Browse "Dept. of Civil and Environmental Engineering(건설및환경공학과)" by Type Thesis(Master)

Showing results 433 to 452 of 900

433
가스하이드레이트 부존 퇴적토의 수리학적 거동 특성 파악 = Characterization of hydraulic behaviors of gas hydrate-bearing sedimentslink

강철환; 조계춘; et al, 한국과학기술원, 2017

434
감쇠 시스템의 고유진동수와 모드의 민감도 = Natural frequency and mode shape sensitivity of damped systemslink

조홍기; Jo, Hong-Ki; et al, 한국과학기술원, 2001

435
감차적분과 비적합모드를 혼합 사용한 평판요소의 개발 = Development of plate element using combination of reduced integration and nonconforming modeslink

방명석; Bang, Myung-Suk; et al, 한국과학기술원, 1985

436
강우침투 불포화사면파괴의 확률론적 해석 = Probabilistic analysis of unsaturated soil slope instability induced by rainfall infiltrationlink

최정찬; Choi, Jung-Chan; et al, 한국과학기술원, 2006

437
강우침투를 고려한 불포화 사면 설계 방안 = An alternative design method of unsaturated soil slope considering rainfall infiltrationlink

오진규; Oh, Jin-Kyu; et al, 한국과학기술원, 2007

438
개별요소법에 의한 보강된 다층지반의 합리적인 지지력 산정에 대한 연구 = Application of DEM for evaluating bearing capacity of reinforced multi-layered soil depositslink

박준; Park, Jun; et al, 한국과학기술원, 2005

439
개별요소법을 이용한 보강사면의 안정성 해석에 관한 연구 = Stability analysis of reinforced slope by discrete element methodlink

정치광; Jung, Chi-Kwang; et al, 한국과학기술원, 1994

440
개선된 Extended kalman filter를 사용한 비선형 계수의 추정 = Estimation of nonlinear parameters using enhanced extended kalman filterlink

이상훈; Lee, Sang-Hoon; et al, 한국과학기술원, 1989

441
개선된 변절점 평면 유한요소의 개발 = Improved finite element models with variable nodes for the analysis of in-plane structureslink

서진원; Seo, Jin-Won; et al, 한국과학기술원, 1989

442
개선된 점진적 구조최적화 방법에 의한 구조물의 형상최적화 = Evolutionary structural optimization using modified algorithmlink

이준희; Lee, Jun-Hee; et al, 한국과학기술원, 2002

443
객체 기반 영상 분석을 이용한 산사태 인벤토리 맵 제작 - 전라북도 남원시 주천면 일대를 중심으로 = Producing landslide inventory map using object-based image analysis : case studies from Jucheon-myeon, Namwon-si, Jeollabuk-do, South Korealink

이승민; 이승래; et al, 한국과학기술원, 2021

444
거더교 하중분배계수의 경간 길이 및 가로보 간격에 따른 영향 = Influence of span length and cross beam spacing on Load distribution factor at girder bridgeslink

김정래; Kim, Joung Rae; et al, 한국과학기술원, 2015

445
건물구조의 3차원적인 선형해석 = Linear 3-dimensional analysis of building structureslink

김이두; Kim, E-Doo; et al, 한국과학기술원, 1986

446
건설현장에서 사용 가능한 콘크리트 단열온도상승량 계측 장치 개발 = Development of a measuring equipment for the adiabatic temperature rise of concrete at construction sitelink

김태진; 김진근; et al, 한국과학기술원, 2017

447
건식세정탑에서의 아황산가스와 염화비닐 동시제거를 위한 오염물의 고온 3계 평형 분포론의 응용 = Application of high-temperature 3-phase equilibrium distibution of pollutant for the simultaneous removal of sulfur dioxide and vinyl chloride in dry scrubberlink

백경렬; Baek, Kyung-Ryul; et al, 한국과학기술원, 1990

448
건축구조물의 지진하중에 대한 해석방법의 고찰 = Comparison of seismic analysis methods for building structureslink

박좌근; Park, Joa-Guen; et al, 한국과학기술원, 1987

449
건축물 유형 및 공간 특성별 옥상녹화 기반 에너지 저감 방안에 관한 연구 = Green roof system based energy conservation strategies depending on the types and spatial characteristics of buildingslink

손형민; Son, Hyeong-Min; et al, 한국과학기술원, 2014

450
경경불이 평가와 바코드체계를 이용한 의료폐기물 관리 = Medical waste management using economy-ecology balanced life cycle assessment and bar-code systemlink

이종철; Lee, Jong-Chul; et al, 한국과학기술원, 1999

451
경계요소법에 의한 얇은 평판의 휨 문제 해석 = Bending analysis of thin plates by boundary element methodlink

정기택; Chung, Gi-Taek; et al, 한국과학기술원, 1990

452
경계요소법을 이용한 2차원 크랙 해석 = A boundary element method for crack problems in two dimensionslink

안정생; Ahn, Jeong-Saeng; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0