Browse by Type Thesis(Ph.D)

Showing results 14841 to 14860 of 15737

14841
유도전동기의 소음/진동 특성 분석 및 고정자와 회전자 사이에서의 분포된 전자기적 가진 입력의 간접적 추정 = Noise/vibration analysis of induction motors and indirect identification of distributed electromagnetic excitation forces between stator and rotorlink

조대현; Cho, Dae-Hyeon; et al, 한국과학기술원, 1998

14842
유도탄 생존성 향상을 위한 유도법칙 연구 = Advanced missile guidance laws for enhancing survivabilitylink

이진익; Lee, Jin-Ik; et al, 한국과학기술원, 2006

14843
유동 박리의 유무에 따른 평판 경계층 확산화염의 구조에 관한 연구 = Boundary layer diffusion flame in the presence and absence of flow separationlink

하지수; Ha, Ji-Soo; et al, 한국과학기술원, 1990

14844
유동장과 전기장의 복합장에서 쌍극자를 갖는 고분자 용액의 해석 = Analysis of solutions of rigid macromolecules with dipoles in hydrodynamic and electric fieldslink

권무현; Kwon, Moo-Hyun; et al, 한국과학기술원, 1992

14845
유동층 반응기에서 분무에 의한 입자 성장 = Particle growth in a fluidized bed by solution spraylink

강신이; Kang, Shine-E.; et al, 한국과학기술원, 1990

14846
유동층 반응기에서 폐타이어 가스화 특성 = Gasification characteristics of waste tire in a fluidized bed reactorlink

이정수; Lee, Jung-Soo; et al, 한국과학기술원, 1996

14847
유동층을 이용한 폐타이어의 연소 및 열분해 특성 = Combustion and pyrolysis characteristics of waste tire in a fluidized bed reactorlink

김정래; Kim, Jung-Rae; et al, 한국과학기술원, 1994

14848
유력 영역의 심플렉스화에 의한 효율적인 전체 최적화 알고리즘 개발 = Develpment of an efficient global optimization algorithm by simplex eliminationlink

오승환; Oh, Seung-Hwan; et al, 한국과학기술원, 2001

14849
유선곡률과 균일전단에 의한 난류생성의 상호작용에 관한 실험적 연구 = An experimental investigation of the interactive turbulence production between streamline curvature and uniform shearlink

임효재; Lim, Hyo-Jae; et al, 한국과학기술원, 1995

14850
유연 금속 패턴의 레이저 응용 제조에 관한 연구 = A study on laser applied fabrication of flexible metal patternlink

강봉철; Kang, Bong-Chul; et al, 한국과학기술원, 2011

14851
유연모재 위에 올려진 나노소재기반 투명 전도성 박막의 파손기구 및 전기-기계적 거동 = Failure mechanism and electro-mechanical behavior of nanomaterials based transparent conducting films on flexible substratelink

이정환; Lee, Jeong-Hwan; et al, 한국과학기술원, 2017

14852
유연성을 고려한 날개 표면의 신뢰성 기반 최적설계 연구 = A study on the reliability based design optimization of wing surface considering wing flexibilitylink

이재훈; Lee, Jae-Hun; et al, 한국과학기술원, 2009

14853
유연한 팔을 갖는 여유자유도 로봇 매니퓰레이터의 진동 감소를 위한 입력 설계에 관한 연구 = Input design of a flexible redundant manipulator for end-point vibration reductionlink

김선재; Kim, Seon-Jae; et al, 한국과학기술원, 1998

14854
유연한 플래핑 날개의 공탄성 특성 및 유체-구조 연계해석에 관한 연구 = A study on aeroelastic characteristics and fluid-structure interaction of a flexible flapping winglink

김대관; Kim, Dae-Kwan; et al, 한국과학기술원, 2008

14855
유인원 로봇 시스템의 보행과 자세에 관한 연구 = (A) study on walking and posture for anthropoid robot systemlink

윤병호; 김수현; et al, 한국과학기술원, 2018

14856
유전 경화 모니터링을 이용한 후판 복합재료의 스마트 성형 기법 = Smart cure process for thick composites using dielectric cure monitoringlink

김형근; Kim, Hyoung-Geun; et al, 한국과학기술원, 2003

14857
유전 알고리즘과 큰 요소를 사용한 대형 강산란 유전체의 반복 역산란 = Iterative inversion for a large high-contrast two-dimensional dielectric object by using the genetic algorithm and the larger cell divisionlink

양상용; Yang, Sang-Yong; et al, 한국과학기술원, 1997

14858
유전성 및 자성 손실재를 함유한 광대역 전자기파 흡수 복합재료의 실험적 연구 = Experimental study of broadband electromagnetic wave absorbing composites containing dielectric and magnetic lossy materialslink

박기연; Park, Ki-Yeon; et al, 한국과학기술원, 2009

14859
유전자 알고리즘을 이용한 전체/다목적 최적화 알고리즘의 개발 = Development of a global/multicriteria optimization algorithm based on the genetic algorithmlink

이준배; Lee, Jun-Bae; et al, 한국과학기술원, 1996

14860
유전자 연산과 Hydraulic-Connectivity를 이용한 상수관망의 신뢰최적 설계에 관한 연구 = Reliability constrained optimal design of water distribution networks using the genetic algorithm and hydraulic-connectivitylink

신현곤; Shin, Hyun-Gon; et al, 한국과학기술원, 2000

rss_1.0 rss_2.0 atom_1.0