8941 | 내연기관 피스톤-링 결합체 마찰력 측정 시스템의 개발 및 마찰력 측정에 관한 연구 = A study on the development of piston-ring assembly friction force measuring system and its measurement in I.C. engineslink 윤정의; Yun, Jeong-Eui; et al, 한국과학기술원, 1993 |
8942 | 내연기관의 피스톤계 마찰 거동 해석 = Analysis of piston assembly frictional behavior in an internal combustion enginelink 조성우; Cho, Sung-Woo; et al, 한국과학기술원, 2000 |
8943 | 넓은 속도범위의 혈류 이미징을 위한 하이브리드 빔스캐닝 방식의 정량적 혈류 및 혈관분포구조 광간섭단층영상 = Hybrid beam scanning based quantitative OCT angiography for wide dynamic range blood flow speed imaginglink 박태진; 오왕열; et al, 한국과학기술원, 2018 |
8944 | 논홀로노믹 이륜 도립진자형 주행로봇의 개발 = Development of nonholonomic two-wheeled inverted pendulum type mobile robotlink 김연훈; Kim, Yeon-Hoon; et al, 한국과학기술원, 2006 |
8945 | 높은 CO2 부분압 조건에서 CaCO3 흡착제 입자의 로 내 탈황 반응 특성 연구 및 반응 모델 개발 = Characteristic study and modeling of the in-furnace desulfurization of CaCO3 sorbent particles under high CO2 partial pressurelink 정성하; Jeong, Seongha; et al, 한국과학기술원, 2015 |
8946 | 능동 자기베어링에 기반한 무진공 소형 초원심분리기에 관한 연구 = (A) study on vacuum-chamber free small ultra-centrifuge based on active magnetic bearinglink 이민구; 김수현; et al, 한국과학기술원, 2018 |
8947 | 능동 창문 시스템을 이용한 저주파 대역 실내 소음제어 = Low frequency interior noise control with active window systemlink 권병호; Kwon, Byoung-Ho; et al, 한국과학기술원, 2013 |
8948 | 능동식 현가시스템용 전자비례 유압 감압밸브의 해석 및 설계에 관한 연구 = Dynamic analysis and design of an electro-hydraulic pressure reducing valve for active suspension systemslink 이동음; Lee, Dong-Eum; et al, 한국과학기술원, 1997 |
8949 | 능동형 주파수 선택막이 적용된 스텔스 레이돔에 관한 연구 = Study on stealth radome with actvie frequency selective surfacelink 손대성; 이정률; et al, 한국과학기술원, 2021 |
8950 | 니켈 - 텅스텐 담지촉매에서 에틸벤젠의 수소화 알킬기 제거반응 = Hydrodealkylation reaction of ethylbenzene over supported nickel - tungsten catalystlink 송요순; Song, Yo-Soon; et al, 한국과학기술원, 1992 |
8951 | 니켈-티타늄 형상기억합금의 압축하중 사이클을 이용한 양방향 형상기억거동의 특성에 관한 연구 = Characteristics of two-way shape memory behavior induced by compressive loading cycles in NiTi shape memory alloylink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2009 |
8952 | 니켈과 니켈기 합금에서 입계 각짐 현상과 입자성장 = Grain boundary faceting and grain growth in Ni and Ni alloyslink 이성보; Lee, Sung-Bo; et al, 한국과학기술원, 1998 |
8953 | 니켈기 초내열 합금에서 α-W 입자의 석출거동 및 고온강도에 미치는 영향 = The influence of α-W particles on the high temperature strength of Ni-base superalloylink 김현태; Kim, Hyon-Tae; et al, 한국과학기술원, 1998 |
8954 | 니켈기 초내열합금에서 감마프라임 석출물의 수지형성장 및 파형입계형성 = The dendritic growth of γ'-precipitates and grain boundary serration in Nickel-base superalloyslink 유영수; Yoo, Young-Soo; et al, 한국과학기술원, 1993 |
8955 | 니켈기 초내열합금에서 피막처리가 고온 기계적 성질및 미세조직에 미치는 영향 = A study on the effects of a coating treatment on the high temperature mechanical properties and microstructure in a nickel-base superalloylink 강석봉; Kang, Suck-Bong; et al, 한국과학기술원, 1986 |
8956 | 니켈기지 합금의 응력부식균열시 음향방출신호의 특성 = Characteristics of acoustic emission during stress corrosion cracking of nickel base alloylink 성게용; Sung, Key-Yong; 김인섭; 윤영구; et al, 한국과학기술원, 1997 |
8957 | 다 배열 단층촬영장치를 이용한 폐결절 진단을 위한 자동 검출 알고리즘에 관한 연구 = A study on computer aided detection algorithm for pulmonary nodule using multi-detector CTlink 김진성; Kim, Jin-Sung; et al, 한국과학기술원, 2007 |
8958 | 다가 영상의 해석과 이를 이용한 영상 특징치 추출 및 구현에 관한 연구 = A study on feature extraction and its implementation using analysis of multivalued imagelink 오영석; Oh, Young-Seok; et al, 한국과학기술원, 1991 |
8959 | 다결정 실리콘 패드와 이중 절연막을 이용한 신구조 안티퓨즈 소자 연구 = Study on the new antifuse device with double dielectric layers on a poly-silicon padlink 백종태; Baek, Jong-Tae; et al, 한국과학기술원, 1996 |
8960 | 다공성 poly(styrene-divinylbenzene)막을 이용한슬폰산 수지촉매의 비활성화 특성 및 일산화탄소와 수소의 선택적 투과특성에 관한 연구 = A study on porous poly(styrene-divinylbenzene) membrane;its deactivationbehavior of sulfonic acid resin catalyst and selective permeation characteristics for carbon monixide and hydrogenlink 지용채; Chee, Yong-Chae; et al, 한국과학기술원, 1987 |
8961 | 다국어 정보검색을 위한 영-한 음차 표기 및 복원 모델 = An English-Korean transliteration and retransliteration model for cross-lingual information retrievallink 이재성; Lee, Jae-Sung; et al, 한국과학기술원, 1999 |
8962 | 다기능성 탄소나노튜브 섬유의 제조 공정 및 특성 연구 = Fabrication process and properties characterization of multifunctional carbon nanotube fiberlink Ryu, Seong-Woo; 류성우; et al, 한국과학기술원, 2012 |
8963 | 다단 로켓 단분리용 선형 화약 폭굉의 구조 응답 특성 = Structural response for detonation of linear shaped explosive in multistage rocketlink 최승혁; 권세진; et al, 한국과학기술원, 2023 |
8964 | 다면체 모델의 최적 2.5D CNC 가공경로에 관한 연구 = A study on the optimum 2.5D CNC milling paths for a polyhedral modellink 김현철; Kim, Hyun-Chul; et al, 한국과학기술원, 2005 |
8965 | 다방향으로 입체 보강된 복합재료의 기계적 물성치 예측 = Prediction of mechanical properties for spatially reinforced compositeslink 유재석; Yoo, Jae-Seok; et al, 한국과학기술원, 2002 |
8966 | 다분할 사다리꼴 자석배열을 이용한 초정밀 선형위치결정 기구의 설계와 구동 = Design and actuation of precision linear positioning system with multi-segmented trapezoidal magnet arraylink 이문구; Lee, Moon-Gu; et al, 한국과학기술원, 2003 |
8967 | 다상연계 개념에 기초한 새로운 공탄성 해석 기법 개발 = The development of a new aeroelastic analysis method based on the multi-phase interaction perspectivelink 이승준; Lee, Seung-Jun; et al, 한국과학기술원, 2010 |
8968 | 다수무장-다수표적에 대한 실시간 동적 교전 할당 알고리즘 연구 = A study on real time dynamic multi-weapon multi-target assignment algorithmlink 이준복; Lee, Jun-Bog; et al, 한국과학기술원, 2009 |
8969 | 다수의 마이크로폰을 이용한 실내 벽면의 어드미턴스 및 소음원 재구성 = Reconstruction of surface admittance and interior noise sources by using multiple microphoneslink 김영기; Kim, Young-Key; et al, 한국과학기술원, 1999 |
8970 | 다양한 주기적 마스크 패턴에 따른 표면 플라즈몬 리소그래피의 구현 및 해석 = Numerical and experimental studies on surface plasmon lithography using various periodic mask patternslink 김은성; Kim, Eun-Sung; et al, 한국과학기술원, 2014 |
8971 | 다양한 하중 조건에서 솔더 조인트의 신뢰성 평가 기술 및 수명 예측 모델 개발 = Development of the Evaluation Techniques and Life Prediction Model for Solder Joints under Various Loading Conditionslink 김일호; Kim, Il-ho; et al, 한국과학기술원, 2008 |
8972 | 다이아몬드의 전압 인가에 의한 핵생성 기구에 대한 연구 = A study on the bias-enhanced nucleation mechanism of diamondlink 최균; Choi, Kyoon; et al, 한국과학기술원, 1997 |
8973 | 다입력-단일출력계 모형을 이용한 소음/진동원 규명에 관한 연구 = Source identification methods by multiple-input/single output modelinglink 배병국; Bae, Byung-Kook; et al, 한국과학기술원, 1998 |
8974 | 다중 Junction에 의한 음파 및 전자파 산란 해석 = Acoustic/electromagnetic wave scattering from multi-junctionslink 권재용; Kwon, Jae-Yong; et al, 한국과학기술원, 2002 |
8975 | 다중 격자 기법을 위한 navier-stokes solver의 수렴 특성에 대한 연구 = A study on the convergence characteristics of navier-stokes solver for the multigrid methodlink 김윤식; Kim, Yoon-Sik; et al, 한국과학기술원, 2004 |
8976 | 다중 구조 비선형성을 고려한 미사일 조종날개의 공탄성 해석 = Aeroelastic analysis of missile fin considering multiple structural nonlinearitieslink 서영진; Seo, Young-Jin; et al, 한국과학기술원, 2010 |
8977 | 다중 구형 마이크로폰 어레이를 사용한 3차원 음원 위치 추정에 관한 연구 = 3D sound source localization technique for multiple spherical microphone arrayslink 유재현; 최정우; et al, 한국과학기술원, 2022 |
8978 | 다중 로봇의 동적 해석과 설계에의 응용 = Dynamic analysis and application to the design of multi-arm robotlink 김충영; Kim, Choong-Young; et al, 한국과학기술원, 1997 |
8979 | 다중 작업을 위한 여유 자유도 머니퓰레이터의 경로 계획 = Path planning of redundant manipulators with multiple criterialink 성영휘; Sung, Young-Whee; et al, 한국과학기술원, 1996 |
8980 | 다중 재생물질을 사용하는 적층 능동형 자기 재생 냉동기에 대한 연구 = Study on the layered active magnetic regenerative refrigerator with multi-magnetic refrigerantlink 김영권; Kim, Young-Kwon; et al, 한국과학기술원, 2012 |
8981 | 다중 주파수를 사용한 유전체의 초고주파 영상 = Microwave incoherent imaging of a dielectric object by using a coherent multi-frequency sourcelink 강진섭; Kang, Jin-Seob; et al, 한국과학기술원, 1994 |
8982 | 다중 홈 노즐을 이용한 고유량 정전분무 특성 연구 및 바이오에어로졸과 PLGA 입자 발생에의 응용 = Characteristics of high flow rate electrospray using multiplexed grooved nozzles and application to generation of bioaerosols and PLGA particleslink 김경태; Kim, Kyoung-Tae; et al, 한국과학기술원, 2008 |
8983 | 다중 효용 증발부 내에서의 3차원 열 및 물질전달 해석 = Three-dimensional heat and mass transfer analysis for a multi-effect evaporatorlink 박일석; Park, Il-Seouk; et al, 한국과학기술원, 2001 |
8984 | 다중감각통합을 통한 전신선형운동지각 = Multi-sensory integration for the whole body linear motion perceptionlink 이용우; Yi, Yong-Woo; et al, 한국과학기술원, 2011 |
8985 | 다중센서 융합기반 보행자 보호를 위한 자동긴급제동시스템 설계 = Design of autonomous emergency braking system to protect pedestrians based on multi-sensor fusionlink 이혁기; 권동수; et al, 한국과학기술원, 2018 |
8986 | 다중연료(CNG-Diesel) 예혼합 압축착화 엔진 성능개선을 위한 흡기 제어 전략 = Improvement of engine performance by charge air control strategy on dual-fuel(CNG-Diesel) premixed charge compression ignition enginelink 심의준; 배충식; et al, 한국과학기술원, 2019 |
8987 | 다중의 주입 전극을 갖는 패브리 페롯 레이저 다이오드를 이용한 경제적인 파장분할 다중방식 수동형 광가입자망 = Cost-effective WDM-PON using multiple contact F-P LDslink 문실구; Mun, Sil-Gu; et al, 한국과학기술원, 2010 |
8988 | 다중화 기법에 의한 광섬유 브래그 격자 센서를 이용한 스마트 복합재 구조물의 변형률 모니터링에 관한 연구 = The strain monitoring of smart composite structures using fiber bragg grating sensors by multiplexing methodlink 류치영; Ryu, Chi-Young; et al, 한국과학기술원, 2001 |
8989 | 다차원 색인을 이용한 밀도 기반 클러스터링의 하향식 접근 방법 = A top-down approach for density-based clustering using multidimensional indexeslink 황재준; Hwang, Jae-Joon; et al, 한국과학기술원, 2004 |
8990 | 다차원 색인을 이용한 시간 집계 처리 = Temporal aggregation using a multi-dimensional indexlink 우준호; Woo, Joon-Ho; et al, 한국과학기술원, 2004 |
8991 | 다차원 온라인 분석처리(MOLAP)에서의 집계 질의 처리 = Aggregation query processing in multidimensional OLAP (MOLAP)link 이영구; Lee, Young-Koo; et al, 한국과학기술원, 2002 |
8992 | 다차원 화일구조의 물리적 설계기법 및 객체지향 데이타베이스 색인기법에의 응용 = A physical design method for multidimensional file organizations and its application to indexing in object-oriented databaseslink 이종학; Lee, Jong-Hak; et al, 한국과학기술원, 1997 |
8993 | 다층 구조 투명 전도막의 열화 현상 개선을 위한 합금 연구 = Study on the Ag-alloy for the improvement of degradation resistance in the transparent conductive multilayer film systemlink 노희숙; Roh, Hee-Sook; et al, 한국과학기술원, 2008 |
8994 | 다층 신경회로망을 이용한 GMA 용접 공정에서의 용융지의 크기 예측 및 제어에 관한 연구 = A study on the estimation and control of weld pool sizes in GMA welding processes using multilayer perceptronslink 임태균; Lim, Tae-Gyoon; et al, 한국과학기술원, 1993 |
8995 | 다층 퍼셉트론 신경회로망의 학습가속을 위한 새로운 중간층 오차함수와 최적 학습률 = Fast training of multilayer perceptrons with a new error function for hidden layer and optimum learning rateslink 오상훈; Oh, Sang-Hoon; et al, 한국과학기술원, 1999 |
8996 | 다층구조 투명전도막의 전기적, 광학적 특성 및 내구성 연구 = The electrical, optical properties and durability of transparent conductive multilayer systemlink 조선희; Cho, Sun-Hee; et al, 한국과학기술원, 2011 |
8997 | 다파장 간섭계를 이용한 위상 물체의 2차원 굴절률 분포와 두께 측정을 위한 분리 알고리즘 = Separation algorithm for 2D refractive index distribution and thickness profile of phase object using multi-wavelength interferometrylink 이광천; Lee, Kwang-Chun; et al, 한국과학기술원, 2009 |
8998 | 단결정, 일방향응고, 다결정 TiAl+Mo합금의 미세조직과 기계적 성질 = Microstructure and mechanical properties of single-, DS- and poly-crystalline TiAl+Mo alloyslink 김민철; Kim, Min-Chul; et al, 한국과학기술원, 1997 |
8999 | 단결정을 이용한 Al-Li 합금의 석출강화기구 연구 = Study of the precipitation strengthening mechanisms of Al-Li alloys using the Al-Li single crystalslink 전성민; Jeon, Seong-Min; et al, 한국과학기술원, 1994 |
9000 | 단계적 도면 인식을 통한 3차원 CAD 모델의 복원 = Reconstruction of 3D CAD model using stepwise recognition of 2D drawinglink 이한민; Lee, Han-Min; et al, 한국과학기술원, 2005 |