Browse by Subject shear strength

Showing results 1 to 16 of 16

1
(A) research on vacuum packaging technology and pirani pressure sensor for uncooled infrared sensor = 비냉각 적외선 센서용 진공 패키징 기술 및 피라니 압력 센서에 관한 연구link

Shim, Hyun-Bin; 심현빈; et al, 한국과학기술원, 2011

2
(A) research on vacuum packaging technology and pirani pressure sensor for uncooled infrared sensor = 비냉각 적외선 센서용 진공 패키징 기술 및 피라니 압력 센서에 관한 연구link

Shim, Hyun-Bin; 심현빈; et al, 한국과학기술원, 2011

3
Characterization of small-sized eutectic Sn-Bi solder bumps fabricated using electroplating

Jung, HR; Kim, HH; Lee, Won-Jong, JOURNAL OF ELECTRONIC MATERIALS, v.35, no.5, pp.1067 - 1073, 2006-05

4
Comparison Between Shear Behaviors of Overconsolidated Nakdong River Sandy Silt and Silty Sand

Tint, Khin Swe; Lee, Seung Rae; Kim, Young Su, MARINE GEORESOURCES GEOTECHNOLOGY, v.27, no.3, pp.217 - 229, 2009

5
Effect of cooling rate on growth of the intermetallic compound and fracture mode of near-eutectic Sn-Ag-Cu/Cu pad: Before and after aging

Jeong, SW; Kim, JH; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.33, no.12, pp.1530 - 1544, 2004-12

6
Interfacial Reactions and Microstructures of Sn-0.7Cu-xZn Solders with Ni-P UBM During Thermal Aging

Cho, Moon Gi; Kang, Sung K.; Seo, Sun-Kyoung; Shih, Da-Yuan; Lee, HyuckMo, JOURNAL OF ELECTRONIC MATERIALS, v.38, no.11, pp.2242 - 2250, 2009-11

7
Interfacial Shearing Behavior along Xanthan Gum Biopolymer-Treated Sand and Solid Interfaces and Its Meaning in Geotechnical Engineering Aspects

Lee, Minhyeong; Im, Jooyoung; Cho, Gye-Chun; Ryu, Hee Hwan; Chang, Ilhan, APPLIED SCIENCES-BASEL, v.11, no.1, pp.139, 2021-01

8
Investigation of flip chip under bump metallization systems of Cu pads

Nah, JW; Paik, Kyung-Wook, IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, v.25, no.1, pp.32 - 37, 2002-03

9
Prediction of Shear Strength for Large Anchors Considering the Prying Effect and Size Effect

Kim, Kangsik; Lee, Kwangsoo; An, Gyeonghee, INTERNATIONAL JOURNAL OF CONCRETE STRUCTURES AND MATERIALS, v.10, no.4, pp.451 - 460, 2016-12

10
Prediction of Shear Strength of Reinforced Concrete Beams without Web Reinforcement

Kim, J.K.; Park, Y.D., ACI Materials Journal, Vol. 93, No. 3, pp. 213-222, 1996-05

11
Sand and silty-sand soil stabilization using bacterial enzyme-induced calcite precipitation (BEICP)

Hoang, Tung; Alleman, James; Cetin, Bora; Ikuma, Kaoru; Choi, Sun-Gyu, CANADIAN GEOTECHNICAL JOURNAL, v.56, no.6, pp.808 - 822, 2019-06

12
Shear behavior of rectangular-shaped asperities in rock joints

Kwon, Tae-Hyuk; Hong, Eun-Soo; Cho, Gye-Chun, KSCE JOURNAL OF CIVIL ENGINEERING, v.14, no.3, pp.323 - 332, 2010-05

13
Shear strength estimation of sandy soils using shear wave velocity

Cha, M.; Cho, Gye-Chun, GEOTECHNICAL TESTING JOURNAL, v.30, no.6, pp.484 - 495, 2007

14
Sn3.5Ag와 Sn0.7Cu 무연솔더에 대한 고온 진동 신뢰성 연구

고용호; 김택수; 이영규; 유세훈; 이창우, 마이크로전자 및 패키징학회지, v.19, no.3, pp.31 - 36, 2012-09

15
Strength-based and wave-based liquefaction characterization

Cho, Gye-Chun; Lee, JS, ADVANCED NONDESTRUCTUVE EVALUATION I, PTS 1 AND 2, PROCEEDINGS BOOK SERIES: KEY ENGINEERING MATERIALS, v.321-323, pp.1403 - 1406, 2006

16
매립 폐기물의 분리토사에 대한 지반공학적 특성

박현일; 정순용; 이승래; 도남영, 대한토목학회 논문집C, v.24, no.4c, pp.243 - 249, 2004-07

rss_1.0 rss_2.0 atom_1.0