Browse "Dept. of Mechanical Engineering(기계공학과)" by Title 

Showing results 18081 to 18100 of 36650

18081
Prediction of Surface-Accuracy in Magnetic Polishing Using Sintered Aluminimum-Ferrite Abrasive

Jeong-Du Kim, International Conference on Precision Surface Finishing and Burr Technology, pp.406 - 427, 1994

18082
Prediction of temperature distribution in the two-dimensional bodies with heat source and radiation exchange present at the surface = 表面에서 熱源과 輻射熱交換이 있는 二次元 物體의 溫度分布 決定link

Hong, Dong-Pyo; 홍동표; et al, 한국과학기술원, 1980

18083
Prediction of Texture Evolution and Material Properties in Plastically Deformed FCC Polycrystalline Metals based on Rate-Independent Crystal Plasticit

K. J. Kim; J. W. Yoon; Yang, Dong-Yol, Paper presented at the 12th International Symposium on Plasticity and its Current Applications , 2006-07-17

18084
Prediction of the bending behavior after pre-strain of an aluminum alloy

Pradeau, A.; Thuillier, Sandrine; Yoon, Jeong Whan, AIP Conference Proceedings, v.1769, 2016-10

18085
Prediction of the Ductile-to-Brittle Transition Temperature of a silicon steel under various strain rate conditions

Kwon, Junbeom; Huh, Hoon; Kim, Jae Song, 13th Asia-Pacific Symposium on Engineering Plasticity and Its Applications, AEPA, 2016-12-06

18086
Prediction of the Effective Thermal Conductivity of Mcrosphere Insulation

JIN LINGXUE; 박지호; 이천규; 서만수; 정상권, 2014년도 한국초전도저온학술연합회 동계학술대회, 한국초전도, 저온공학회, 2014-02-20

18087
Prediction of the effective thermal conductivity of microsphere insulation

Jin, Lingxue; Park, Jiho; Lee, Cheonkyu; Seo, Mansu; Jeong, Sang-Kwon, Progress in Superconductivity and Cryogenics (PSAC), v.16, no.1, pp.36 - 41, 2014-03

18088
Prediction of the Effective Thermal Conductivity of Powder Insulation

Jin, Lingxue; Park, Jiho; Lee, Cheonkyu; Jeong, Sangkwon, ICEC 25- ICMC 2014, committee of ICEC 25- ICMC 2014, 2014-07-10

18089
Prediction of the effects of hardening and texture heterogeneities by finite element analysis based on the Taylor model

Jung, Kyung-Hwan; Kim, Dong-Kyu; Im, Yong-Taek; Lee, Yong-Shin, INTERNATIONAL JOURNAL OF PLASTICITY, v.42, pp.120 - 140, 2013-03

18090
Prediction of the Frost Formation on a Cold Flat Plate through the Thermal Network Analysis

Kim, Seok; Lee, Sang Yong, 8th International Conference on Multiphase Flow (ICMF2013), pp.994 - 994, POSTECH, 2013-05-31

18091
Prediction of the onset of fracture of DP980 steel 1.2t under typical loading conditions based on associated and non-associated flow rules

Park, Nam Su; Huh, Hoon, WCCM 2016, KSME and KSCM, 2016-07-28

18092
Prediction of the resonance frequency of natural convection in an enclosure with time-periodic heating imposed on one sidewall

Kwak, HS; Kuwahara, K; Hyun, Jae Min, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, v.41, no.20, pp.3157 - 3160, 1998-10

18093
Prediction of the tensile load capability of co-cured steel-composite tubular single lap joints considering thermal degradation

Lee, Dai Gil; Cho, DH, JOURNAL OF COMPOSITE MATERIALS, v.34, no.8, pp.689 - 722, 2000

18094
Prediction of the tensile load-bearing capacity of a co-cured single lap joint considering residual thermal stresses

Shin, KC; Lee, Jungju, JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, v.14, no.13, pp.1691 - 1704, 2000

18095
PREDICTION OF THE THERMAL PERFORMANCE OF AN INDUSTRIAL NATURAL GAS-FIRED FURNACE.

Song, Tae-Ho; Viskanta, R., GASWAERME INTERNATIONAL, v.37, no.1, pp.22 - 30, 1988-01

18096
Prediction of the transmission loss of rectangular lined plenum chamber by the Rayleigh–Ritz method

Ih, Jeong-Guon; Kim, HJ, KSNVE, pp.0 - 0, 2005-05-19

18097
Prediction of thermal buckling in sheet metal structures based on finite element modeling and its experimental verification = 판금 구조물의 열좌굴 예측을 위한 유한요소 모델링과 실험적 검증link

Lee, Juwon; Yoon, Jeong Whan; et al, 한국과학기술원, 2022

18098
Prediction of Thermal Dispersion Behind a Line Heat Source in Turbulent Flows

Chung, Myung Kyoon, Turbulent Heat Transfer Conf., 1996

18099
Prediction of Thermomechanical Behavior of the AISI316L Stainless Steel

Yoon, S; Hong, SG; Lee, Soon-Bok, ASTM Thermomechancal Fatigue Behavior of Materials, pp.16 - 17, 2001

18100
Prediction of three-dimensional solder joint profile in gullwing leads

Yoo, Choong-Don; Choi, Tong P.; Lee, Tae S., INTERNATIONAL JOURNAL OF MICROCIRCUITS AND ELECTRONIC PACKAGING, v.21, no.2, pp.162 - 170, 1998

rss_1.0 rss_2.0 atom_1.0