DC Field | Value | Language |
---|---|---|
dc.contributor.author | Kim, Soo-Young | - |
dc.contributor.author | Im, Yong-Taek | - |
dc.date.accessioned | 2009-11-04T02:16:39Z | - |
dc.date.available | 2009-11-04T02:16:39Z | - |
dc.date.issued | 1997-05 | - |
dc.identifier.citation | Journal of Materials Processing Technology, Vol.67, No.1, pp.207-213 | en |
dc.identifier.issn | 0924-0136 | - |
dc.identifier.uri | http://hdl.handle.net/10203/12072 | - |
dc.description.abstract | In order to analyze the compression molding of SMC (sheet molding compound) at room temperature, a three-dimensional finite-element program was developed based on the figid-viscoplastic approach. The accuracy of the program developed was tested by solving the a×i-symmetfic compression of a cylindrical specimen of SMC and the three-dimensional compression of rectangular specimens of aluminum alloys under various processing conditions. The simulation results compared well with experimental results obtained from compression tests and with data available in the literature. Based on these comparisons the program was proven to be valid and was further applied in the simulation of the compression molding of rectangular SMC specimens to investigate the effect of friction and molding speeds on the propagation of the flow front of the material and the load requirements in the present investigation. By coupling part of the program with thermal analysis, the currently-developed analysis program can be utilized in determining detailed information during three-dimensional deformation processes. | en |
dc.description.sponsorship | The authors express their thanks to KOSEF and the Cray Research, Inc. for the grant under which this work was more possible, and to LG Chemical Co. for providing the SMC materials. | en |
dc.language.iso | en_US | en |
dc.publisher | Elsevier | en |
dc.subject | Finite-element analysis | en |
dc.subject | Compression molding | en |
dc.subject | Sheet molding compound | en |
dc.title | Three-dimensional finite-element analysis of the compression molding of sheet molding compound | en |
dc.type | Article | en |
dc.identifier.doi | 10.1016/S0167-8655(97)00126-8 | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.