Browse by Subject 열교환기

Showing results 1 to 15 of 15

1
An experimental and analytical study of externally condensing heat exchangers for PCCS with an air holdup tank = 공기 수집 탱크를 활용한 PCCS용 관외 응축 열교환기의 실험 및 해석적 연구link

Jeon, Byong Guk; 전병국; et al, 한국과학기술원, 2015

2
Experimental studies of effect of tube location and arrangement on heat transfer characteristics for plate-finned tube heat exchanger = 평판형 휜-관 열교환기에서의 관의 위치 및 배열에 따른 열전달 특성에 대한 실험적 연구link

Kim, Jin-Yoon; 김진윤; et al, 한국과학기술원, 2002

3
SI엔진에서 배기온도 저감을 위한 열교환기의 열해석

하미드라자; 이석환; 배충식, 한국자동차공학회 2003년 추계학술대회, v.3, pp.366 - 371, 한국자동차공학회, 2003-11

4
가솔린 엔진에서 배기 온도 저감을 위한 열교환기 설계 최적화

이석환; 박정서; 배충식, 한국자동차공학회 논문집, v.15, no.3, pp.10 - 17, 2007-05

5
가솔린 엔진의 배기 열교환기가 촉매 온도에 미치는 영향에 관한 연구

이석환; 배충식, 한국자동차공학회 논문집, v.12, no.2, pp.9 - 16, 2004-03

6
가스 엔진 열펌프의 성능 개선을 위한 실외기 내부유동 해석 = Flow analysis about the outdoor unit of a gas engine driven heat pump system for performance improvementlink

금승환; Keum, Seung-Hwan; et al, 한국과학기술원, 2003

7
극저온 추진제 고밀도화 기술동향 및 적용방안

조남경; 한상엽; 김영목; 정상권, 한국추진공학회지, v.9, no.3, pp.133 - 144, 2005-06

8
밀집형 열교환기의 휜성능에 관한 수치적 연구 = Numerical investigation of fin performance for a compact heat exchangerlink

유재욱; You, Jae-Wook; et al, 한국과학기술원, 1998

9
배기 열교환기를 이용한 가솔린 엔진 촉매 열열화 방지 및 연비 개선 = Application of an exhaust heat exchanger to protect the catalyst and improve the fuel economy in a spark-ignition enginelink

이석환; Lee, Seok-Hwan; et al, 한국과학기술원, 2005

10
에어컨 실외기 열교환기 구조물의 굽힘 소성 가공 해석 및 설계 = Analysis and design of elastoplastic bending process for air conditioner outdoor unit heat exchangerslink

김문홍; Kim, Moon-Hong; et al, 한국과학기술원, 2013

11
열교환기가 촉매온도에 미치는 영향에 관한 연구

이석환; 배충식, 한국자동차공학회 2003년 춘계학술대회, v.3, pp.78 - 83, 한국자동차공학회, 2003-05

12
유동층열교환기에서의 기포특성 = Bubble characteristics in a fluidized bed heat exchangerlink

안정렬; Ahn, Jung-Yeul; et al, 한국과학기술원, 2001

13
일렬로 배치된 원관들이 관통하는 사각 평판 휜의 전도 형상 계수 산정 및 근사 표현 = Calculation and approximate expression of conduction shape factors in rectangular plate fins with in-line tubeslink

성시경; Sung, Si-Kyong; et al, 한국과학기술원, 1999

14
일반적인 밀집형 열교환기의 성능 예측을 위한 전산 코드의 개발 = Development of a computational analysis for performance prediction of general compact heat exchangerlink

최영철; Choi, Young-Chul; et al, 한국과학기술원, 1998

15
혼합냉매 줄톰슨 냉동기를 위한 마이크로 채널 인쇄기판형 열교환기 설계에 관한 연구 = Investigation on microchannel printed circuit heat exchanger characteristic for the mixed refrigerant Joule Thomson refrigeratorlink

백승환; Baek, Seung-Whan; et al, 한국과학기술원, 2013

rss_1.0 rss_2.0 atom_1.0