Power and area saving concepts such as operational amplifier (opamp) bias current reuse and capacitive level shifting are used to lower the analog power of a 10-bit pipelined analog-to-digital converter (ADC) to 220 mu W/MHz. Since a dual-input bias current reusing opamp performs as two opamps, the opamp summing nodes can be reset in every clock cycle. By using only N-channel MOS (NMOS) input stages, the capacitive level shifter simplifies the gain-boosting amplifier design and enables fast opamp settling with low power-consumption. The prototype achieves 9.2/8.8 effective number of bits (ENOB) for I- and 20-MHz inputs at 50 MS/s. The ADC works within the temperature range of 0 degrees to 85 degrees C and the supply voltage from 1.62 to 1.96 V with little measured loss in the ENOB. The chip consumes 18 mW (11 mW for the analog portion of the ADC and 7 mW for the rest including buffers) at 1.8 V, and the active area occupies 1.1 x 1.3 mm(2) using a 0.18-mu m complementary metal oxide semiconductor (CMOS) process.