Showing results 1 to 32 of 32
A prediction approach of concrete properties at early ages by using a thermal stress device Cha, Sang Lyul; Jin, Seung-Seop; An, Gyeong Hee; Kim, Jin-Kenn, CONSTRUCTION AND BUILDING MATERIALS, v.178, pp.120 - 134, 2018-07 |
A review of the effect of nanoclays on the fresh and hardened properties of cement-based materials Kawashima, Shiho; Wang, Kejin; Ferron, Raissa Douglas; Kim, Jae Hong; Tregger, Nathan; Shah, Surendra, CEMENT AND CONCRETE RESEARCH, v.147, 2021-09 |
Alkali activated slag pastes with surface-modified blast furnace slag Kim, Gwangmok; Khalid, Hammad Raza; Kim, HJ; Lee, Haeng-Ki, CEMENT CONCRETE COMPOSITES, v.76, pp.39 - 47, 2017-02 |
An overview on the physicochemical properties and photocatalytic pollutant removal performances of TiO2-incorporated cementitious composites Seo, J. H.; Yoon, H. N.; Kim, S. H.; Bae, S. J.; Jang, D., I; Kil, T. G.; Park, S. M.; et al, COMPOSITES RESEARCH, v.33, no.2, pp.68 - 75, 2020-04 |
Characterization of blast furnace slag-blended Portland cement for immobilization of Co Yoon, H. N.; Seo, Joonho; Kim, Seonhyeok; Lee, Haeng-Ki; Park, Solmoi, CEMENT AND CONCRETE RESEARCH, v.134, 2020-08 |
Characterization of cement-based materials using a reusable piezoelectric impedance-based sensor Tawie, Rudy; Lee, Haeng-Ki, SMART MATERIALS STRUCTURES, v.20, no.8, pp.085023 - 085023, 2011-08 |
Characterization of reactive MgO-modified calcium sulfoaluminate cements upon carbonation Seo, Joonho; Yoon, H. N.; Kim, Seonhyeok; Wang, Zhen; Kil, Taegeon; Lee, Haeng-Ki, CEMENT AND CONCRETE RESEARCH, v.146, 2021-08 |
Chloride-bearing characteristics of alkali-activated slag mixed with seawater: Effect of different salinity levels Jun, Yubin; Kim, Taewan; Kim, Jae Hong, CEMENT & CONCRETE COMPOSITES, v.112, 2020-09 |
CO(2)Curing Efficiency for Cement Paste and Mortars Produced by a Low Water-to-Cement Ratio Han, Seong Ho; Jun, Yubin; Shin, Tae Yong; Kim, Jae Hong, MATERIALS, v.13, no.17, pp.3883, 2020-09 |
CO2 uptake of carbonation-cured cement blended with ground volcanic ash Seo, Joonho; Amr, Issam T.; Park, Sol Moi; Bamagain, Rami A.; Fadhel, Bandar A.; Kim, Gwang Mok; Hunaidy, Ali S.; et al, MATERIALS, v.11, no.11, pp.2187 - 2187, 2018-11 |
Control of Viscosity of Cementitious Materials Using Waste Limestone Powder Han, Dongyeop; Yoon, Jin Young; Kim, Jae Hong, INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS, v.13, no.1, 2019-05 |
Early-age strength of CO2 cured alkali-activated blast furnace slag pastes Jun, Yubin; Han, Seong Ho; Kim, Jae Hong, CONSTRUCTION AND BUILDING MATERIALS, v.288, 2021-06 |
Effect of CaO incorporation on the microstructure and autogenous shrinkage of ternary blend Portland cement-slag-silica fume Seo, Joonho; Park, Solmoi; Yoon, Hyun No; Lee, Haeng-Ki, CONSTRUCTION AND BUILDING MATERIALS, v.249, 2020-07 |
Effect of CaSO4 incorporation on pore structure and drying shrinkage of alkali-activated binders Son, Hyeongmin; Park, Sol Moi; Seo, Joonho; Lee, Haeng-Ki, MATERIALS, v.12, no.10, pp.1673 - 1673, 2019-05 |
Effect of the molar ratio of calcium sulfate over ye'elimite on the reaction of CSA cement/slag blends under an accelerated carbonation condition Seo, Joonho; Kim, Seonhyeok; Yoon, HN; Lee, Haeng-Ki, JOURNAL OF BUILDING ENGINEERING, v.46, 2022-04 |
Effects of CO2 Curing on Alkali-Activated Slag Paste Cured in Different Curing Conditions Jun, Yubin; Han, Seong Ho; Shin, Tae Yong; Kim, Jae Hong, MATERIALS, v.12, no.21, pp.3513, 2019-11 |
Electromechanical impedance method of fiber-reinforced plastic adhesive joints in corrosive environment using a reusable piezoelectric device Na, Sam; Tawie, Rudy; Lee, Haeng-Ki, JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES, v.23, no.7, pp.737 - 747, 2012-05 |
Evaluation of internal bleeding in concrete using a self-weight bleeding test Yim, Hong Jae; Kim, Jae Hong; Kwak, Hyo-Gyoung; Kim, Jin Kook, CEMENT AND CONCRETE RESEARCH, v.53, pp.18 - 24, 2013-11 |
Evaluation of of mortar setting time by using electrical resistivity measurements Yim, Hong Jae; Lee, Hanju; Kim, Jae Hong, CONSTRUCTION AND BUILDING MATERIALS, v.146, pp.679 - 686, 2017-08 |
Evaluation on the consumption and performance of polycarboxylates in cement-based materials Yoon, Jin Young; Kim, Jae Hong, CONSTRUCTION AND BUILDING MATERIALS, v.158, pp.423 - 431, 2018-01 |
Impact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials Kim, Hayeon; Son, Hyeongmin; Seo, Joonho; Lee, Haeng-Ki, MATERIALS, v.13, no.18, 2020-09 |
Influence of seawater on alkali-activated slag concrete Jun, Yubin; Kim, Jae Hong; Han, Seong Ho; Kim, Taewan, MATERIALS AND STRUCTURES, v.54, no.3, 2021-06 |
Internal carbonation of belite-rich Portland cement: An in-depth observation at the interaction of the belite phase with sodium bicarbonate Seo, Joonho; Kim, Seonhyeok; Jang, daeik; Kim, Hayeon; Lee, Haeng-Ki, JOURNAL OF BUILDING ENGINEERING, v.44, pp.102907, 2021-12 |
Internal-curing efficiency of cold-bonded coal bottom ash aggregate for high-strength mortar Kim, H. K.; Ha, K. A.; Lee, Haeng-Ki, CONSTRUCTION AND BUILDING MATERIALS, v.126, pp.1 - 8, 2016-11 |
Material characterization and piezoresistive sensing capability assessment of thin-walled CNT-embedded ultra-high performance concrete Seo, Joonho; Jang, Daeik; Yang, Beomjoo; Yoon, Hyun No; Jang, Jeong Gook; Park, Solmoi; Lee, Haeng-Ki, CEMENT & CONCRETE COMPOSITES, v.134, 2022-11 |
Performance of CO2-cured alkali-activated blast-furnace slag incorporating magnesium oxide Jun, Yubin; Han, Seong Ho; Kim, Jae Hong, CONSTRUCTION AND BUILDING MATERIALS, v.429, 2024-05 |
Physicochemical properties and autogenous healing performance of ternary blended binders composed of OPC-BFS-CSA clinker Yoon, H. N.; Seo, Joonho; Kim, Naru; Son, H. M.; Lee, Haeng-Ki, ADVANCES IN CONCRETE CONSTRUCTION, v.15, no.1, pp.11 - 22, 2023-01 |
Potential for the liquid carbonation curing of Portland cement using sodium bicarbonate solutions Seo, Joonho; Choi, Sungsik; Kim, Jisoo; Lee, Haeng-Ki, CONSTRUCTION AND BUILDING MATERIALS, v.427, 2024-05 |
Review on recent advances in securing the long-term durability of calcium aluminate cement (cac)-based systems Kim, Hayeon; Son, HM; Lee, Haeng-Ki, FUNCTIONAL COMPOSITES AND STRUCTURES, v.3, no.3, 2021-09 |
Seawater-mixed alkali-activated materials: a comparative investigation of metal slag suitability Jun, Yubin; Han, Seong Ho; Bae, Young Hwan; Kim, Jae Hong, JOURNAL OF SUSTAINABLE CEMENT-BASED MATERIALS, v.12, no.7, pp.907 - 923, 2023-07 |
The electrically conductive carbon nanotube (CNT)/cement composites for accelerated curing and thermal cracking reduction Kim, G. M.; Yang, B. J.; Ryu, G. U.; Lee, Haeng-Ki, COMPOSITE STRUCTURES, v.158, pp.20 - 29, 2016-12 |
Ultrasonic monitoring of the setting of cement-based materials: Frequency dependence Yim, Hong Jae; Kim, Jae Hong; Shah, Surendra P., CONSTRUCTION AND BUILDING MATERIALS, v.65, pp.518 - 525, 2014-08 |
Discover