DC Field | Value | Language |
---|---|---|
dc.contributor.author | Choi, Byoung Kyu | ko |
dc.contributor.author | Kim, DH | ko |
dc.contributor.author | Jerard, RB | ko |
dc.date.accessioned | 2008-01-28T08:48:18Z | - |
dc.date.available | 2008-01-28T08:48:18Z | - |
dc.date.created | 2012-02-06 | - |
dc.date.created | 2012-02-06 | - |
dc.date.issued | 1997 | - |
dc.identifier.citation | COMPUTER-AIDED DESIGN, v.29, pp.657 - 669 | - |
dc.identifier.issn | 0010-4485 | - |
dc.identifier.uri | http://hdl.handle.net/10203/2967 | - |
dc.description.abstract | Presented in the paper is a new approach to 3-axis NC tool-path generation for sculptured surface machining. In the proposed C-space approach, the geometric data describing the design-surface and stock-surface are transformed into C-space elements, and then, all the tool-path generation decisions are made in the configuration space (C-space). The C-space approach provides a number of distinctive features suitable for high speed machining of dies and moulds, including: (1) gouge-free and collision-free tool-paths; (2) balanced cutting-loads; (3) smooth cutter movements; and (4) verification mechanisms. It is suggested, with some supportive results, that the Z-map model might be a suitable representation scheme for implementing the C-space method. Also discussed are other implementation as well as future research directions. (C) 1997 Elsevier Science Ltd. | - |
dc.language | English | - |
dc.language.iso | en_US | en |
dc.publisher | ELSEVIER SCI LTD | - |
dc.subject | FREE-FORM SURFACES | - |
dc.subject | NC | - |
dc.title | C-space approach to tool path generation for die and mould machining | - |
dc.type | Article | - |
dc.identifier.wosid | A1997XX83200007 | - |
dc.identifier.scopusid | 2-s2.0-0346678011 | - |
dc.type.rims | ART | - |
dc.citation.volume | 29 | - |
dc.citation.beginningpage | 657 | - |
dc.citation.endingpage | 669 | - |
dc.citation.publicationname | COMPUTER-AIDED DESIGN | - |
dc.embargo.liftdate | 9999-12-31 | - |
dc.embargo.terms | 9999-12-31 | - |
dc.contributor.localauthor | Choi, Byoung Kyu | - |
dc.contributor.nonIdAuthor | Kim, DH | - |
dc.contributor.nonIdAuthor | Jerard, RB | - |
dc.type.journalArticle | Article | - |
dc.subject.keywordAuthor | tool-path generation | - |
dc.subject.keywordAuthor | high speed machining | - |
dc.subject.keywordAuthor | sculptured surface machining | - |
dc.subject.keywordAuthor | die-cavity machining | - |
dc.subject.keywordAuthor | C-space | - |
dc.subject.keywordAuthor | Z-map model | - |
dc.subject.keywordPlus | FREE-FORM SURFACES | - |
dc.subject.keywordPlus | NC | - |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.