Browse by Type Thesis(Master)

Showing results 18434 to 18453 of 31977

18434
W 및 Mo 함유 고장력 합금강의 저싸이클 피로성질 (U.S. Steel "T-1" alloy) = Low cycle fatigue behavior of W and Mo containing high strength alloy steel (U.S.Steel "T-1" alloy)link

정한섭; Chung, Han-Sub; et al, 한국과학기술원, 1982

18435
W-20wt%Cu 나노복합재료의 열적 기계적 특성 = Thermal and mechanical properties of W-20wt%Cu nanocompositeslink

이용언; Lee, Yong-Un; et al, 한국과학기술원, 2001

18436
W-250 maraging강에서 Ti 함량과 열처리가 기계적 성질, 미세조직 및 시효거동에 미치는 영향 = The effects of Ti and heat treatment on mechanical properties, microstructure, and aging behavior in W-250 maraging steelslink

정재영; Jung, Jae-Young; et al, 한국과학기술원, 1988

18437
W-Ni-Fe heavy-alloy 에서 조성, 성형압력 및 텅크스텐 입자크기가 소결중 밀도화에 미치는 영향 = The effect of tungsten power size, compacting pressure and composition on densification during sintering of W-Ni-Fe heavy-alloylink

천길성; Churn, Kil-Sung; et al, 한국과학기술원, 1976

18438
W-Ni-Fe 계 고밀도 합금에서 냉간가공과 annealing 이 기계적 성질에 미치는 영향 = Mechanical property of cold worked and annealed W-Ni-Fe heavy alloylink

윤영섭; Yoon, Yung-Sup; et al, 한국과학기술원, 1977

18439
W-Ni-Fe 와 W-Ni-Cu 계 중합금속의 액상 소결에서 기공의 소멸기구 = Pore elimination process in liquid-phase sintering of W-Ni-Fe and W-Ni-Cu heavy alloyslink

설경원; Seol, Kyeong-Won; et al, 한국과학기술원, 1981

18440
W-Ni-Fe 의 고밀도 소결합금에 있어서 텅그스텐 분말의 크기, 성분 및 소결온도가 밀도와 기계적 성질에 미치는 영향 = The effects of tungsten power size, composition and sintering temperature on properties of W-Ni-Fe heavy alloylink

양성근; Yang, Sung-Keun; et al, 한국과학기술원, 1976

18441
W-Ni-Fe 조성 계에서 텅그스텐 입자 성장 기구와, 소결 시간이 기계적 성질 및 밀도에 미치는 영향에 관한 연구 = The effect of sintering time on tungsten grain growth and mechanical properties of W-Ni-Fe heavy-alloylink

조천행; Cho, Chun-Heang; et al, 한국과학기술원, 1976

18442
W-Ni-Fe 중합금계 소결체내의 잔존기공에 대한 연구 = Formation of residual porosities in the W-Ni-Fe heavy alloylink

조융국; Cho, Yoong-Goog; 윤덕용; 강석중; et al, 한국과학기술원, 1985

18443
W-Ni-Fe 중합금속에서 진공처리에 의한 기계적 성질의 변화 = The effect of vacuum treatment on mechanical properties of W-Ni-Fe heavy alloylink

윤희구; Yoon, Hee-Koo; et al, 한국과학기술원, 1980

18444
W-Ni-Fe 중합금에서 진공처리와 소결분위기가 기계적 성질에 미치는 영향 = The effects of vacuum treatment and sintering atmosphere on mechanical properties of W-Ni-Fe heavy alloylink

이상훈; Lee, Sang-Hoon; et al, 한국과학기술원, 1981

18445
W-Ni-Fe 중합금의 액상소결중 소결분위기의 변화가 기공소멸에 미치는 영향 = Effect of atmosphere change on the liquid-filling of pores during liquid phase sintering of W-Ni-Felink

홍병선; Hong, Byung-Sun; 윤덕용; 강석중; et al, 한국과학기술원, 1985

18446
W-대역 수동 이미징을 위한 디케 복사계 (Dicke Radiometer) 설계 = Design of W-band dicke radiometer for passive imaginglink

송원영; 홍성철; et al, 한국과학기술원, 2020

18447
WADN : 웹 어플리케이션 전송 기법을 이용한 어플리케이션 서버의 동적 확장 방법 = WADN : a method for extending application servers dynamically using a Web application delivery mechanismlink

임민열; Lim, Min-Yeol; et al, 한국과학기술원, 2002

18448
Wafer level packages using anisotropic conductive adhesive for flip chip assembly = 이방성 전도성 접착제 용액을 이용한 웨이퍼 레벨 패키지에 관한 연구link

Kim, Il; 김일; et al, 한국과학기술원, 2008

18449
Wagner-whitin 알고리즘의 MRP 에의 응용-사례연구 = The application of wagner-whitin lot sizing technique to material requierment planning -case studylink

류완수; Ryu, Wan-Soo; et al, 한국과학기술원, 1980

18450
Waiting time optimization in queueing models of equipment with multiple preventive maintenance cycles = 복수 예방 정비를 고려한 대기행렬 모델의 체재 시간 최적화link

Kim, Hun-Gil; 김헌길; et al, 한국과학기술원, 2014

18451
Wake 내에 있는 원형 실린더의 진동에 관한 연구 = A study on the excitation of a circular cantilever cylinder in a wakelink

이태원; Lee, Tae-Won; et al, 한국과학기술원, 1983

18452
Walking behavior patterns of the elderly and its relationship with the built environment considering the activity purpose = 활동목적을 고려한 고령자의 보행행태 분류 및 도시건축 환경과의 관계 도출link

Kim, Yujin; Lim, Lisa; 임리사; Yeo, Hwasoo; et al, 한국과학기술원, 2023

18453
Walking behavior recognition system using smart insole = 스마트 인솔을 이용한 보행 인식 시스템link

Kim, Seok Min; Kyung, Chong-Min; et al, 한국과학기술원, 2018

rss_1.0 rss_2.0 atom_1.0