1 | A study of fabrication of Cr-alloyed cast iron-cast steel composite by the centrifugal casting process H.W.Shin; C.S.Kang; Z.H.Lee, 한국주조공학회지, v.9, no.2, pp.143 - 151, 1989 |
2 | A study on boundary conditions of piston thermal loading analysis in internal combuston engines D.S.chung; Y.S.Cho; H.O.Choi; Z.H.Lee, 대한기계학회논문집, v.12, no.3, pp.528 - 532, 1988 |
3 | A study on the chracteristics of hard anodized film of Al-Si alloys J.W.Moon; Z.H.Lee; H.S.Kwon, 한국표면공학회지, v.23, no.1, pp.34 - 43, 1990 |
4 | A study on the degassing of gas-atomized Al-alloy powders Y.C.Suh; D.S.Cho; Z.H.Lee, 대한금속·재료학회지, v.31, no.7, pp.929 - 938, 1993 |
5 | An inverse distribution of hardness in T5-heat treated Al-alloy permanebt mold castings Z.H.Lee, 한국주조공학회지, v.8, no.9, pp.282 - 286, 1988-09 |
6 | Application of bulk talc to molding material M.J.Ha; Z.H.Lee; S.S.Lee; H.J.Eun, 한국주조공학회지, v.14, pp.45 - 51, 1994 |
7 | Computer Simulation of spray Deposition process with Reciprocating Nozzle B.C.Moon; Z.H.Lee, 대한금속·재료학회지, v.32, no.8, pp.923 - 930, 1994 |
8 | Drop Tube 에서의 열전달 계산 및 응용 H.J.Ham; W.Y.Yoon; C.S.Kang; Z.H.Lee, 대한금속·재료학회지, v.29, no.1, pp.80 - 87, 1991 |
9 | Effect of Mg-content on degassing of AlSi7Mg by C2Cl6-tablet Z.H.Lee; U.J.Chung, 대한금속·재료학회지, v.20, no.4, pp.337, 1982 |
10 | Effect of Si content and flow rate on the formation and mechanical properties of hard anodized film of Al-Si alloys K.T.Kim; M.K.Ahn; Z.H.Lee; H.S.Kwon, 한국표면공학회지, v.24, no.4, pp.179 - 186, 1991 |
11 | Growth and characterization of LiNbO3 single crystals J.Y.Son; K.S.No; Z.H.Lee, 한국결정성장학회지, v.2, pp.43 - 50, 1992 |
12 | Heat transfer from cast metal to mold:solidification time and cooling ability of various molds Z.H.Lee, 한국주조공학회지, v.1, no.1, pp.11 - 930, 1981 |
13 | In situ temperature measurement during spray forming of A2-tool steel and axisymmetric two-dimensional analysis B.C.Moon; Z.H.Lee; D.R.White; E.J.Lavernia, JOURNAL OF MATERIALS RESEARCH, v.15, no.8, pp.1669 - 1678, 2000-08 |
14 | Mg-loss during degassing of Al-alloy melt by C2Cl6-tablet Z.H.Lee, 한국주조공학회지, v.1, no.3, pp.14, 1981 |
15 | Reduction of computing time through FDM using implicit method and latent heat treatment in solidification analysis T.G.Kim; J.K.Choi; C.P.Hong; Z.H.Lee, 한국주조공학회지, v.13, pp.323 - 332, 1993 |
16 | Review on the basic theory on crystalline rapid solidification Z.H.Lee, 한국주조공학회지, v.9, no.4, pp.278, 1989 |
17 | The effect of gap between ingot and crucible on the distribution of initial melt cocentration in bridgman crystal growth S.M.Chung; M.S.Kang; Z.H.Lee, 한국결정성장학회지, v.4, no.2, pp.169 - 177, 1994 |
18 | The Formation of Nitrogen Gas Pore During Solidification of 16Cr-3Ni Stainless Steels S.H.Yang; D.H.Kim; Y.H.Park; Z.H.Lee, 한국주조공학회지, v.23, no.3, pp.147 - 152, 2003 |
19 | Three dimensional solidification analysis in automotive cast piston J.J.Kim; J.S.Kim; G.H.Ryu; J.G.Choi; Z.H.Lee; C.P.Hong, 한국주조공학회지, v.13, no.3, pp.268 - 275, 1993 |