Browse "Dept. of Civil and Environmental Engineering(건설및환경공학과)" by Author Choi, Chang-Koon

Showing results 1 to 60 of 75

1
(A) 4-node non-conforming shell element with drilling degree of freedom = 면내 회전자유도를 가지는 4절점 비적합 쉘 요소의 개발link

Lee, Phill-Seung; 이필승; et al, 한국과학기술원, 1999

2
(A) coupled formulation of finite and boundary element methods in two-dimensional elasticity = 이차원 탄성체 문제에서 유한요소법과 경계요소법의 결합을 이용한 요소의 개발link

Ahn, Jeong-Saeng; 안정생; et al, 한국과학기술원, 1989

3
(A) study on the development of shell strip by non-periodic B-spline finite strip method and application to bridge analysis = 비주기 B-spline 유한대판법에 의한 쉘 스트립의 개발 및 교량 해석의 적용에 관한 연구link

Hong, Hyun-Seok; 홍현석; et al, 한국과학기술원, 2001

4
Adaptive mesh h-refinement method using transition elements in plate bending problems = 평판 휨 문제에서 변이요소를 이용한 적응적 체눈 h-세분화법link

Park, Yong-Myung; 박용명; et al, 한국과학기술원, 1990

5
Development of flat shell elements with directly modified non-conforming modes and analysis of shell structures = 직접 수정된 비적합 변위모드를 가진 평면쉘요소의 개발 및 쉘 구조물의 해석link

Lee, Tae-Yeol; 이태열; et al, 한국과학기술원, 2002

6
Element-free galerkin 방법을 이용한 적응적 해석기법에 관한 연구 = Adaptive analysis scheme using element-free galerkin methodlink

이계희; Lee, Gye-Hee; et al, 한국과학기술원, 2001

7
Evolutionary structural optimization 방법을 이용한 콘크리트 박스거더 단면의 형상 최적화 = A section optimization of concrete box girder using an Evolutionary Structural Optimizationlink

류명기; Ryu, Myung-Gi; et al, 한국과학기술원, 2001

8
Improved finite element models for the analysis of plate and shell structures = 평판 및 구조물의 해석을 위한 개선된 유한요소 모델의 개발link

Kim, Sun-Hoon; 김선훈; et al, 한국과학기술원, 1988

9
Improved shell finite elements for linear and nonlinear analysis of shell structures = 선형 및 비선형 해석을 위한 개선된 쉘 유한요소의 개발link

Yoo, Seung-Woon; 유승운; et al, 한국과학기술원, 1990

10
Material nonlinear finite element analysis and optimal design of reinforced concrete structures = 철근콘크리트 구조물의 비선형 해석 및 최적설계link

Kwak, Hyo-Gyoung; 곽효경; et al, 한국과학기술원, 1990

11
Optimal design of steel building structures = 철골구조 건물의 최적설계link

Lee, Hwan-Woo; 이환우; et al, 한국과학기술원, 1989

12
P-delta 효과를 고려한 건물의 효율적인 구조해석 = Simplified p-delta effect analysis for builing structureslink

조지성; Jo, Ji-Seong; et al, 한국과학기술원, 1993

13
PC빔교의 적정 가로보 설계를 위한 파라메트릭 연구 = Parametric study on the design of cross beam of PC beam bridgelink

김재범; Kim, Jae-Bum; et al, 한국과학기술원, 2000

14
Plate element with cutouts for finite element analysis of shear walls = 전단벽의 유한요소해석을 위한 개구부를 갖는 평판요소link

Bang, Myung-Suk; 방명석; et al, 한국과학기술원, 1987

15
Spline 함수를 사용한 finite strip method 에 의한 mindlin 평판해석 = Analysis of mindlin plate by finite strip method using spline functionlink

유승운; Yoo, Seung-Woon; et al, 한국과학기술원, 1987

16
Top-down 개념에 의한 건축구조물의 설계 = Top-down structural design of building structureslink

김이두; Kim, E-Doo; et al, 한국과학기술원, 1993

17
Triangular plate-bending elements by combined node with improved non-conforming modes and substitute shear strain fields = 개선된 비적합 변위형과 대체전단 변형률장을 가진 절점 병합 삼각형 평판휨요소link

Kang, Yun-Sook; 강윤숙; et al, 한국과학기술원, 2003

18
Wind induced nonlinear behavior of reinforced concrete hyperboloid shell with shape imperfection = 형상불완전을 가진 철근콘크리트 쌍곡쉘의 바람하중에 의한 비선형거동link

Noh, Hyuk-Chun; 노혁천; et al, 한국과학기술원, 1999

19
감차적분과 비적합모드를 혼합 사용한 평판요소의 개발 = Development of plate element using combination of reduced integration and nonconforming modeslink

방명석; Bang, Myung-Suk; et al, 한국과학기술원, 1985

20
개선된 변절점 평면 유한요소의 개발 = Improved finite element models with variable nodes for the analysis of in-plane structureslink

서진원; Seo, Jin-Won; et al, 한국과학기술원, 1989

21
개선된 점진적 구조최적화 방법에 의한 구조물의 형상최적화 = Evolutionary structural optimization using modified algorithmlink

이준희; Lee, Jun-Hee; et al, 한국과학기술원, 2002

22
건물구조의 3차원적인 선형해석 = Linear 3-dimensional analysis of building structureslink

김이두; Kim, E-Doo; et al, 한국과학기술원, 1986

23
건물기초의 형식선정 및 구조설계를 위한 일관 시스템 = A system for type selection and structural design of building foundationslink

김한수; Kim, Han-Soo; et al, 한국과학기술원, 1993

24
경계요소법을 이용한 2차원 크랙 해석 = A boundary element method for crack problems in two dimensionslink

안정생; Ahn, Jeong-Saeng; et al, 한국과학기술원, 1986

25
고속철도교량의 교량-열차 상호작용해석에 관한 연구 = A Study on the analysis of the high-speed train-bridge interactionslink

송명관; Song, Myung-Kwan; et al, 한국과학기술원, 2002

26
공학용 전문가 시스템 도구의 개발 = Development of the engineering expert system toollink

백종균; Paik, Jong-Gyun; et al, 한국과학기술원, 1989

27
교량 주탑의 공기역학적 제진방법에 관한 실험적 연구 = An experimental study on the aerodynamic control of bridge towerlink

권대건; Kwon, Dae-Kun; et al, 한국과학기술원, 1995

28
교량의 Box-girder에 대한 내풍특성의 실험적 연구 = An experimental study on the aerodynamic characteristics of the bridge box-girderlink

강성원; Kang, Sung-Won; et al, 한국과학기술원, 1992

29
교량의 계획설계를 위한 규칙기반 전문가 시스템 = Rule-based expert systme for conceptual design of bridgeslink

최인혁; Choi, In-Hyuk; et al, 한국과학기술원, 1993

30
교량의 계획설계를 위한 전문가 시스템의 기본모델 = A preliminary model of HIBPES : a highway bridge planning expert systemlink

최인혁; Choi, In-Hyuk; et al, 한국과학기술원, 1988

31
규격부재(H-Beam)로 이루어진 frame 의 최적화 = Optimal design of frame with specified H-beam member sizeslink

이환우; Lee, Hwan-Woo; et al, 한국과학기술원, 1986

32
근접한 세 원형구조물의 공기역학적 거동에 관한 연구 = On the aerodynamic response of three circular cylinders in close proximitylink

김윤석; Kim, Yun-Seok; et al, 한국과학기술원, 1992

33
단면최적화를 이용한 철근콘크리트 구조물의 최적설계 = Optimum design of reinforced concrete structure by member cross-section optimizationlink

이상수; Lee, Sang-Soo; et al, 한국과학기술원, 1986

34
단순 PC빔교의 연속바닥슬래브에 발생하는 응력집중에 관한 연구 = A study on the stress concentrations of simply supported bridges with continuous slabslink

송명관; Song, Myung-Kwan; et al, 한국과학기술원, 1997

35
대체 변형률장에 의한 효율적인 4절점 쉘 유한요소의 개발 = A simple and efficient four node degenerated shell element based on the assumed strain interpolationlink

백종균; Paik, Jong-Gyun; et al, 한국과학기술원, 1994

36
등매개 변수 요소를 이용한 쉘의 선형 및 비선형 안정 해석 = Linear and nonlinear stability analysis of shells using degenerated isoparametric elementslink

이남호; Lee, Nam-Ho; et al, 한국과학기술원, 1986

37
면내 회전자유도를 가지는 8절점 평면쉘 요소의 개발 = Development of 8-node flat shell element with drilling degree-of-freedomlink

한인선; Han, In-Seon; et al, 한국과학기술원, 1999

38
면내 회전자유도를 가진 변이 평면 쉘요소의 개발과 이를 이용한 적응적 체눈 세분화 = Development of variable-node flat shell element with drilling degree-of-freedom and its application to adaptive mesh refinementlink

이완훈; Lee, Wan-Hoon; et al, 한국과학기술원, 1995

39
면진고무받침의 유한요소해석 = Finite element analysis of seismic isolation rubber bearinglink

박기수; Park, Ki-Su; et al, 한국과학기술원, 2001

40
모서리가 절단된 사각 단면의 공기역학적 특성에 관한 실험적 연구 = An experimental study on the aerodynamic characteristics of rectangular cylinders with various corner cutslink

권대건; Kwon, Dae-Kun; et al, 한국과학기술원, 2001

41
무한요소를 이용한 무한영역의 해석 = Analysis of infinite media using infinite elementslink

남우준; Nam, Woo-Jun; et al, 한국과학기술원, 2000

42
바닥판 타설 순서가 합성형 교량에 미치는 영향 = Influence of construction sequence of deck slab in composite bridgelink

김은성; Kim, Eun-Sung; et al, 한국과학기술원, 1998

43
바람-구조물 상호 작용에 관한 적응적 유한요소 해석 = Adaptive finite element analysis of wind-structure interactionslink

유원진; Yu, Won-Jin; et al, 한국과학기술원, 2000

44
박스거더 횡단면의 점진적 구조 최적화 방법의 개선 = Improved algorithm for evolutionary structural shape optimization of box girder bridgelink

황대원; Hwang, Dae-Won; et al, 한국과학기술원, 2003

45
변절점 요소를 이용한 적응적 체눈 세분화/재결합 기법에 의한 유한요소해석 = Finite element system analysis by h-version adaptive mesh refinement/recovery schemelink

이은진; Lee, Eun-Jin; et al, 한국과학기술원, 2003

46
변절점을 가진 평판요소의 개발 = Development of plate bending element with variable nodeslink

박용명; Park, Yong-Myung; et al, 한국과학기술원, 1987

47
병렬 전단벽 구조물의 효율적인 해석에 관한 연구 = A study on the effective analysis of coupled shear wall structurelink

김춘애; Jin, Chun-Ai; et al, 한국과학기술원, 2003

48
복합적층 구조물의 유한요소해석 = Finite element analysis of laminated composite structureslink

윤군진; Yoon, Goon-Jin; et al, 한국과학기술원, 1996

49
볼트 접합부의 비선형 해석을 위한 수치해석 방법에 관한 연구 = Computational approach for the nonlinear behavior of bolted connectionslink

정기택; Chung, Gi-Taek; et al, 한국과학기술원, 1995

50
비대칭 비주기 B3-spline 유한대판요소의 개발 및 교량해석에의 적용 = A Non-symmetric/non-periodic B3-spline finite strip element and its application to bridge analysislink

김경호; Kim, Kyeong-Ho; et al, 한국과학기술원, 2003

51
비압축성 Navier-stokes 방정식의 효율적인 시간해석알고리즘에 대한 비교연구 = A comparative study of effieint transient analysis algorithm for incompressible navier-stokes equationslink

이은진; Lee, Eun-Jin; et al, 한국과학기술원, 1998

52
비적합모드를 가진 입체변이요소에 의한 3차원 적응적 체눈 세분화 = Three-dimensional adaptive mesh refinement using variable-node solid elements with nonconforming modeslink

이남호; Lee, Nam-Ho; et al, 한국과학기술원, 1994

53
사변형 요소를 이용한 추계론적 유한요소해석 = Stochastic finite element analysis by using quadrilateral elementslink

노혁천; Noh, Hyuk-Chun; et al, 한국과학기술원, 1993

54
사장교 케이블의 최적화에 관한 연구 = The cable optimization of cable-stayed bridgeslink

이태열; Lee, Tae-Yeol; et al, 한국과학기술원, 1997

55
상자형 철근콘크리트 지하구조물의 비선형 해석 = Nonlinear analysis of underground reinforced concrete box structurelink

최장환; Choi, Jang-Hwan; 최창근; 이동근; et al, 한국과학기술원, 1985

56
시간-공간 적응적 방법을 이용한 동적문제의 유한요소해석 = A spatical-temporal adaptive control in finite element analysis of dynamic problemslink

정홍진; Chung, Heung-Jin; et al, 한국과학기술원, 1995

57
재료 비선형을 고려한 철근콘크리트 슬래브의 유한요소 해석 = Material nonlinear finite element analysis in reinforced concrete slabslink

곽효경; Kwak, Hyo-Gyoung; et al, 한국과학기술원, 1987

58
절점병합에 의한 면내 회전자유도를 갖는 삼각형 평면응력요소의 개발 = Development of triangular membrane element with drilling degree-of-freedom by combined nodelink

오세택; Oh, Se-Taek; et al, 한국과학기술원, 2002

59
점진적인 고정하중을 고려하는 고층건물의 구조해석법 = New approaches to the high-rise building analysis with sequential dead loadslink

정혜교; Chung, Hye-Kyo; et al, 한국과학기술원, 1992

60
지진하중을 받는 두 인접구조물간의 상호작용에 관한 연구 = A study on the interaction effect of two adjacent structures for seismic loadlink

김우범; Kim, Woo-Bum; et al, 한국과학기술원, 1986

rss_1.0 rss_2.0 atom_1.0