We present a convenient post-fabrication tuning method that uses photobleaching to adjust the center wavelength of the polymeric grating-assisted codirectional coupler filter. The passive polymer waveguide is used as a low-loss optical path and the electro-optic (EO) polymer waveguide is used for dropping the optical signal at a given wavelength. Photobleaching reduces the effective index of the EO polymer waveguide, which makes it possible to adjust the center wavelength. We call easily realize the filters with a desired center wavelength by exposing ultraviolet light on them with a proper energy even after finishing the device fabrication. The center wavelength is decreased by 25 nm with a photobleaching energy of 180 J/cm(2) without extra loss. (C) 2001 Elsevier Science B.V. All rights reserved.