Showing results 1 to 26 of 26
A combined experimental and micromechanical approach to investigating PTC and NTC effects in CNT-polypropylene composites under a self-heating condition Kil, Taegeon; Jin, DW; Yang, Beomjoo; Lee, Haeng-Ki, COMPOSITE STRUCTURES, v.289, 2022-06 |
A Comparison of Methods to Evaluate the Behavior of Finite Element Models With Rough Surfaces Thompson, Mary Kathryn, SCANNING, v.33, pp.353 - 369, 2011 |
A novel hybrid design algorithm for spiral coil energy piles that considers groundwater advection Go, Gyu-Hyun; Lee, Seung-Rae; Kang, Han-Byul; Yoon, Seok; Kim, Min-Jun, APPLIED THERMAL ENGINEERING, v.78, pp.196 - 208, 2015-03 |
An experimental and numerical approach to derive ground thermal conductivity in spiral coil type ground heat exchanger Yoon, Seok; Lee, Seung-Rae; Go, Gyu-Hyun; Park, Skhan, JOURNAL OF THE ENERGY INSTITUTE, v.88, no.3, pp.229 - 240, 2015-08 |
Damage characteristics of high-performance fiber-reinforced cement composites panels subjected to projectile impact Lee, MinJoo; Park, Gang-Kyu; Kim, Sung-Wook; Kwak, Hyo-Gyoung, INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, v.214, pp.106919, 2022-01 |
Evaluation of stainless steel pipe performance as a ground heat exchanger in ground-source heat-pump system Yoon, Seok; Lee, Seung-Rae; Kim, Min-Jun; Kim, Woo-Jin; Kim, Geon-Young; Kim, Kyungsu, ENERGY, v.113, pp.328 - 337, 2016-10 |
Evolution of the binder gel in carbonation-cured Portland cement in an acidic medium Seo, JH; Park, Sol Moi; Lee, Haeng-Ki, CEMENT AND CONCRETE RESEARCH, v.109, pp.81 - 89, 2018-07 |
Heating and heat-dependent mechanical characteristics of CNT-embedded cementitious composites Kim, GM; Naeem, Faizan; Kim, HK; Lee, Haeng-Ki, COMPOSITE STRUCTURES, v.136, pp.162 - 170, 2016-02 |
Heavy Metal Leaching, CO2 Uptake and Mechanical Characteristics of Carbonated Porous Concrete with Alkali-Activated Slag and Bottom Ash Kim, Gwangmok; Jang, Jeong Gook; Naeem, Faizan; Lee, Haeng-Ki, INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS, v.9, no.3, pp.283 - 294, 2015-09 |
Hydration and phase conversion of MgO-modified calcium aluminate cement Nawaz, Ahmad; Kim, Naru; Seo, Joonho; Farooq, SZ; Lee, Haeng-Ki, CONSTRUCTION AND BUILDING MATERIALS, v.369, 2023-03 |
Impact of Bio-Carrier Immobilized with Marine Bacteria on Self-Healing Performance of Cement-Based Materials Kim, Hayeon; Son, Hyeongmin; Seo, Joonho; Lee, Haeng-Ki, MATERIALS, v.13, no.18, 2020-09 |
Impacts of metakaolin on lightweight concrete by type of fine aggregate Kim, Hyeong-Ki; Hwang, EA; Lee, Haeng-Ki, CONSTRUCTION AND BUILDING MATERIALS, v.36, pp.719 - 726, 2012-11 |
Life cycle cost analysis and smart operation mode of ground source heat pump system Yoon, Seok; Lee, Seung-Rae, SMART STRUCTURES AND SYSTEMS, v.16, no.4, pp.743 - 758, 2015-10 |
Mechanical properties of lightweight concrete made with coal ashes after exposure to elevated temperatures Ahn, Y. B; Jang, Jeong Gook; Lee, Haeng-Ki, CEMENT & CONCRETE COMPOSITES, v.72, pp.27 - 38, 2016-09 |
Modification of Interfacial Tension and Wettability in Oil-Brine-Quartz System by in Situ Bacterial Biosurfactant Production at Reservoir Conditions: Implications for Microbial Enhanced Oil Recovery Park, Taehyung; Jeon, Min-Kyung; Yoon, Sukhwan; Lee, Kun Sang; Kwon, Tae-Hyuk, ENERGY & FUELS, v.33, no.6, pp.4909 - 4920, 2019-06 |
New Approach to Quantifying Rock Joint Roughness based on Roughness Mobilization Characteristics Hong, Eun-Soo; Lee, In-Mo; Cho, Gye-Chun; Lee, Seok-Won, KSCE JOURNAL OF CIVIL ENGINEERING, v.18, no.4, pp.984 - 991, 2014-05 |
Numerical analysis of offshore monopile during repetitive lateral loading Chong, Song-Hun; Shin, Ho-Sung; Cho, Gye-Chun, GEOMECHANICS AND ENGINEERING, v.19, no.1, pp.79 - 91, 2019-09 |
Numerical data-driven machine learning model to predict the strength reduction of fire damaged RC columns Kim, Hyun-Kyoung; Kwak, Hyo-Gyoung; Hwang, Ju-Young, COMPUTERS AND CONCRETE, v.32, no.6, pp.625 - 637, 2023-12 |
Numerical evaluation of the effects of groundwater flow on borehole heat exchanger arrays Choi, Jung Chan; Park, Joonsang; Lee, Seung Rae, RENEWABLE ENERGY, v.52, pp.230 - 240, 2013-04 |
Numerical simulations of blast responses for SFRC slabs using an orthotropic model Lee, MinJoo; Kwak, Hyo-Gyoung, ENGINEERING STRUCTURES, v.238, pp.112150, 2021-07 |
Performance of CO2-cured alkali-activated blast-furnace slag incorporating magnesium oxide Jun, Yubin; Han, Seong Ho; Kim, Jae Hong, CONSTRUCTION AND BUILDING MATERIALS, v.429, 2024-05 |
Properties of Alkali-Activated Slag Paste Using New Colloidal Nano-Silica Mixing Method Kim, Taewan; Kim, Jae Hong; Jun, Yubin, MATERIALS, v.12, no.9, 2019-05 |
Pullout behavior of tree root-inspired anchors: development of root architecture models and centrifuge tests Kim, Yoon-Ah; Burrall, Matthew; Jeon, Min-Kyung; Dejong, Jason T.; Martinez, Alejandro; Kwon, Tae-Hyuk, ACTA GEOTECHNICA, v.19, no.3, pp.1211 - 1229, 2024-03 |
Pullout Capacity of Horizontally Loaded Suction Anchor Installed in Silty Sand Kim, Surin; Choo, Yun Wook; Kim, Dong-Soo, MARINE GEORESOURCES GEOTECHNOLOGY, v.34, no.1, pp.87 - 95, 2016-01 |
The electrically conductive carbon nanotube (CNT)/cement composites for accelerated curing and thermal cracking reduction Kim, G. M.; Yang, B. J.; Ryu, G. U.; Lee, Haeng-Ki, COMPOSITE STRUCTURES, v.158, pp.20 - 29, 2016-12 |
모래지반에 설치된 확공형 인장 보강재의 인발 저항력 산정에 관한 연구 = Investigation on evaluating pullout resistance of an expanded tension anchorage in sandlink 최호영; Choi, Ho-Young; et al, 한국과학기술원, 2004 |
Discover