi, Sangmin, The Third ASME-JSME Thermal Engineering Conference, 1991 |
| Experimental study of effects of axi-asymmetric combustions air supply on temperature distribution inside oil-fired burner and furnace GO, Y; Yang, W; Choi, Sangmin, ASPACC 2009, 2009-05-24 |
| Gas Flows through the Inter-Ring Crevice and Their Influence on UHC Emissions - SAE Technical Paper 1999-01-1533 Kim, C; Bae, C; Choi, Sangmin, International Spring Fuels & Lubricants Meeting & Expositions, 1999 |
| Improvement of Operatinf Conditions in Waste Incinerators using Engineering Tools Choi, Sangmin; Yang, Won; Nam, Hyungsik, ICIPEC, 2004 |
| Influence of Coal Kinetic Characteristics on IGCC Gasifier Efficiency Lee, Hookyung; Choi, Sangmin; Paek, Minsu, ICOPE, 2009 |
| Influence of Operatuion Parameters on PCDD/F Emission of MSW Incinerators Choi, J; Shin, D; Choi, Sangmin, Second International Symposium on Incineration and FLue Gas Treatment Technologies, 1999 |
| Interface between Two Immerscible Fluids in an Impulsively rotating Cylinder Choi, Sangmin; Im, TG; Hyun, JM, 4 ISROMAC, 1992 |
| Interpretation of Design and Operation Parameters on PCDD/Fs Emission of a MSW Incinerator Shin, Donghoon; Choi, Jinwhan; Choi, Sangmin, 4th JSME-KSME Thermal Engineering Conference, Kobe, 2000 |
| Interpretation of Design and Operation Parameters on PCDD/Fs Emission of a MSW Incinerator Shin, Donghoon; Choi, Jinwhan; Choi, Sangmin, ICIPEC, 2000 |
| Interpretation of Design and Operation Parameters on PCDD/Fs Emission of a MSW Incinerator Shin, Donghoon; Choi, Jinwhan; Choi, Sangmin, The 1st International Conference on Incineration, Combustion/Pyrolysis and Emission Control (ICIPEC), 2000 |
| Mathematical modeling of Blast furnace process Jin, H; Choi, Sangmin, Kyushu Univ.-KAIST Joint Seminar, pp.0 - 0, 2006-09 |
| Measurement Devices for Piston Assembly Friction and Oil Film Thickness Choi, Sangmin; Cho, S; Bae, Choongsik, Proc. 15th International Symposium on Internal Combustion Engines, pp.173 - 178, 1999-07 |
| Natural Convection Heat Transfer in the Molten Metal Pool Park, RJ; Kim, SB; Kim, HD; Choi, Sangmin, International Meeting on Nuclear Reactor Thermal Hydraulics, 1997 |
| Numerical Analysis of the Thermo-fluid Flow Change in a Blast Furnace Due to Distribution of the Burden Yang, K; Chung, J; Choi, Sangmin, ASPACC, 2009-05-24 |
| Numerical Simulation of Gas FLow in Incinerators Combined with Bed Combusiton under conditions of High Heating Value of Waste Yang, Won; Choi, Sangmin, International Conference on Incineration, Pyrolysis and Emission Control, pp.93 -, 2004 |
| Numerical Simulation of Solid Fuel Combustion in an Tron Ore Sintering Bed Yang, Won; Choi, Sangmin, i-CIPEC, 2004 |
| Numerical Simulation of the Liquid Flow in the Lower Part of a Blast furnace – Isothermal flow Jin, H; Choi, Sangmin, KAIST-Kyushu university workshop, 2008 |
| Numerical simulation of the liquid flow in the lower part of the blast furnace Jin, H; Choi, Sangmin, UM-KAIST symposium, 2007 |
| Numerical study on the cohesive zone in Blast furnace Choi, Sangmin; Yang, K; Jung, J, Univ. Michigan-KAIST Graduate Student symposium, pp.0 - 0, 2006-11 |
| Numerical Validation of Good COmbustion Performance in Waste Incineartors Shin, D; Ryu, CK; Choi, Sangmin, The 26th Symposium (International) on Combustion, 1996 |
| Off-designPointOperating Characteristics of the MSW Incinerators Choi, Sangmin; GO, Y; Yang, W; Nam, H; Kim, Y, International Conference onIncineration, Pyrolysisand Emission Control, pp.565 -, 2004 |
| Operating conditions in Waste incinerators using enginnering tools Yang, Won; Nam, Hyung-sik; Choi, Sangmin, Incineration/Pyrolysis and Emission Control(3rd i-CIPEC), 3rd International Conference on Combustion, Incineration, 2004 |
| Oxy-Combustion Research Activities in S. Korea - Overview to the Yeongdong 100M We Oxy-Combustion Power Station Project Development Choi, Sangmin; Kim, JS; Kim, S; Kim, Y, 3rd Oxy-combustion Network Meeting, 2008 |
| Oxygen Enriched Combustion in a Full Scale Incinerator Yang, W; Choi, Sangmin, International Conference on Thermeal Treatment Technologies, 2002 |
| Parametric studies for a solid fuel bed with mathematical modelapplication to an iron ore sintering bed Yang, W; Ryu, C; Choi, Sangmin, Proceedings of the 2003 5th International Symposium on Coal Combustion, pp.92 - 98, 2003-11-23 |
| Performance of Prototype High Pressure Swirl Injector Nozzles for Gasoline Direct Injection Jang, C; Choi, Sangmin; Bae, C, SAE 1999 International Fall Fuels & Lubricants Meeting, 1999 |
| Reduced Scale Model Studies for the Design Development of MSW Incinerator Combustion Chamber Choi, Sangmin; Ryu, C; Shin, D, International Symposium on Incineration and Flue Gas Treatment, 1997 |
| Simulation of Bed Combustion and Gas Flow in a Grate Type Waste Incinerator Ryu, Changkook; Shin, Donghoon; Choi, Sangmin, 3rd International Symposium on Incineration and Flue Gas Treatment technologies, Brussels, Belgium, 2001-07-02 |
| Simulation of Bubbling Fluidized Bed Gasifier Part 1- Combination of Simple unit device Kim, T; Choi, Sangmin, 3rd Japan-Korea-China Student Symposium, 2008 |
| Simulation pof Waste Bed Combustion in the Municipal Solid Waste Incinerator Ryu, C; Shin, D; Choi, Sangmin, Second International Symposium on Incineration and Flue Gas Treatment Technologies, 1999 |
| Solid Waste Fuel Combustion in a Fluidized Bed COmbustor Choi, J; Choi, Sangmin, Internaal Symposium on Combustion, 2002 |
| Stack Gas Measuremnt Experiences in MSW Incinerators Shin, D; Choi, JH; Yang, W; Choi, Sangmin, International Conference on Environmental Engineering, 1997 |
| The Effect of Energy Feedback Mechanisms on the Oxidation Rate of Pulverized Coal Choi, Sangmin; Hausmann, G; Kruger, CH, The 2nd Annual Pittsburgh Coal Conference, 1985 |
| The Effects of Operation Condition on PCDD/Fs Emission in Municipal Solid Waste Incinerators: Stack Gas Measurement and Evaluationof Operating Conditions Shin, D; Yang, W; Choi, J; Choi, Sangmin, 18th Symposium on Halogenated Environmental Organic Pollutants, 1998 |
| Tomographic interpretation of visible emission from the fuel-rich premixed flame Ha, Kwangsoon; Choi, Sangmin, Proceedings of the 1998 ASME International Mechanical Engineering Congress and Exposition, pp.529 - 535, 1998-11-15 |
| Transient Development of Flow Between Corotating Shrouded Disks Choi, Sangmin; KIm, JW; Hyun, JM, 4th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, 1992 |
| Transient Shape of the Free Surface of a Liquid in an Abruptly Rotating Cylinder Choi, Sangmin; Kim, JW; Hyun, JM, 4th Asian Congress of FLuid Mechanics, 1989 |
| Unsteady 1-D Model for the bed combustion of solid fuels Ryu, Changkook; Yang, Won; Choi, Sangmin, The 29th International Symposium on Combustion, 2002 |
| 가스화 용융로 설계안의 열물질정산 해석 이민도; 최상민, 대한기계학회 추계학술대회 , pp.0 - 0, 대한기계학회, 2005-11 |
| 가스화 용융로의 설계 인자 분석 이민도; 최상민, 에너지공학회 춘계학술대회, pp.0 - 0, 한국에너지공학회, 2005-05 |
| 가스화 용융로의 설계인자 분석을 위한 비교 연구 김태현; 이민도; 최상민, 한국폐기물학회 발표논문집, pp.0 - 0, 한국폐기물학회, 2006-05 |
| 가스화 용융로의 운전성능 예측기법에 관한 연구 이민도; 최상민, 한국연소학회 추계학술대회, pp.0 - 0, 한국연소학회, 2005-10 |
| 가스화로의 확장을 위한 나무와 RDF의 열중량 분석 김태현; 이민도; 최상민, 한국폐기물학회 춘계학술대회, pp.0 - 0, 한국연소학회, 2006-10 |
| 간헐식 2유체 분사기의 평균입경 예측 장창수; 김승수; 최상민, 한국자동차공학회 춘계학술대회, pp.73 - 78, 한국자동차공학회, 1999 |
| 고로 공정의 해석 모델링 진홍종; 최상민, 한국연소학회 춘계 학술대회, pp.0 - 0, 한국연소학회, 2005-04 |
| 고로 내 융착대 형상 예측모델 양광혁; 최상민; 정진경, 대한기계학회 발표논문집, pp.0 - 0, 대한기계학회, 2006-06 |
| 고발열량 도시 폐기물 소각로의 운전 개선을 위한 공학적 기법 양원; 남형식; 최상민, 한국연소학회 춘계 학술대회, pp.0 - 0, 한국연소학회, 2005-04 |
| 고압 선회분사기 노즐의 성능 - 전산유체해석 장창수; 배충식; 최상민, 한국자동차공학회 춘계학술대회, pp.236 - 241, 한국자동차공학회, 1999 |
| 고압선회 분사 노즐의 특성 연구Part I 선회노즐의 분무특성 파악 장창수; 배충식; 최상민, 한국액체미립화학회 학술대회, pp.147 - 153, 1998 |
| 고압용 선회 분사 노즐의 특성 연구Part II 전산유동해석을 이용한 내부유동 연구 장창수; 배충식; 최상민, pp.154 - 158, 한국액체미립화학회, 1998 |
| 고체 베드 모델링의 단순화 가정과 입자 거동에 대한 고찰 최상민; 안형준, 한국연소학회 2014년도 춘계학술대회, 한국연소학회, 2014-05-23 |
| 고형폐기물층 연소에 관한 연구 최상민; 신동훈, 한국연소학회, KOSCO심포지움, pp.1 - 8, 1998 |
| 국부적인 발열부분을 가진 표면에서의 비등열전달 최상민; 이정기, 대한기계학회 춘추학술대회, v.1, no.2, pp.0 - 0, 대한기계학회, 1989-12 |
| 니켈 제련 공정 내 효율적 에너지 관리 방안 검토 최상민; 하대승, 한국연소학회 2014년도 춘계학술대회, 한국연소학회, 2014-05-23 |
| 단순 연화층 모델을 적용한 석탄 성상별 Coke Oven 내의 가스압 특성 박주현; 최상민, 한국연소학회 추계학술대회, pp.0 - 0, 한국연소학회, 2006-10 |
| 단입자 연소현상의 거시적, 미시적 관찰 및 탈휘발 과정의 해석 Yoo, Jaeyoung; Choi, Sangmin, 제53회 한국연소학회 추계 학술대회, 한국연소학회, 2016-11-25 |
| 덕트 유동에서 증발을 수반하는 액상 스프레이의 혼합 특성에 대한 실험적 연구 김영봉; 최상민, 한국연소학회 추계학술대회, pp.0 - 0, 한국연소학회, 2005-10 |
Discover
Open Access
Date issued
- 4,072 2020 - 2024
- 12,322 2010 - 2019
- 10,774 2000 - 2009
- 6,220 1990 - 1999
- 1,879 1980 - 1989